Abstract:Three-dimensional (3D) bioprinting, as a freeform biomedical manufacturing approach, has been increasingly adopted for the fabrication of constructs analogous to living tissues. Generally, materials printed during 3D bioprinting are referred as bioinks, which may include living cells, extracellular matrix materials, cell media, and/or other additives. For 3D bioprinting to be an enabling tissue engineering approach, the bioink printability is a critical requirement as tissue constructs must be able to be printed and reproduce the complex micro-architecture of native tissues in vitro in sufficient resolution. The bioink printability is generally characterized in terms of the controllable formation of well-defined droplets/jets/filaments and/or the morphology and shape fidelity of deposited building blocks. This review presents a comprehensive overview of the studies of bioink printability during representative 3D bioprinting processes, including inkjet printing, laser printing, and micro-extrusion, with a focus on the understanding of the underlying physics during the formation of bioink-based features. A detailed discussion is conducted based on the typical time scales and dimensionless quantities for printability evaluation during bioprinting. For inkjet printing, the Z (the inverse of the Ohnesorge number), Weber, and capillary numbers have been employed for the construction of phase diagrams during the printing of Newtonian fluids, while the Weissenberg and Deborah numbers have been utilized during the printing of non-Newtonian bioinks. During laser printing of Newtonian solutions, the jettability can be characterized using the inverse of the Ohnesorge number, while Ohnesorge, elasto-capillary, and Weber numbers have been utilized to construct phase diagrams for typical non-Newtonian bioinks. For micro-extrusion, seven filament types have been identified including three types of well-defined filaments and four types of irregular filaments. During micro-extrusion, the Oldroyd number has been used to characterize the dimensions of the yielded areas of Herschel-Bulkley fluids. Non-ideal jetting behaviors are common during the droplet-based inkjet and laser printing processes due to the local nonuniformity and nonhomogeneity of cell-laden bioinks.

The evolution of print defects in inkjet printers at elevated print gap height

Dynamics of Liquid Transfer from Nanoporous Stamps in High-Resolution Flexographic Printing

Droplet Deviation Modeling and Compensation Scheme of Inkjet Printing

Droplet Jetting of Piezoelectric Printhead and Corresponding Effect Factors

Evaluation of Bioink Printability for Bioprinting Applications

Printability of inkjet according to supply pressure

Jetting and droplet formation of particle-loaded fluids

Selective Evaporation at the Nozzle Exit in Piezoacoustic Inkjet Printing

The roles of wettability and surface tension in droplet formation during inkjet printing

Droplet Morphology Analysis of Drop-on-demand Inkjet Printing

SPATIOTEMPORAL FUSION NETWORK FOR THE DROPLET BEHAVIOR RECOGNITION IN INKJET PRINTING

In-Flight Imaging of Aerosol Jet Printer Droplets to Enable Spatially Resolved Flow Rate Measurements

Effects of Nozzle and Fluid Properties on the Drop Formation Dynamics in a Drop-on-demand Inkjet Printing

Model calibration in inkjet printing process

Deformation characteristics of a single droplet driven by a piezoelectric nozzle of the drop-on-demand inkjet system

Spreading of Low-viscosity Ink Filaments Driven by Bath Viscoelasticity in Embedded Printing

Design and Fabrication of A Piezoelectric Bend Mode Drop-On-Demand Inkjet Printhead with Interchangeable Nozzle

Stability of line shapes in inkjet printing at low substrate speeds

Mechanisms of inkjet printing in a liquid environment

Effect of Process Parameters on the Performance of Drop-On-Demand 3D Inkjet Printing: Geometrical-Based Modeling and Experimental Validation

Dynamics of individual inkjet printed picoliter droplet elucidated by high speed Laser Speckle Imaging