Abstract:The encapsulation of active components is currently used as common methodology for the insertion of additional functions like self-healing properties on a polymeric matrix. Among the different approaches, polyurea microcapsules are used in different applications. The design of polyurea microcapsules (MCs) containing active diisocyanate compounds, namely isophorone diisocyanate (IPDI) or hexamethylene diisocyanate (HDI), is explored in the present work. The polyurea shell of MCs is formed through the interfacial polymerization of oil-in-water emulsions between the highly active methylene diphenyl diisocyanate (MDI) and diethylenetriamine (DETA), while the cores of MCs contain, apart from IPDI or HDI, a liquid Novolac resin. The hydroxyl functionalities of the resin were either unprotected (Novolac resin), partially protected (Benzyl Novolac resin) or fully protected (Acetyl Novolac resin). It has been found that the formation of MCs is controlled by the MDI/DETA ratio, while the shape and size of MCs depends on the homogenization rate applied for emulsification. The encapsulated active compound, as determined through the titration of isocyanate (NCO) groups, was found to decrease with the hydroxyl functionality content of the Novolac resin used, indicating a reaction between NCO and the hydroxyl groups. Through the thorough investigation of the organic phase, the rapid reaction (within a few minutes) of MDI with the unprotected Novolac resin was revealed, while a gradual decrease in the NCO groups (within two months) has been observed through the evolution of the Attenuated Total Reflectance—Fourier-Transform Infrared (ATR-FTIR) spectroscopy and titration, due to the reaction of these groups with the hydroxyl functionalities of unprotected and partially protected Novolac resin. Over longer times (above two months), the reaction of the remaining NCO groups with humidity was evidenced, especially when the fully protected Acetyl Novolac resin was used. HDI was found to be more susceptible to reactions, as compared with IPDI.

Catalysis of isocyanate reaction with water by DMF and its use for fast preparation of uniform polyurea microspheres through precipitation polymerization

Activation of a Palladium-Based Catalyst by Hexafluoroisopropanol for Polyketone Synthesis Via Homogeneous Solution Polymerization

Distribution of Hydrophilic Monomer Units and Its Effect on the Property of the Water Dispersion of Polyurethaneurea Anionomer

Polyurea Materials and Their Environmental Applications

Controlling the Synthesis of Polyurea Microcapsules and the Encapsulation of Active Diisocyanate Compounds

One-pot and One-step Cu(0)-mediated Reversible-Deactivation Radical Polymerization of N -Isopropylacrylamide (NIPAM) in Water

Synthesis of porous polyurea microspheres for matting coating

Controllable Preparation of Polyacrylamide Hydrogel Microspheres in A Coaxial Microfluidic Device

Rapid Synthesis of Polyimide Precursors by Solution Polymerization Using Continuous-flow Microreactors

Reaction kinetics and properties of MDI base poly (urethane-isocyanurate) network polymers

Characterization of an Aqueous Dispersion of a Hydrophilic Polyisocyanate for Waterborne Two-Pack Polyurethane Coatings

Facile and High-Yield Synthesis of Monodisperse and Heat-Resistant Polymaleimide Microspheres by Self-Stabilized Precipitation Polymerization

The multifaceted role of water as an accelerator of the crosslinking reaction of isocyanate-free polyurethane networks

Interfacial polymerization kinetics of polyurea microcapsules formed using HDB‐LV isocyanate

Isophorone Diisocyanate (IPDI) Microencapsulation for Mono-Component Adhesives: Effect of the Active H and NCO Sources

A novel method for the synthesis of solvent‐free and high‐solid‐content waterborne polyurethanes by introducing a small amount of polyethylene glycol

Facile Preparation of Raspberry-Like SiO2@Polyurea Microspheres with Tunable Wettability and Their Application for Oil-Water Separation

Preparation of organosilicon and organofluorine synergistically modified amphiphilic branched polyurethanes and their application in diisocyanate emulsifiers

Microfluidic-Assisted Synthesis Of Waterborne And Solvent-Free Urea-Crosslinked Polydimethylsiloxane Microparticles

One step preparation of porous polyurea by reaction of toluene diisocyanate with water and its characterization

Functional monodisperse microspheres fabricated by solvothermal precipitation co-polymerization