Abstract:PVT, saturated liquid density and two-phase (vapor-pressure) properties of one of the main component of the biofuel (methyl palmitate), produced from a soybean, have been measured. One-phase PVT measurements were made for ten liquid and four vapor isochores between (85.2 and 811.7) kg·m−3over the temperatures range from (300 to 443) K using a constant-volume piezometer technique. The vapor-pressures ( P S , T S ) of the methyl palmitate were measured in the temperature range from (300 to 501) K. The combined expanded uncertainty of the density, ρ , pressure, P, and temperature, T, measurements at 95% confidence level with a coverage factor of k = 2 is estimated to be 0.1%, (0.15–0.5)% depending on temperature and pressure ranges, and 15 mK, respectively. We have critically assessed all of the reported density data at atmospheric pressure and at high-pressures and vapor-pressures together with the present results for their internal thermodynamic consistence to carefully select primary data to fit reference correlations for ρ 0 ( T ) and vapor-pressure P S ( T ) . The measurements were concentrated in the two-phase region to accurately determine vapor-pressures and in the immediate vicinity of the phase-transition temperatures to precisely determine the phase boundary properties ( P S , T S , ρ S ) on the liquid + gas equilibrium curve. The liquid-gas phase transition temperatures ( T S ) for seven liquid isochores of (711.9, 766.8, 774.5, 782.3, 795.00, 803.40, and 811.70) kg·m−3were accurately obtained using the isochoric (P-T) break point technique. The measured values of the vapor-pressures and saturated liquid densities were fitted to Wagner-type vapor-pressure equation and complete scaling model, respectively. The values of the critical parameters ( P C , T C , ρ C ) were estimated using vapor-pressure and liquid-gas coexistence curve data. The correlation for the density at atmospheric pressure, ρ 0 ( T ) , together with the present and reported high-pressure density measurements ( ρ , P , T ) were used to develop two-parametric ( c and B ) and theoretically based Tait-type equation of state.

Speed of Sound, Density, and Derivative Properties of Ethyl Myristate, Methyl Myristate, and Methyl Palmitate under High Pressure

Isobaric Heat Capacity Measurements for Dimethyl Ether and 1,1-Difluoroethane in the Liquid Phase at Temperatures from 305 K to 365 K and Pressures Up to 5 Mpa

Measurements and Correlations of Density, Viscosity, and Vapor Pressure for Methyl Ricinoleate

Speed of sound, density, and compressibility of alkyl-benzenes as a function of pressure and temperature: Heptadecylbenzene and octadecylbenzene

Speed of sound, density, and compressibility of alkylbenzenes as a function of pressure and temperature: Tridecylbenzene and pentadecylbenzene

Measurement and Correlation of the Density, Viscosity and Vapor Pressure of Fatty Acid 2-Ethyhexyl Esters

Density, Speed of Sound, and Viscosity for Binary Liquid Mixtures of 2-(2-Ethoxyethoxy)ethanol with Methyl Acrylate, Ethyl Acrylate, or Butyl Acrylate from T = 288.15 to 318.15 K and P = 101 kPa

Excess Molar Enthalpies of Dimethyl Carbonate and (butanol Isomers and 1-Pentanol) at T = (298.15, 313.15, and 328.15) K and P = (0.1, 1.0, and 10.0) MPa

PVT, saturated liquid density and vapor-pressure measurements of main components of the biofuels at high temperatures and high pressures: Methyl palmitate

Speed of Sound Measurements for Liquid Squalane Up to a Pressure of 20 MPa

The speed of sound in two methane-rich gas mixtures at temperatures between 250 K and 350 K and at pressures up to 20 MPa

Excess Molar Enthalpies of Methyl Acetate and (1-Propanol, 2-Propanol, 1-Butanol, 2-Butanol, and 1-Pentanol) at T = (298.15 and 308.15) K and P = (5.0 and 10.0) MPa

Experimental Measurements and Modeling of Density and Viscosity for Methyl Caprate + 1-Alkanol at Atmospheric Pressure and Different Temperatures

Density, Viscosity, and Vapor Pressure of 1,1,3,5,5-Pentamethyl-3-phenyltrisiloxane, 3-(Dimethylsilyloxy)-1,1,5,5-tetramethyl-3-phenyltrisiloxane, and 1,1,5,5-Tetramethyl-3,3-diphenyltrisiloxane

Excess Molar Enthalpies of Methylformate+(1-Propanol, 2-Propanol, 1-Butanol, 2-Butanol and 1-Pentanol) at T=298.15K, P=(5.0, 10.0)mpa, and Methylformate+1-Propanol at T=333.15K, P=10.0mpa

Speed of Sound Measurements of Binary Mixtures of Difluoromethane (R-32) with 2,3,3,3-Tetrafluoropropene (R-1234yf) or trans-1,3,3,3-Tetrafluoropropene (R-1234ze(E)) Refrigerants

Speed of Sound Measurements of Binary Mixtures of 1,1,1,2-Tetrafluoroethane (R-134a), 2,3,3,3-Tetrafluoropropene (R-1234yf), and trans-1,3,3,3-Tetrafluoropropene (R-1234ze(E)) Refrigerants

Speed of sound for three binary ($CH_{4}$ + $H_{2}$) mixtures from $p$ = (0.5 up to 20) MPa at $T$ = (273.16 to 375) K

[Research on Raman Spectra of 2-Methylpentaneat at Pressure of 0-1.5 GPa and Temperature of 26 Degrees C].

Speed of Sound Measurements of R-1130(E) and an Azeotropic Blend of R-1336mzz(Z)/1130(E)

Research on Raman Spectra of Isooctane at Ambient Temperature and Ambient Pressure to 1.2 GPa