Abstract:For newly developed measuring systems, it is easy to estimate type-B uncertainties based on technical data from the measuring modules applied. However, it is difficult to estimate A-type uncertainties due to the unknown type and level of interferences infiltrating the measuring system. This is a particularly important problem for measurements carried out in the presence of typical of power grid disturbances. The aim of the research was to develop a method and a measurement stand for experimental assessment of uncertainties in a measuring system that makes use of data acquisition modules containing analog-to-digital converters (ADCs). The paper describes, in detail, the design of a completed test stand. It presents an original application in the LabVIEW environment, which enables testing the dependence of the uncertainties with the quantity of the measurements averaged in a series, for different kinds and levels of interferences infiltrating the measuring path. The results of tests for several popular measuring modules are presented. An analysis of the determined uncertainties was carried out in relation to the parameters of the tested measurement modules and for various levels of interferences. It is proved that an increase in the number of averaged measurements to approx. 100–200 always results in a decrease in uncertainty for each tested module and under all conditions. However, a further increase in the quantity of measurements, even up to 1000 averaged measurements, proved reasonable only for high-accuracy modules, in particular with a high level of interferences. An excessive increase in the quantity of averaged measurements proved a low effect for modules characterised by a low resolution and with a low level of interferences. The measurement results also proved that when estimated, uncertainties in the interference probability distribution are significant, especially if they deviate from normal distribution.

Parameters and Methods for ADCs Testing Compliant With the Guide to the Expression of Uncertainty in Measurements

The Influence of Noise Level on the Value of Uncertainty in a Measurement System Containing an Analog-to-Digital Converter

Improved Static Testing of A/D Converters for DC Measurements

Experimental Comparison of Different Standards for Dynamic Characterization of ADCs

Fundamentals in Measurement: The Role of Measurement Uncertainty in Conformity Assessment: Some Examples

High-Precision ADC Testing with Relaxed Reference Voltage Stationarity.

Use of the Monte Carlo method for the estimation of measurement uncertainty in chemical analysis systems with intensive mathematical treatment

Design and implementation of a platform for experimental testing and validation of analog-to-digital converters: static and dynamic parameters

Study on Random-Fuzzy Variables Method for ADC Measurement Uncertainty Evaluation

Comparison of Monte Carlo Simulation, Least Square Fitting and Calibration Factor Methods for the Evaluation of Measurement Uncertainty Using Direct Pressure Indicating Devices

Full information ADC test procedures using sinusoidal excitation, implemented in MATLAB and LabVIEW

Testing and optimizing ADC performance: a probabilistic approach

ADC Testing With Verification

Sensitivity and Uncertainty Analysis of Nonideal Calibration Standards for 16-Term Error Model

Signature Testing and Diagnosis of High Precision S? ADC Dynamic Specifications Using Model Parameter Estimation

Design of MultiChannel Parallel Dynamic Testing Virtual Instrument Based on Dynamic Measurement

Getting started with uncertainty evaluation using the Monte Carlo method in R

Analytical performance specifications for combined uncertainty budget in the implementation of metrological traceability

A brief guide to measurement uncertainty (IUPAC Technical Report)

Testing development for ADC on automatic test system