High-resolution 3D imaging in light-field microscopy through Stokes matrices and data fusion

Wenqi Shi,Hongda Quan,Lingbao Kong

DOI: https://doi.org/10.1364/oe.510728

IF: 3.8

2024-01-20

Optics Express

Abstract:Wenqi Shi, Hongda Quan, Lingbao Kong The trade-off between the lateral and vertical resolution has long posed challenges to the efficient and widespread application of Fourier ... [Opt. Express 32, 3710-3722 (2024)]

optics

What problem does this paper attempt to address?

Isotropic three-dimensional imaging with lattice light-sheet difference microscopy.

Chengfeng Zhang,Yuchen Chen,Wenjie Liu,Cuifang Kuang,Zhimin Zhang,Xiang Hao,Xu Liu

DOI: https://doi.org/10.1364/OL.393378

IF: 3.6

2020-01-01

Optics Letters

Abstract:Through the interference of several beams with the same phase at the rear pupil, an optical lattice is generated and used as the excitation light field in lattice light-sheet microscopy (LLSM). Although, LLSM offers fast imaging ability through the dithered mode, it suffers from poor axial resolution. On the other hand, the structured illumination microscopy (SIM) mode in LLSM provides a high but anisotropic spatial resolution at the price of a lower imaging speed. In this Letter, we propose a new, to the best of our knowledge, type of optical lattice by defining the composed beam vectors with different phases. The lattice light-sheet difference microscopy (LLSDM) proposed in this work utilizes the new optical lattice along with the conventional one by simply changing the pattern loaded on the spatial light modulator. Through simulations with parameters obtained from the real acquisition procedures and the microscope properties, we examine the feasibility of LLSDM, and obtain nearly isotropic spatial resolution and great alleviation of the sidelobes. These characteristics enable LLSDM to broaden the accessible imaging content of light-sheet microscopes and further facilitate their applications in life sciences. (C) 2020 Optical Society of America.
Fluorescence Interference Structured Illumination Microscopy for 3D Morphology Imaging with High Axial Resolution

Yile Sun,Hongfei Zhu,Lu Yin,Hanmeng Wu,Mingxuan Cai,Weiyun Sun,Yueshu Xu,Xinxun Yang,Jiaxiao Han,Wenjie Liu,Yubing Han,Xiang Hao,Renjie Zhou,Cuifang Kuang,Xu Liu

DOI: https://doi.org/10.1117/1.ap.5.5.056007

IF: 13.582

2023-01-01

Advanced Photonics

Abstract:Imaging three-dimensional, subcellular structures with high axial resolution has always been the core purpose of fluorescence microscopy. However, trade-offs exist between axial resolution and other important technical indicators, such as temporal resolution, optical power density, and imaging process complexity. We report a new imaging modality, fluorescence interference structured illumination microscopy（FI-SIM）, which is based on three-dimensional structured illumination microscopy for wide-field lateral imaging and fluorescence interference for axial reconstruction. FI-SIM can acquire images quickly within the order of hundreds of milliseconds and exhibit even 30 nm axial resolution in half the wavelength depth range without z-axis scanning. Moreover, the relatively low laser power density relaxes the requirements for dyes and enables a wide range of applications for observing fixed and live subcellular structures.
In Vivo Light-Field Encoded Nano-Imaging in a Narrow Space

Quanzhi Li,Zhong Wen,Liangliang Huang,Xu Liu,Qing Yang

DOI: https://doi.org/10.1117/12.3009621

2024-01-01

Abstract:Existing super-resolution imaging technology relies on rigid and bulky systems, which limits its application in narrow space. Endoscopy based on multimode fibers (MMF) has emerged as a significant solution for in vivo imaging. There is a high requirement to observe samples inside the lumen of the body simultaneously break through the diffraction limit. We propose the frequency-shift mechanism for universal super-resolution imaging with light-field encoded modulation. In this paper, we demonstrate our method for a single MMF in vivo imaging at subcellular resolution through light-field encoded, which can also ensure stable imaging under various operating conditions.
Three Dimensional Surface Reconstruction Based on Light Field Imaging

Sun Shiyi,Kuang Cuifang,Liu Xu

DOI: https://doi.org/10.5768/jao201738.0202001

2017-01-01

Journal of Applied Optics

Abstract:Traditional imaging methods can not capture axial information through one shot,which lead to information deficiency and incapability of three dimentional surface reconstruction.Unlike traditional camera,lytro's first generation pocket-sized camera using light field sensor can capture multi-dimensional light field information through one single exposure,and at the same time it has advantages such as portable.By using light field camera,with digital refocusing method,defocusing and correspondence cues,acquirement of high quality depth map can be realized.By using matlab platform to process acquired depth map matrix,reconstruction of three dimensional surface can be realized.Normalized depth data of object space is obtained.In this experiment,three dimensional surface reconstruction is realized with average error of 5.47％ in depth range of 100mm to 1 500 mm,and maximum reconstruction error is 8.30&.
Total variation and spatial iteration-based 3D structured illumination microscopy

Mingxuan Cai,Hongfei Zhu,Yile Sun,Lu Yin,Fanghui Xu,Hanmeng Wu,Xiang Hao,Renjie Zhou,Cuifang Kuang,Xu Liu

