Abstract:The established linear fatigue life prediction model based on the Miner rule has been widely applied to fatigue life prediction under constant amplitude uniaxial and multiaxial loading. Considering the physical significance of crack formation and propagation, a multiaxial equivalent linear fatigue life prediction model is put forward based on Miner rule and critical plane method under constant amplitude loading. The essence of this approach is that the equivalent strain, which consists of the shear strain and normal strain on the critical plane, replaces the relevant parameter of uniaxial nonlinear fatigue damage model. The principal axes of stress/strain rotate under non-proportional loading. Meanwhile, the microstructure of material and slip systems change, which lead to additional hardening effect. The ratio of cyclic yield stress to static yield stress is used to represent the cyclic hardening capacity of material, and the influence of phase difference and loading condition on the non-proportional hardening effect is considered. The multiaxial fatigue life is predicted using equivalent stain approach, maximum shear stain amplitude model, CXH model, and equivalent multiaxial liner model under proportional and/or non-proportional loading. The smooth and notched fatigue specimens of four kinds of materials (Q235B steel, titanium alloy TC4, Haynes 188, and Mod.9Cr-1Mo steel) are used in the multiaxial fatigue experiments to verify the proposed model. The predicted results of these materials are compared with the test results, and the results show that these four models can achieve good effect under proportional loading, but the proposed model performs better than the other three models under non-proportional loading. Meanwhile, it also verifies that the proposed enhancement factor can reflect the influence of phase difference and material properties on additional hardening.

Asymmetrical multiaxial low-cycle fatigue behavior and life prediction of CP-Ti under non-proportional stress-controlled mode

Multiaxial low cycle fatigue behavior and life prediction of CP‐Ti under non‐proportional stress‐controlled mode

Improvement Of Cyclic Void Growth Model For Ultra-Low Cycle Fatigue Prediction Of Steel Bridge Piers

Low cycle fatigue behavior of CP-Ti under multiaxial load-controlled mode at different multiaxial stress ratios

A New Approach to Low-Cycle Fatigue Damage Based on Exhaustion of Static Toughness and Dissipation of Cyclic Plastic Strain Energy During Fatigue

Comparison of multiaxial low cycle fatigue behavior of CP-Ti under strain-controlled mode at different multiaxial strain ratios

Modeling of Low Cycle Behavior of P92 Steel Based on Cyclic Plasticity Constitutive Equations

Multiaxial high-cycle fatigue failure and life prediction based on critical plane method

In‐plane biaxial ratcheting effect and low‐cycle fatigue behavior of CP‐Ti based on DIC method

Multiaxial Fatigue Damage Parameter and Life Prediction without Any Additional Material Constants

High-cycle and low-cycle fatigue life prediction under random multiaxial loadings without cycle counting

Multiaxial Notch Fatigue Life Prediction Based on the Dominated Loading Modes under Variable Amplitude Loading

Development of improved Manson-Coffin model considering the effect of yield stress under asymmetrical cyclic loading

A new multiaxial fatigue life prediction model considering additional hardening effect

The mean stress and phase angle effect on multiaxial fatigue behavior of a TiAl alloy: Failure analysis and life modeling

Multiaxial Fatigue Lifetime Estimation Based on New Equivalent Strain Energy Damage Model under Variable Amplitude Loading

Notch Fatigue Life Prediction Considering Nonproportionality of Local Loading Path under Multiaxial Cyclic Loading

An improved critical plane-energy multiaxial fatigue life prediction model considering shear mean stress

Two-Parameter Characterization of Low Cycle, Hysteretic Fatigue Data

Multiaxial fatigue life prediction for metals by means of an improved strain energy density-based critical plane criterion

Multiaxial notch fatigue life prediction based on the dominated loading control mode under variable amplitude loading