Abstract:For the present, it is difficult to obtain thermodynamic data for binary liquid alloys by experimental measurements. In this study, the molecular dynamics processes of the binary liquid alloys Pb50-Sn50, Al50-Sn50, and In50-Zn50 were simulated by using the ab initio molecular dynamics (AIMD) principle, and their partial radial distribution functions (PRDF) were obtained at different simulation steps. Combined with the relevant binary parameters of the Molecular Interaction Volume Model (MIVM), Regular Solution Model (RSM), Wilson Model, and Non-Random Two-Liquid (NRTL) models. The integral terms containing the PRDF were computed using the graphical integration method to obtain the parameters of these models, thus estimating their activity and molar excess Gibbs energy. The total average relative deviations (ARD) of the activity and molar excess Gibbs energy estimates of the four models for the binary liquid alloys Pb50-Sn50, Al50-Sn50, and In50-Zn50 at full concentration when the PRDF is obtained by the symmetry method are MIVM: 21.59% and 59.35%; RSM: 21.63% and 60.27%; Wilson: 24.27% and 86.7%; NRTL: 23.9% and 83.24%. When the PRDF is obtained by the asymmetric method: MIVM: 22.86% and 68.08%; RSM: 32.84% and 68.66%; Wilson: 25.14% and 82.75%; NRTL: 24.49% and 85.74%. This indicates that the estimation performance of the MIVM model is superior to the other three models, and the symmetric method performs better than the asymmetric method. The present study also derives and verifies the feasibility of Sommer's equation for estimating the molar excess Gibbs energy and activity of binary liquid alloy systems in the Miedema model by using different equations of enthalpy of mixing versus excess entropy given by Tanaka, Ding, and Sommer. The total ARD of Tanaka, Ding, and Sommer's relational equations in the Miedema model for estimating the activities and molar excess Gibbs energies of the binary liquid alloys Pb-Sn, Al-Sn, and In-Zn are 3.07% and 8.92%, 6.09% and 17.1%, and 4.1% and 14.77%. The results indicate that the estimation performance of the Miedema model is superior to the other four models.

Assessment of Thermophysical Properties of Al-Mg-Si Liquid Alloys.

Thermodynamic, Structural and Surface Properties of Cd-Na Alloys in Liquid State

Calorimetric Studies and Thermodynamic Modeling of Ag–Mg–Ti Liquid Alloys

Estimation of Activity and Molar Excess Gibbs Energy of Binary Liquid Alloys Pb-Sn, Al-Sn and In-Zn from the Partial Radial Distribution Function Simulated by Ab Initio Molecular Dynamics

The use of computational thermodynamics for the determination of surface tension and Gibbs–Thomson coefficient of multicomponent alloys

Thermodynamic Evaluation of the Surface Tension and Viscosity of Liquid Quaternary Alloys: The Ti-Al-Cr-Nb System

A Theoretical and Computational Study of Structure‐Property Relationship in Five Binary Liquid Alloys

Thermophysical properties in the Al-Cu-Ag system: A combined CALPHAD and first-principles study

Calorimetric study of the enthalpy of mixing in the liquid systems Li-Zn and Li-Sn-Zn

Surface Tension Measurement of Metastable Liquid Ti–Al–Nb Alloys

Thermodynamic descriptions of quaternary Mg–Al–Zn–Bi system supported by experiments and their application in descriptions of solidification behavior in Bi-additional AZ casting alloys

Study of Structural Behavior of Cadmium Based Alloys at Molten State

Calorimetric study of the enthalpy of mixing in the liquid systems In-Li and In-Li-Sn

Density, Molar Volume, and Surface Tension of Liquid Al-Ti

Melting, Solidification, and Viscosity Properties of Multicomponent Fe-Cu-Nb-Mo-Si-B Alloys with Low Aluminum Addition

Thermodynamic Properties of the Glass-Forming Ternary (Fe, Co, Ni, Cu)–Ti–Zr Liquid Alloys I. Mixing Enthalpies of Liquid Alloys

Temperature and composition dependence of thermophysical properties within a wide temperature range for ternary Si–Ge–Ag alloys

Constitutive Modeling of High-Temperature Flow Behavior of Al-0.62Mg-0.73Si Aluminum Alloy

Structure-Dynamics Relationship in Al-Mg-Si Liquid Alloys

Interaction of Components in Glass-Forming Melts of Iron and Nickel with Titanium, Zirconium, and Hafnium I. Mixing Enthalpies of Liquid Alloys

Liquid Bi–Pb and Bi–Li alloys: Mining thermodynamic properties from ab-initio molecular dynamics calculations using thermodynamic models