Abstract:Backgrounds: Exposure to nanoparticles in the workplace is a health concern to occupational workers with increased risk of developing respiratory, cardiovascular, and neurological disorders. Based on animal inhalation study and human lung tumor risk extrapolation, current authoritative recommendations on exposure limits are either on total mass or number concentrations. Effects of particle size distribution and the implication to regional airway dosages are not elaborated. Methods: Real time production of particle concentration and size distribution in the range from 5.52 to 98.2 nm were recorded in a wire-cut electrical discharge machine shop (WEDM) during a typical working day. Under the realistic exposure condition, human inhalation simulations were performed in a physiologically realistic nasal and upper airway replica. The combined experimental and numerical study is the first to establish a realistic exposure condition, and under which, detailed dose metric studies can be performed. In addition to mass concentration guided exposure limit, inhalation risks to nano-pollutant were reexamined accounting for the actual particle size distribution and deposition statistics. Detailed dosimetries of the inhaled nano-pollutants in human nasal and upper airways with respect to particle number, mass and surface area were discussed, and empirical equations were developed. Results: An astonishing enhancement of human airway dosages were detected by current combined experimental and numerical study in the WEDM machine shop. Up to 33 folds in mass, 27 folds in surface area and 8 folds in number dosages were detected during working hours in comparison to the background dosimetry measured at midnight. The real time particle concentration measurement showed substantial emission of nano-pollutants by WEDM machining activity, and the combined experimental and numerical study provided extraordinary details on human inhalation dosimetry. It was found out that human inhalation dosimetry was extremely sensitive to real time particle concentration and size distribution. Averaged particle concentration over 24-h period will inevitably misrepresent the sensible information critical for realistic inhalation risk assessment. Conclusions: Particle size distribution carries very important information in determining human airway dosimetry. A pure number or mass concentration recommendation on the exposure limit at workplace is insufficient. A particle size distribution, together with the deposition equations, is critical to recognize the actual exposure risks. In addition, human airway dosimetry in number, mass and surface area varies significantly. A complete inhalation risk assessment requires the knowledge of toxicity mechanisms in response to each individual metric. Further improvements in these areas are needed.

Inhalation exposure to nanosized aerosols of disinfectants for the application of continuous releasing sprayers and fogger

Potential exposure of adults and children to particles from resuspended nano-enabled consumer sprays

Characteristics of exposure factors and inhalation exposure to selected spray consumer products in Korean population

Aerosolization System for Experimental Inhalation Studies of Carbon-Based Nanomaterials

Personal Exposure Assessment of School Children to Airborne Nanoparticles

[A Panel Study on the Acute Respiratory Effects of Ambient Particles of Different Sizes on Children in Shanghai].

Exposure to inhalable aerosols and their chemical characteristics from different potential factors in urban office environments

Risk assessment of particulate matter by considering time-activity-pattern and major microenvironments for preschool children living in Seoul, South Korea

Deposition of ambient ultrafine particles in the respiratory tract of children: A novel experimental method and its application

Monitoring of Bioaerosol Inhalation Risks in Different Environments Using a Six-Stage Andersen Sampler and the PCR-DGGE Method

A combined experimental and numerical study on upper airway dosimetry of inhaled nanoparticles from an electrical discharge machine shop

Particle Deposition in Respiratory Tracts of School-Aged Children

Numerical simulation for spatial distribution of water aerosol produced from nozzle spray and health risk related to Legionella pneumophila in spray scenarios

Real-time characterization of chemical threat agent aerosols for improvement of inhalation studies

Assessment of personal deposited dose and particle size distribution of bacterial aerosol in kindergarten located in southern Poland

Airborne Particles in Indoor Environment of Homes, Schools, Offices and Aged Care Facilities: the Main Routes of Exposure

Fine and ultrafine airborne PM influence inflammation response of young adults and toxicological responses in vitro

Equivalent titanium dioxide nanoparticle deposition by intratracheal instillation and whole body inhalation: the effect of dose rate on acute respiratory tract inflammation

Characteristics of Inhalable Bioaerosols on Foggy and Hazy Days and Their Deposition in the Human Respiratory Tract

Analysis of microparticle deposition in the human lung by taguchi method and response surface methodology

Development and evaluation of a low-cost aerosol generator for experimental inhalation exposure to particulate matter