Spreading of Low-viscosity Ink Filaments Driven by Bath Viscoelasticity in Embedded Printing

Jae Hyung Cho,Emilie Dressaire

DOI: https://doi.org/10.1103/PhysRevApplied.22.034050

2024-09-24

Abstract:Inks deposited in conventional direct ink writing need to be able to support their own weight and that of the upper layers with minimal deformation to preserve the structural integrity of the three-dimensional (3D) printed parts. This constraint limits the range of usable inks to high-viscosity materials. Embedded printing enables the use of much softer inks by depositing the materials in a bath of another fluid that provides external support, thus diversifying the types of 3D printable structures. The interactions between the ink and bath fluids, however, give rise to a unique type of defect: spreading of the dispensed ink behind the moving nozzle. By printing horizontal threads made of dyed water in baths of Carbopol suspensions, we demonstrate that the spreading can be attributed to the pressure field generated in the viscous bath by the relative motion of the nozzle. As the pressure gradient increases with the viscosity of the bath fluid while the viscosity of the ink resists the flow, a larger bath-to-ink viscosity ratio results in more spreading for low-concentration Carbopol baths. For high-concentration, yield-stress-fluid baths, we find that the steady-state viscosity alone cannot account for the spreading, as the elastic stress becomes comparable to the viscous stress and the bath fluid around the dispensed ink undergoes fluidization and resolidification. By parameterizing the transient rheology of the high-concentration Carbopol suspensions using a simple viscoelastic model, we suggest that the ink spreading is exacerbated by the elasticity but is mitigated by the yield stress as long as the yield stress is low enough to allow steady injection of the ink. These results help illuminate the link between the bath rheology and the printing quality in embedded 3D printing.

Fluid Dynamics,Soft Condensed Matter

What problem does this paper attempt to address?

The paper primarily explores the diffusion issue of low-viscosity ink in the bath during the embedded 3D printing process. Specifically:

1. **Research Background**:
- Conventional Direct Ink Writing (DIW) technology requires the ink to have sufficient viscosity to support its own weight and the upper structure, which limits the types of materials that can be used for 3D printing.
- Embedded 3D printing, by depositing ink in a supportive fluid bath, allows the use of lower viscosity inks, thereby expanding the types of printable structures.

2. **Main Issues**:
- During the embedded 3D printing process, the ink diffuses after the moving nozzle.
- This diffusion phenomenon affects the printing quality, especially when using low-viscosity inks.

3. **Research Objectives**:
- To study how the viscoelasticity of the bath affects the diffusion behavior of the ink.
- To explore the specific mechanisms and influencing factors of ink diffusion when using Carbopol suspensions of different concentrations as the bath.

4. **Experimental Methods**:
- Using dyed water as the ink, experiments were conducted in Carbopol suspensions of different concentrations.
- Adjusting the speed and concentration of the bath, observing and quantifying the diffusion length of the ink.

5. **Results and Findings**:
- For low-concentration Carbopol baths, the diffusion of the ink is mainly caused by the viscous pressure drop of the bath.
- High-concentration Carbopol baths exhibit yield stress characteristics, where the diffusion of the ink is influenced not only by viscous effects but also by elastic effects.
- The study shows that the viscoelasticity and yield stress of the bath jointly determine the extent of ink diffusion.

Through these studies, the paper aims to reveal the relationship between the rheological properties of the bath and the quality of embedded 3D printing, providing a theoretical basis for optimizing printing parameters.