Abstract:This is a study on the tangential flow and advective mixing of viscoplastic fluids (Bingham plastics) between two eccentric, alternately rotating cylinders. Two geometrical configurations and various rotation modes are considered for a relatively large range of the yield stress. The hp-type finite element method with the mixed formulation is used to solve for the steady velocity and pressure fields. The bi-viscosity and the Papanastasiou models agree quantitatively with each other in predicting the velocity fields and the practically unyielded zones. However, the Papanastasiou model is more robust and economic than the bi-viscosity model in the computation using Newton iteration. In the steady flows, in addition to the motionless zones, we have discovered some plugs with rigid rotation, including rotating plugs stuck onto the outer cylinder and rotating, even counter-rotating, plugs disconnected from both cylinders. The unsteady, periodic flow is composed of a sequence of the steady flows, which is valid in the creeping flow regime. The characteristics of advective mixing in these flows have been studied by analysing the asymptotic coverages of a passive tracer, the distributions of the lineal stretching in the flow and the variations of the mean stretching of the flow with time. The tracer coverage is intuitive but qualitative and, occasionally, it depends on the initial location of the tracer. On the other hand, the distribution of stretching is quantitative and more reliable in reflecting the mixing characteristics. Interestingly, the zones of the lowest stretching in the distribution graphs are remarkably well matched with the regular zones in the tracer-coverage graphs. Furthermore, the mixing efficiency proposed by Ottino (1989) is used to characterize the advective mixing in the two geometrical configurations with various rotation modes. It is important to realize that, for plastic fluids, a major barrier to effective mixing is the unyielded fluid plugs which are controlled by the yield stress and geometrical configurations. Therefore, when designing an eccentric helical annular mixer it is important to pay attention first to the geometric issues then to the operating issues.

How Fluid Pseudoplasticity and Elasticity Affect Propeller Flows in Biogas Fermenters

Numerical Investigation of Hydrodynamics and Heat Transfer for Bingham-pseudoplastic Fluids in an Industrial Coiled Stirred Tank

Effects of shear-thinning rheological properties on the energy loss characteristics of a biomass mixing vessel

Optimising flow and mixing in a full-scale gas-mixed anaerobic digester by integrating sludge rheological data using computational fluid dynamics

Simulation Analysis of Power Consumption and Mixing Time of Pseudoplastic Non-Newtonian Fluids with a Propeller Agitator

The 3-D optimization of an axial mixer propeller through high fidelity simulations

Gas–liquid mixing performance of a non‐Newtonian fluid in a multiple‐impeller agitated tank

The Influence of Shear-Thinning Characteristics on Multiphase Pump Vortex Structure Evolution, Pressure Fluctuation, and Gas-Solid Distribution

Numerical Simulation and Models of Gas-stirred Anaerobic Digester by CFD

Multiscale Hydrodynamic Investigation to Intensify the Biogas Production in Upflow Anaerobic Reactors

Numerical simulations of the flow of a kerosene gel: Effects of thixotropy and shear-thinning

Assessing Rheology Effects and Pore Space Complexity in Polymer Flow Through Porous Media: A Pore‐Scale Simulation Study

Effect of Hydrodynamic Shear on Biogas Production and Granule Characteristics in a Continuous Stirred Tank Reactor

Effect of Bubble Morphology and Behavior on Power Consumption in Non-Newtonian Fluids’ Aeration Process

Horizontal Flow Reactor Optimization for Biogas Recovery During High Solid Organics Fermentation: Rheological Characteristic Analyses

Flow and Stress Field Analysis of Different Fluids and Blades for Fermentation Process

Substrate and operational conditions as regulators of fluid properties in full-scale continuous stirred-tank biogas reactors - implications for rheology-driven power requirements

Tangential flow and advective mixing of viscoplastic fluids between eccentric cylinders

A Comparison of Physical and Numerical Modeling of Homogenous Isotropic Propeller Blades

The Influence of Temperature on Rheological Parameters and Energy Efficiency of Digestate in a Fermenter of an Agricultural Biogas Plant

Modeling of gas–liquid mass transfer in a stirred tank bioreactor agitated by a Rushton turbine or a new pitched blade impeller