Abstract:In polymer composites, the fiber–matrix interface is primarily influenced by the surface treatment of the fibers and polymer morphology. Previous studies have investigated the effect of surface treatment of carbon fiber on the mechanical properties of the resulting composites. However, very few studies have explored the chemical structural modification of polymer effect on the fiber–matrix adhesion. In this work, the interfaces of soft thermoplastic polyurethane (S-TPU) and hard-segmented TPU (H-TPU) were investigated through surface, thermal, and mechanical characterization. A textile-grade carbon fiber (TCF) with 1% concentration of epoxy sizing (an emerging material for nonaerospace applications with 450 K filament tows) was used as a reinforcement to investigate the structure–property relationship at the interface. Atomic force microscopy results showed 39% higher surface roughness for S-TPU than for H-TPU. X-ray photoelectron spectroscopy results revealed a 550% increase in CO content, which can provide multiple hydrogen bonding networks in H-TPU, and these CO bonds can produce a strong chemical bond at the fiber–matrix interface. Dynamic mechanical analysis and differential scanning calorimetry results confirmed the presence of hydrogen bonding that enhances the cross-linked density by 232% in H-TPU compared to S-TPU. The improved mechanical properties of H-TPU composites, such as flexural, impact and tensile by 30, 50, and 130% compared to S-TPU composites, prove that the crystallinity and hydrogen bonding significantly increase the load bearing capacity due to the strong interface. The mechanical properties of TCF–TPU composites validate the formation of chemical bonds through a nucleophilic addition reaction at the interface and improve the bond strength of the composites. Thus, tailoring the polyurethane structure broadens the performance of segmented TPU in conjunction with TCF reinforcement, which has implications for cost-effective, high-strength composites.

Study on epoxy bonding properties of thermoplastic polyurethane/polyphenylene sulfide composites reinforced by surface-modified basalt fiber

Study on the epoxy bonding properties of polyphenylene sulfide matrix composites reinforced by montmorillonite and basalt fiber

Polypropylene biocomposites reinforced with bamboo particles and ultrafine bamboo-char: The effect of blending ratio

Fabrication and reinforcement of ternary composites based on polypropylene matrix with bamboo particle/ultrafine bamboo-char

Enhanced interfacial and mechanical properties of basalt fiber reinforced poly(aryl ether nitrile ketone) composites by amino-silane coupling agents

Effect of basalt fiber on tribological and mechanical properties of polyether-ether-ketone (PEEK) composites

Synthesis and research of basalt microfiber‐reinforced polyurethane elastomer composites

Highly Enhancing the Interfacial and Mechanical Properties of Basalt Fiber/Poly(phthalazinone ether nitrile ketone) Composite by Thermoplastic Sizing Agents with Different Structures

Improved mechanical properties of basalt fiber/phthalonitrile composites modified by thermoplastic Poly(phthalazinone ether nitrile)s

Enhanced interfacial interaction, mechanical properties and thermal stability of basalt fiber/epoxy composites with multi-scale reinforcements

Surface Modification of Basalt Fibers with Improved Reactivity, Thermal Stability, and Tensile Strength

Effect of the Segmental Structure of Thermoplastic Polyurethane (Hardness) on the Interfacial Adhesion of Textile-Grade Carbon Fiber Composites

Surface sizing introducing carbon nanotubes for interfacial bond strengthening of basalt fiber–reinforced polymer composites

Synergetic control of multi‐level interface structure of basalt fibers by plasma and chemical functionalization to enhance the mechanical, thermal and interfacial performances of PBZ composites

Excellent and effective interfacial transition layer with an organic/inorganic hybrid carbon nanotube network structure for basalt fiber reinforced high-performance thermoplastic composites

Enhancing the foaming properties of polypropylene/basalt fiber composites by altering their rheological and crystallization behavior via polyethylene–octene blending modification

Mechanical and Thermal Properties of Basalt Fiber Reinforced Poly(butylene Succinate) Composites

Surface Modification of Poly(urea-formaldehyde) Microcapsules and the Effect on the Epoxy Composites Performance

Mechanical Properties and Characteristic of Surface Treated Bamboo Fiber Reinforced PP/PS Blends

Mechanical and Wear Properties of Polyetheretherketone Composites Filled with Basalt Fibres

Preparation and properties of poly (butylene adipate‐co‐terephthalate) composites with high bamboo flour content