Abstract:This work proposes a new, efficient, economically, and environmentally viable approach for developing cutting-edge energy systems and assisting the anticipated global green transition with maximal renewable integration. The cogeneration of hydrogen and power is driven by biomass, which in turn drives the vanadium chloride cycle and the proton exchange membrane fuel cells. A cooling absorption unit is powered by waste heat recovered using a passive energy improvement technique to improve performance and cut costs. Energy, exergy, exergo-economic, exergo-environmental impacts, and CO2 emission rate of the suggested renewable-based model are analyzed using an engineering equation solver tool. Parametric analysis is also used to assess the impact of key operational factors on main performance indicators. With machine learning, a particle swarm method is implemented in MATLAB to find the optimal operating state with high precision and low computing cost. The results show the importance of multi-objective optimization by pointing out a conflicting change in the performance metrics from different angles by picking up the biomass moisture content and fuel cell current density. According to the optimization results, an acceptable total cost, environmental damage effectiveness, and exergy efficiency of 5 $/h, 0.86, and 55% are achieved through the integration of particle swarm optimizer and artificial neural network method. The results further reveal that the gasification temperature is not sensitive; however, changing the fuel cell utilization factor significantly impacts the system's performance from all sides. Finally, the chord diagram of the irreversibility rate indicates that the fuel cell and gasifier have the highest destruction of 6.4 kW and 2.6 kW under the optimum condition, owing to mixing and chemical re-actions. As for the environmental aspect, by optimizing the system, the system's CO2 emission are greatly reduced.(c) 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Yield and energy optimization of the continuous catalytic regeneration reforming process based particle swarm optimization

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

Modeling, Simulation and Optimization of a Whole Industrial Catalytic Naphtha Reforming Process on Aspen Plus Platform

Multiobjective Optimization of the Industrial Naphtha Catalytic Reforming Process

Optimization of the Countercurrent Continuous Reforming Process Based on Equation-Oriented Modeling and the SQP Algorithm

Process Optimization for Syngas Production from the Dry Reforming of Methane over 5Ni+3Sr/10Zr+Al Catalyst Using Multiple Response Surface Methodology

Modeling and optimization for the continuous catalytic reforming process based on the hybrid surrogate optimization model

Cleaning Schedule Optimization of Heat Exchanger Networks Using Particle Swarm Optimization

Optimization and analysis of syngas production from methane and CO2 via Taguchi approach, response surface methodology (RSM) and analysis of variance (ANOVA)

Molecular Modeling and Optimization for Catalytic Reforming

Numerical Simulation and Optimization of Methane Steam Reforming to Maximize H2 Production: A Case Study

Simulation of catalytic reforming process based on HYSYS and its application

An Innovative Biomass-Driven Multi-Generation System Equipped with PEM Fuel Cells/vcl Cycle: Throughout Assessment and Optimal Design Via Particle Swarm Algorithm

Research on the Optimization of the Operating Parameters of Methane Carbon Dioxide Reforming Using the Response Surface Methodology

A multiobjective optimization of a catalyst distribution in a methane/steam reforming reactor using a genetic algorithm

Design and optimization of reforming hydrogen production reaction system for automobile fuel cell

Simulation of Sorption-Enhanced Steam Methane Reforming over Ni-Based Catalyst in a Pressurized Dual Fluidized Bed Reactor

Simulative Optimization of Catalyst Configuration for Biogas Dry Reforming

Proposal and ANN-assisted optimization of a hybrid solar- and biomass-based energy system for electricity, freshwater, and hydrogen production

Process Optimization of Catalytic Reforming Based on Differential Evolution and HYSYS Mechanism Model