Abstract:The bearing property and deformation failure law of the CFST circular arch were investigated in order to provide direction for the optimization of the concrete-filled steel tube (CFST) support. The flexural bearing capacity test of the 194 mm × 10 mm CFST was performed initially in this study. It was primarily explored how bearing capacity and deformation of circular arches were affected by the slip of the arch foot and anti-bending strengthening, and the neutral layer migration rule and anti-bending strengthening mechanism of circular arches were examined. The bearing performance of the circular arch under the condition of the concentrated load of the vault and the usual uniform load of the entire span is then simulated in an orthogonal test by numerical simulation in order to extend the experimental investigation. The effect of variables including the steel tube’s outer diameter, thickness, slip of the arch foot, and the ratio of the arch rise to span on the bearing capacity of the circular arch is examined. The study demonstrates that under focused stress on the arch top or full-span normal uniform loading, the arch foot slip is the most important element impacting the CFST support’s bearing capacity. In steel tubes with the same outer diameter and wall thickness, the vector span ratio has a bigger influence than anti-bending strengthening. When the span ratio is the same, the influence of the outer diameter and wall thickness are equal and outweigh the influence of bending strengthening. The circular arch with an outside diameter of 168 mm, a wall thickness of 10 mm, and a rise-span ratio of 0.207 has the best performance characteristics under the influence of concentrated load, and the ultimate failure mechanism is local waist drum deformation failure. Based on the aforementioned study findings, the circular CFST support’s buckling deformation and drum deformation are examined, and a composite support consisting of “anchor net spray + CFST support” is directed for the north three deep track downhill of Yangcheng Coal Mine. Two failure types expose the failure mechanism and provide a technique for optimization. The support had contributed to the circular CFST arc arch’s best bearing performance in the event of waist drum deformation and failure.

Flexural performance of curved-pultruded GFRP arch beams subjected to varying boundary conditions

Developing an Innovative Curved-Pultruded Large-Scale GFRP Arch Beam

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Investigation on Flexural Performance of RC Beams Flexurally Strengthened by Side-bonded CFRP Laminates

Innovating arch structures with fiber-reinforced polymer composites: A review

Behavior of Cross Arms Inserted in Concrete-Filled Circular GFRP Tubular Columns

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Experimental Investigation into Flexural-Torsional Ultimate Resistance of Steel Circular Arches

Flexural Behaviors of CFRP Strengthened Laminated Bamboo Arches

Behavior of concrete voussoir flexible arch bridges reinforced with FRP composites

Enhancing Flange Local Buckling Strength of Pultruded GFRP Open-Section Beams

Flexural Performance of Sandwich Beams with Lattice Ribs and a Functionally Multilayered Foam Core

Bending Performance of GFRP-wood Sandwich Beams with Lattice-Web Reinforcement in Flatwise and Sidewise Directions

Flexural Behavior of Novel Hybrid Multicell GFRP-concrete Beam

CFRP Strengthening Reinforced Concrete Arches: Strengthening Methods and Experimental Studies

Flexural Behavior of Innovative Glass Fiber-Reinforced Composite Beams Reinforced with Gypsum-Based Composites

Flexural Behavior of PVA‐FRC GFRP Reinforced Concrete Beams

Flexural responses and pseudo-ductile performance of lattice-web reinforced GFRP-wood sandwich beams

Experimental research and engineering application on bearing capacity of concrete-filled steel tube circular arch

Design and Application of Arched Structure Beam with FRP

GFRP-concrete hybrid beams under flexural loading: Experimental investigation