Abstract:Development of miniaturized electronics has stimulated demand for integration of energy storage units with electronic circuits. Micro-supercapacitors can be a promising strategy for future application in microelectric devices because of their properties of high power density, high-rate capability, long lifetime and high-frequency response. Progress in micro-fabrication technology has enabled on-chip micro-supercapacitors in an interdigitated planar form be compatible with integrated circuit. From a material perspective, nanostructured carbon-based materials are commonly used in electric double-layer micro-supercapacitors. In addition, transition metal oxides such as ruthenium oxide and manganese oxide, and some conducting polymers such as polypyrrole and polyaniline have been used as electrodes for pseudo-capacitive micro-supercapacitors. MnO2-based pseudocapacitive electrodes have been considered as a promising candidate because of their high theoretical specific capacitance (1,370 F/g), environmentally friendly nature and low cost of raw materials. The main drawback of MnO2 is that the poor conductivity may limit the charge/discharge rate for high-power applications. However, Lang et al. have show that hybrid structures made of nanoporous gold and nanocrystalline MnO2 have enhanced conductivity, resulting in a specific capacitance close to the theoretical value (~1,145 F/g)[1]. The nanoporous gold not only plays a role as a double-layer capacitor, but also promotes electron transport through the MnO2 and benefits fast ion diffusion between the MnO2 and the electrolytes. Besides, the excellent mechanical properties enable nanoporous gold to be amenable to micro-fabrication processes[2]. The high specific capacitances and charge/discharge rates offered by such nanoporous gold/MnO2 hybrid structures make them promising candidates as electrodes in micro-supercapacitors. Herein, we make our efforts in preparing high-performance nanoporous gold/MnO2 hybrid electrodes by electrodepositon method and fabricating micro-supercapacitors in interdigitated planar form. Our electrodeposited nanoporous gold/MnO2hybrid electrodes also have a specific capacitance close to the theoretical value (>1,000 F/g). The preparation and performance of hybrid electrodes and micro-supercapacitors will be presented. 1. Lang, X.Y., et al., . Nature Nanotechnology, 2011. 6(4): p. 232-236. 2. Jin, H.J. and J. Weissmüller, Science, 2011. 332: p. 1179-1182.

Hybridized 1T/2H-MoS2/graphene fishnet tube for high-performance on-chip integrated micro-systems comprising supercapacitors and gas sensors

Optical Micro/nanofibre Embedded Soft Film Enables Multifunctional Flow Sensing in Microfluidic Chips

NiS-MoS2 Hetero-nanosheet Arrays on Carbon Cloth for High-Performance Flexible Hybrid Energy Storage Devices

Multiwalled Carbon Nanotube-N-Doped Graphene/Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) Nanohybrid for Electrochemical Application in Intelligent Sensors and Supercapacitors

Electron Transport and Ion Diffusion in Hydrogen‐Bonded Interlayer Cross‐Linked Graphene/MXene for Wearable Micro‐Sensors

Hierarchical Ordered Dual‐Mesoporous Polypyrrole/Graphene Nanosheets as Bi‐Functional Active Materials for High‐Performance Planar Integrated System of Micro‐Supercapacitor and Gas Sensor

On-chip Interdigitated Supercapacitor Based on Nano-Porous Gold/manganese Oxide Nanowires Hybrid Electrode

Flexible Solid-State Zn-Co MOFs@MXene Supercapacitors and Organic Ion Hydrogel Sensors for Self-Powered Smart Sensing Applications

A dual CoNi MOF nanoshee/nanotube assembled on carbon cloth for high performance hybrid supercapacitors

Enhanced pseudocapacitive performance of MoS2 by introduction of both N-GQDs and HCNT for flexible supercapacitors

Interdigital MnO2/PEDOT Alternating Stacked Microelectrodes for High‐Performance On‐Chip Microsupercapacitor and Humidity Sensing

High-Performance Microsupercapacitors based on Bio-Inspired Graphene Microfibers.

Interfacial modulation strategy using poly(3,4-ethylenedioxythiophene)-poly(4-styrenesulfonate) (PEDOT:PSS) and ultrathin two-dimensional metal-organic framework nanosheets for wearable supercapacitors: Solution engineering

Scalable fabrication of in-plane microscale self-powered integrated systems for fast-response and highly selective dual-channel gas detection

Multifunctional Mesoporous Polyaniline/Graphene Nanosheets for Flexible Planar Integrated Microsystem of Zinc Ion Microbattery and Gas Sensor

Carbon nanotubes interpenetrating MOFs-derived Co-Ni-S composite spheres with interconnected architecture for high performance hybrid supercapacitor

On-Chip Micro-supercapacitors Based on Nanoporous-Gold/ MnO2 Hybrid Electrodes

A dual CoNi MOF nanosheet/nanotube assembled on carbon cloth for high performance hybrid supercapacitors

SWCNT-bridged laser-induced graphene fibers decorated with MnO2 nanoparticles for high-performance flexible micro-supercapacitors

Hexaazatriphenylene-doped MXene Films for the High-Performance Micro-Supercapacitors and Wearable Pressure Sensor System

Designing of high performance MoS2@VZnS//AC hybrid batterysupercapacitor device for the electrochemical energy storage and glucose detection