Abstract:Aim: To compare the design, metallurgy, and mechanical properties of four heat-treated reciprocating instruments coupled with the evaluation of the irrigation flow using an in silico model. Methodology: New EdgeOne Fire Primary, Easy-File Flex Regular 25, WaveOne Gold Primary and Reciproc Blue R25 instruments (n = 124) were initially evaluated regarding their design through stereomicroscopy, scanning electron microscopy and 3D surface scanning. In addition, energy-dispersive X-ray spectroscopy was utilized to determine their elemental composition, and differential scanning calorimetry tests to evaluate their phase transformation temperatures. Their mechanical performance was further assessed through torsional and bending tests. Using scans obtained from a real tooth and the instruments, a computational fluid dynamics assessment was conducted to determine the irrigation flow pattern, apical pressure, and wall shear stress in simulated canal preparation. Mood's median and One-way anova post hoc Tukey tests were used for statistical comparisons (α = 5%). Results: Reciproc Blue exhibited a superior number of blades (n = 8), whereas EdgeOne Fire had the highest overall volume (4.38 mm3 ) and surface area (32.32 mm2 ). At the 3-mm axial level, EdgeOne Fire displayed the lowest core diameter (0.13 mm), while Reciproc Blue had the highest (0.16 mm). All blades were symmetrical, and the tips of the instruments were non-active but differed from each other. The most irregular surfaces were observed in EdgeOne Fire and Easy-File Flex. All instruments were manufactured from nickel-titanium alloys and exhibited distinct phase transformation temperatures. WaveOne Gold and Reciproc Blue demonstrated the highest maximum torque values (1.87 and 1.62 N cm, respectively), while the lowest was observed on EdgeOne Fire (1.21 N cm) (p < .05). The most flexible (p < .05) were EdgeOne Fire (angle of rotation: 602.6°; maximum bending load: 251.4 g.f) and Reciproc Blue (533.2° and 235.6 g.f). There were no significant differences observed in the irrigation flow among the four domains generated by the tested instruments. Conclusions: Despite observing variations in the design, phase transformation temperatures, and in the torsional and bending test outcomes among the four heat-treated reciprocating instruments, no significant differences were found in the irrigation flow pattern among the different groups in the simulated root canal preparations.

In vitro study of structural and chemical changes in two reciprocating files after multiple reuses and sterilisation

Effect of Autoclave Sterilization on the Number of Uses and Resistance to Cyclic Fatigue of WaveOne Gold and Four Replica-Like Endodontic Instruments

Shaping effectiveness and surface topography of reciprocating files after multiple simulated uses

Scanning electron microscopy analysis of conventional and controlled-memory nickel titanium files before and after multi-uses in root canals

Mechanical properties and metallurgical features of new and ex vivo used Reciproc Blue and Reciproc

ProFile Vortex instruments after clinical use: a metallurgical properties study

Cyclic fatigue resistance of two pediatric rotary files manufactured with different heat treatments: an in-vitro study

Cyclic fatigue and torsional strength of three different thermally treated reciprocating nickel-titanium instruments

Mechanical Performance and Metallurgical Characteristics of 5 Different Single-file Reciprocating Instruments: A Comparative In Vitro and Laboratory Study

Microbial Culture and Scanning Electron Microscopic Evaluation of Endodontic Hand Files: An In Vitro Study

ProFile Vortex and Vortex Blue Nickel-Titanium Rotary Instruments after Clinical Use

Characterization of four heat-treated reciprocating instruments: Design, metallurgy, mechanical performance, and irrigation flow patterns

Comprehensive Assessment of Cyclic Fatigue Strength in Five Multiple-File Nickel–Titanium Endodontic Systems

Effect of Different Nickel–Titanium Rotary Systems on Dentinal Crack Formation During Root Canal Preparation in Primary Molars: An in Vitro Study

Characterisation of Deformed or Separated Nickel-Titanium Retreatment Instruments after Clinical Use - A Multicentre Experience

In vitro evaluation of cyclic fatigue resistance of thermally treated novel nickel-titanium rotary instruments

An in vitro comparative evaluation of cyclic fatigue resistance of two rotary and two reciprocating file systems

Instrumentation time and effectiveness of hand and rotary files in a prototyped second mandibular primary molar: A micro-CT study

Nickel-Titanium Rotary Instruments: An In Vitro Comparison (Torsional Resistance of Two Heat-treated Reciprocating Files)

Cyclic Fatigue of Different Reciprocating Endodontic Instruments Using Matching Artificial Root Canals at Body Temperature In Vitro

Cyclic fatigue resistance of three rotary file systems in a dynamic model after immersion in sodium hypochlorite