Abstract:With the ongoing changes in the modern world, the usage of renewable energy sources is increasing. The negative impact of fossil fuels on global warming has led to the search for clean energy sources. Wind energy, which is the most widely used of those sources, is discussed in this study. Numerous studies have been undertaken in this regard, but seismic effects are only newly being considered. In addition to having strong wind zones, Turkey is located in a geographical position through which active fault lines pass. The presence of high wind zones overlapping with these fault lines necessitates seismic analysis for turbines planned to be built in the country. Analysis of wind and seismic load simulation is difficult with traditional structural design programs. In this study, coefficients including wind loads are suggested for civil engineers who plan to analyze wind turbines with only seismic effects. For this purpose, a horizontal axis steel wind turbine with a 5 MW scale is analyzed in this work considering a series of wind and seismic loads in the area around Gelibolu. These environmental effects are evaluated under different operating conditions of the turbine, including normal operation with no earthquake loads, park condition with earthquake loads, idling condition with wind loads, normal operation with earthquake loads, and idling condition with earthquake and wind loads. The full system model of the turbine is developed with the FAST finite element program employing a special code for wind turbines developed by the National Renewable Energy Laboratory. As a result of the analysis, it is concluded that seismic loads acting with the wind significantly change the internal forces. Damping effects occur when seismic and wind loads act at the same time. For this reason, wind loads need to be reduced by a certain coefficient in some cases. Coefficients are proposed here for application in initial designs and load combinations for certain wind and earthquake conditions.

Study on the aerodynamic damping for the seismic analysis of wind turbines in operation

Assessment of the Peak Response of a 5MW HAWT under Combined Wind and Seismic Induced Loads

Study on Dynamic Characteristics of the Ower-Foundation of 1.5 MW Wind Turbine

SIMULATION OF FLUCTUATING WIND IN WIND FARM AND DYNAMIC RESPONSE OF WIND TURBINE TOWER

Studies on application of scissor-jack braced viscous damper system in wind turbines under seismic and wind loads

DANAMIC RESPONSE OF WIND TURBINE UNDER TYPHOON

Data driven damping separation method for the Mega-offshore wind turbine tower

Mitigation of coupled wind-wave-earthquake responses of a 10 MW fixed-bottom offshore wind turbine

Experimental and numerical investigations on seismic responses of wind turbine structures with amplifying damping transfer system

Wind-tunnel experimental study on identification of modal aerodynamic damping matrix for operating wind turbines

Dynamic Behavior of Piled Jacket Offshore Wind Turbines Based on Integrated Aero-Servo-hydro-ssi-owt Model

Experimental Study on Identification of Aerodynamic Damping Matrix for the Tower of an Operating Wind Turbine by Artificial Excitation

Vibration control of a monopile offshore wind turbines under recorded seismic waves

Effects of soil–structure interaction on the design of tuned mass damper to control the seismic response of wind turbine towers with gravity base

Vibration attenuation performance of wind turbine tower using a prestressed tuned mass damper under seismic excitation

Experimental study of wind turbine in operation under wind and seismic excitations with soil-structure interaction

Vibration Control of a Jacket Offshore Wind Turbine Under Earthquake Wind and Wave Loads by Tuned Mass Damper

Numerical study on aerodynamic damping of floating vertical axis wind turbines

Optimization Study of a Tuned Mass Damper for a Large Monopile Wind Turbine

Design Principles for Wind Turbine Earthquake and Wind Load Combinations

Vibration control of jacket offshore wind turbine subjected to earthquake excitations by using friction damper