Abstract:The development of solid oxide fuel cells (SOFCs) faces impediments in terms of challenges associated with oxygen reduction activity and CO2 durability. Therefore, a series of novel composite cathode materials, consisting of NdBa0.5Sr0.5Co2O5+δ (NBSC) and Gd0.1Ce0.9O2-δ (GDC), were designed and synthesized using a one-pot strategy through a self-assembly process. The incorporation of GDC leads to a significant increase in the number of active sites. Furthermore, it alters the anisotropic transport properties of oxygen ions within layered double perovskite materials, consequently creating a three-dimensional conduit for O2- transportation. Simultaneously, the in-situ formation of closely intertwined heterogeneous interfaces between NBSC and GDC particles can facilitate the charge transfer processes and oxygen ion transport, thereby improving the kinetics of the oxygen reduction reaction (ORR). The NBSC-10GDC cathode, prepared through the one-pot method, exhibits reduced polarization resistances and enhanced CO2 tolerance in comparison to the mechanically mixed cathode. At 750 °C, the one-pot NBSC-10GDC exhibits a low area-specific resistance (ASR) of 0.029 Ω cm2, which is 69.8% lower than the ASR of single-phase NBSC and 42.0% lower than mechanically mixed NBSC-10GDC. Additionally, the one-pot NBSC-10GDC demonstrates a remarkable maximum power density (MPD) of 1.36 W cm-2 at 750 °C. These findings highlight the considerable potential of the one-pot NBSC-10GDC as a promising material for SOFC cathode.

Nanostructured La0.5Ba0.5CoO3 as cathode for solid oxide fuel cells

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Nanostructured LnBaCo2O6-d (Ln = Sm, Gd) with layered structure for Intermediate Temperature SOFC cathodes

Single crystalline La0.5Sr0.5MnO3 microcubes as cathode of solid oxide fuel cell

Characterization of Cation-Ordered Perovskite Oxide LaBaCo2O5+δ As Cathode of Intermediate-Temperature Solid Oxide Fuel Cells

Oxygen reduction mechanisms in nanostructured La0.8Sr0.2MnO3 cathodes for Solid Oxide Fuel Cells

Fabrication of LnBaCo2O5 +δ-La10Si6O27 Composite Cathode for Solid Oxide Fuel Cells

Preparation, Structure and Performance of La0.6Sr0.4Co0.2Fe0.8O3 Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Fabrication and Performance of La, Co-Substituted SrTiO3 As Cathode Materials of Solid Oxide Fuel Cell

Tailoring the Activity Via Cobalt Doping of a Two-Layer Ruddlesden-Popper Phase Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Co-synthesis of LSCFN-GDC Electrode for Symmetric Solid Oxide Fuel Cell Running on Propane

Nanostructured Lscf-GDC Cathodes Via a Sol–Gel Method for High Performance Solid Oxide Fuel Cells

Nb and Pd co-doped La0.57Sr0.38Co0.19Fe0.665Nb0.095Pd0.05O3-δ as a stable, high performance electrode for barrier-layer-free Y2O3-ZrO2 electrolyte of solid oxide fuel cells

Enhanced oxygen reduction reaction of LaSrCoO4–Ce0.9Mn0.1O2 composite cathode for solid oxide fuel cells

A/B-site co-doping enabled fast oxygen reduction reaction and promoted CO2 tolerance of perovskite cathode for solid oxide fuel cells

High-performance La0.5(Ba0.75Ca0.25)0.5Co0.8Fe0.2O3-δ cathode for proton-conducting solid oxide fuel cells

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

BaCo0.7Fe0.2Nb0.1O3−δ As Cathode Material for Intermediate Temperature Solid Oxide Fuel Cells

Nb5+-Doped SrCoO3-δ Perovskites as Potential Cathodes for Solid-Oxide Fuel Cells

Nano La0.6Ca0.4Fe0.8Ni0.2O3−δ Decorated Porous Doped Ceria As a Novel Cobalt-Free Electrode for “symmetrical” Solid Oxide Fuel Cells

In situ self-assembled NdBa0.5Sr0.5Co2O5+δ/Gd0.1Ce0.9O2-δ hetero-interfaces enable enhanced electrochemical activity and CO2 durability for solid oxide fuel cells