Abstract:The realization of the necessary energy-efficient technological solutions for the production of highly porous SiC-ceramic materials requires appropriate research. The results of developing energy-efficient one-step methods for the synthesis of porous SiC-based ceramics and studying the characteristics of the obtained ceramics are presented. The effect of the morphology of initial powders on the synthesized product is considered. Ultrafine silicon carbide powders of two types, identical in characteristic particle size, but quite different in the surface morphology, were used as fillers in the synthesis of experimental samples of porous ceramics. The first one was obtained by the traditional furnace method (SiC f ), the second one was synthesized by the technology of self-propagating high-temperature synthesis (SiC shs ). It is shown that the particle morphology of initial powder components determines the structural parameters and characteristics of synthesized porous ceramics. The pore space parameters (average pore size, specific surface area, equivalent hydraulic diameter, permeability, etc.) can vary significantly. Porous ceramic materials synthesized on the basis of SiC f have an open porosity of 47%, high liquid permeability (up to 2 mDarcy), overwhelming dominance of α-SiC phase, and a narrow pore distribution with an average pore size of about 1 μm. High open porosity (more than 58 %), highly developed nanostructured pore space surface with an area of more than 12 m 2 /g, and wider pore size distribution (average pore size — 140 nm) are observed in porous ceramic materials based on SiC shs . The obtained results can be used to improve energy-efficient synthesis technologies and methods for predicting the properties of highly porous SiC-based ceramic materials. This will make it possible to create highly porous SiC ceramics within a priory predicted limits of effective applicability for the processes of ultrafiltration or catalysis.

Analysis of Porous Structures of Crystalline Particles with Anisotropic Surface Energy by the Sintering Simulation

Monte-Carlo simulation of isotropic and anisotropic grain growth in liquid phase sintered ceramics

The Effects of Processing Parameters on the Properties of Micro-Scale Porous Surface for a Micro-Channel Reactor

Monte-Carlo simulation of grain growth in Vapor-Liquid-Solid phase sintered material

Monte-carlo modeling for grain growth process in Vapor-Liquid-Solid phase sintered materials

Modeling morphology evolution and densification during solid-state sintering via kinetic Monte Carlo simulation

Studies and Technical Development of Computer Simulation for Sintering and Grain Growth

Compaction and Sintering Effects on Scaling Law of Permeability-Porosity Relation of Powder Materials

Monte Carlo Simulation of Three-Dimensional Polycrystalline Material

A model for the sintering of spherical particles of different sizes by solid state diffusion

The effects of packing structure on the effective thermal conductivity of granular media: A grain scale investigation

Study of the effect of the morphology of initial powders on the structural and dimensional characteristics of SiC-based porous ceramic materials

An improved grand-potential phase-field model of solid-state sintering for many particles

Monte Carlo Simulation of Particle Coagulation and Sintering

Multi‐Scale Study of Sintering: A Review

2-D Phase-Field Simulation of Pore Evolution in Sintering Ceramics

A quantitative model to understand the microflow-controlled sintering mechanism of metal particles at nanometer to micron scale

Elucidating the Multi‐scale Temperature Evolution and Densification Mechanisms of Amorphous Powders during Spark Plasma Sintering: Experiments and Modeling

An Insight into Sintering Mechanisms of Silicon Carbide Nanoparticles with Additives Using MD Simulation

Porous SiC Ceramics with Controllable Porosity Achieved by Micro-sized Powder through Recrystallization Sintering

Kinetic Monte-Carlo simulations of sintering