Abstract:Needs for energy storage devices in modern-day applications such as electric vehicles and other high energy consuming portable electronics make the Lithium sulfur batteries (LSBs) to be one of the most attractive types since they offer a high theoretical energy density (2600 Wh kg -1 ), which is about an order of magnitude higher than the theoretical specific capacity of the lithium ion batteries. In addition, Sulfur is one of the most abundant materials in nature and moreover, a non-toxic element which makes the lithium sulfur battery a suitable candidate for commercialization. However, obstacles to overcome include the loss of active sulfur due to various phenomena mainly represented by polysulfide diffusion and reactivity on the lithium anode. Another serious issue observed in so many ways is the low electronic conductivity of Sulfur and its products such as Li 2 S as a result of cycling. These problems are often exacerbated at higher sulfur loading and lower electrolyte to sulfur ratios (E/S). One way to increase the sulfur loading is to increase the thickness of the cathode which in return increases the risk of low utilization of active material because of the high thickness and low wettability by electrolyte. Another way is to increases the ratio of the sulfur in respect to conductive host material without increasing the thickness of the cathode. By doing so, sulfur is going to fill all the pores existing in the host material and therefore, this structure cannot provide enough volume expansion during discharge process and as a result, the cathode structure may collapse and the whole cell fail. Therefore, to come up with a high performance and stable battery during cycling, there is no doubt that we have to focus on the structure of the cathode and the host material to effectively confine the sulfur and produced polysulfide and at the same time, alleviate the way of the electron transfer through the conductive network. In this research, we investigate some of the most influential parameters mainly associated with the morphology of the cathode to improve capacity retention. Optimizing the sulfur loading, E/S content, pore structure and pore volume, and the thickness of the cathode lead to an overarching understanding of the physical transitions that occur during the discharge and charge operation of the battery. In addition, various electrochemical testing to evaluation the loss of activity of the cathode surface is also carried it to correlate to the proposed physical model.

Mechanism and Solution of Overcharge Effect in Lithium–Sulfur Batteries

A Novel Strategy for High-Stability Lithium Sulfur Batteries by in Situ Formation of Polysulfide Adsorptive-Blocking Layer

Suppress Loss of Polysulfides in Lithium-Sulfur Battery by Regulating the Rate-Determining Step Via 1T MoS2-MnO2 Covering Layer.

Toward Robust Lithium-Sulfur Batteries Via Advancing Li2S Deposition

Is Overprotection of the Sulfur Cathode Good for Li-S Batteries?

Cathode Nanostructuring and Separator Modification for High-Performance Lithium-Sulfur Batteries

Sulfur crystallization in the cathode of lithium-sulfur battery during the charging process: A possible alternative to reduce the shuttle effect

Strategies toward High-Loading Lithium–Sulfur Batteries

Controlled Nucleation and Growth Process of Li2S2/Li2S in Lithium-Sulfur Batteries

Controlled Nucleation and Growth Process of Li<sub>2</sub>S<sub>2</sub>/Li<sub>2</sub>S in Lithium-Sulfur Batteries

Strategies on Enabling High Areal Sulfur Loading in Lithium Sulfur Batteries

Improving the Performance of Lithium-Sulfur Battery by Blocking Sulfur Diffusing Paths on the Host Materials

Directing electrochemical reaction mechanism via interfacial control for better sulfur cathode

Atomic Interlamellar Ion Path in High Sulfur Content Lithium‐Montmorillonite Host Enables High‐Rate and Stable Lithium–Sulfur Battery

Manipulating Sulfur Mobility Enables Advanced Li-S Batteries

Balancing surface adsorption and diffusion of lithium-polysulfides on nonconductive oxides for lithium–sulfur battery design

Improved Rate Performance of Lithium Sulfur Batteries by In-Situ Anchoring of Lithium Iodide in Carbon/Sulfur Cathode

Sulfonic Groups Originated Dual-Functional Interlayer for High Performance Lithium-Sulfur Battery

Catalytic Effects in Lithium–Sulfur Batteries: Promoted Sulfur Transformation and Reduced Shuttle Effect

Dual-Regulation Strategy to Improve Anchoring and Conversion of Polysulfides in Lithium-Sulfur Batteries.

Genetic engineering of porous sulfur species with molecular target prevents host passivation in lithium sulfur batteries