DOI: https://doi.org/10.1364/OE.451190

IF: 3.8

2022-01-01

Optics Express

Abstract:Three-dimensional structured illumination microscopy (3D-SIM) plays an essential role in biological volumetric imaging with the capabilities of improving lateral and axial resolution. However, the traditional linear 3D algorithm is sensitive to noise and generates artifacts, while the low temporal resolution hinders live-cell imaging. In this paper, we propose a novel 3D-SIM algorithm based on total variation (TV) and fast iterative shrinkage threshold algorithm (FISTA), termed TV-FISTA-SIM. Compared to conventional algorithms, TV-FISTA-SIM achieves higher reconstruction fidelity with the least artifacts, even when the signal-to-noise ratio (STIR) is as low as 5 dB, and a faster reconstruction rate. Through simulation, we have verified that TV-FISTA-SIM can effectively reduce the amount of required data with less deterioration. Moreover, we demonstrate TV-FISTA-SIM for high-quality multi-color 3D super-resolution imaging, which can be potentially applied to live-cell imaging applications. (C) 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement
Three Dimensional Reconstruction Using a Lenslet Light Field Camera

Wentao Zhang,Shengqian Chang,Xiao Tao,Chang Wang,Chenning Tao,Peizheng Huang,Zhenrong Zheng

DOI: https://doi.org/10.1117/12.2319552

2018-01-01

Abstract:A novel method is proposed in this paper to accurately reconstruct the three-dimensional scenes by using a passive single-shot exposure with a lenslet light field camera. This method has better performance of 3D scenes reconstruction with both defocus and disparity depth cues captured by light field camera. First, the light field data is used to refocus and shift viewpoints to get a focal stack and multi-view images. In refocusing procedure, the phase shift theorem in the Fourier domain is first introduced to substitute shift in spatial domain, and sharper focal stacks can be obtained with less blurriness. Thus, 3D scenes can be reconstructed more accurately. Next, through multi-view images, disparity depth cues are obtained by performing correspondence measure. Then, the focal stack is used to compute defocus depth cues by focus measure based on gray variance. Finally, the focus cost is built to integrate both defocus and disparity depth cues, and the accurate depth map is estimated by using Graph Cuts based on the focus cost. Using this accurate depth map and all-in-focus image, the 3D structure in real world are accurately reconstructed. Our method is verified by a number of synthetic and real-world examples captured with a dense camera array and a Lytro light field camera.
High-resolution 3D light-field imaging

Qiang Geng,Zhiqiang Fu,Shih-Chi Chen

DOI: https://doi.org/10.1117/1.jbo.25.10.106502

IF: 3.758

2020-10-12

Journal of Biomedical Optics

Abstract:SIGNIFICANCE: High-speed 3D imaging methods have been playing crucial roles in many biological discoveries.AIM: We present a hybrid light-field imaging system and image processing algorithm that can visualize high-speed biological events.APPROACH: The hybrid light-field imaging system uses the selective plane optical illumination, which simultaneously records a high-resolution 2D image and a low-resolution 4D light-field image. The high-resolution 4D light-field image is obtained by applying the hybrid algorithm derived from the deconvolution and phase retrieval methods.RESULTS: High-resolution 3D imaging at a speed of 100-s volumes per second over an imaging field of 250 × 250 × 80 μm3 in the x, y, and z axis, respectively, is achieved with a 2.5 times enhancement in lateral resolution over the entire imaging field compared with standard light-field systems. In comparison to the deconvolution algorithm, the hybrid algorithm addresses the artifact issue at the focal plane and reduces the computation time by a factor of 4.CONCLUSIONS: The new hybrid light-field imaging method realizes high-resolution and ultrafast 3D imaging with a compact setup and simple algorithm, which may help discover important applications in biophotonics to visualize high-speed biological events.

radiology, nuclear medicine & medical imaging,biochemical research methods,optics
Resolution Enhancement for Light Field Microscopic 3D Imaging Based on Polarization and Data Fusion

Wenqi Shi,Lingbao Kong

DOI: https://doi.org/10.1117/12.2692723

2023-01-01

Abstract:Light field microscopy (LFM) is an emerging three-dimensional (3D) imaging technology that simultaneously captures both spatial and angular information of the incident light by placing a micro lens array (MLA) in front of an imaging sensor, enabling computational reconstruction of the full 3D volume of a specimen via a single camera frame or single shot imaging. Unlike other 3D imaging techniques that acquire spatial information sequentially or through scanning, LFM four-dimensional (4D) imaging scheme effectively frees volume acquisition time from spatial scales and easy to miniaturize, thus making LFM a highly scalable tool in diverse applications. However, its broad application has slowed down due to the low resolution of the limited angular and spatial information in one snapshot of captured image, the inhomogeneous resolution of reconstructed depth images, and the lack of lateral shift invariance, which greatly degrades the spatial resolution, causing grid-like artifacts and great computational complexity. The introduction of Fourier light field microscopy (FLFM) provides a promising path to improve the current LFM techniques and achieve high-quality imaging and rapid light field reconstruction. However, the inherent trade-off between the angular and spatial resolution is still not fundamentally resolved without the introduction of additional information. Polarization, another dimension of light field information, has been shown to integrate well with other 3D imaging techniques to obtain finer 3D reconstructions results. Unfortunately, this aspect has seldom received attention and is ignored in LFM. This paper presents a resolution enhancement scheme for Fourier light field microscopy system that utilizes polarization norms and light field point cloud data fusion to generate improved imaging resolution and 3D reconstruction accuracy. Different from conventional FLFM, this approach actively introduces additional surface polarization information of the sample into the reconstruction of 3D volume information. A universal polarization-integrated FLFM configuration is designed and built up, allowing polarization and light field data to be acquired simultaneously using the same set of optical paths. A mathematical model is derived to describe the mapping and fusion of the polarization norms and light field point cloud data. Simulation studies show that the resolution and accuracy of the 3D reconstruction of the proposed FLFM imaging system are significantly improved after incorporating the polarization information, confirming the validity of the proposed methods. Finally, the implications of this approach for FLM are discussed, providing guidance for future experiments and applications. The resolution enhancement approach based on polarization and data fusion provides a feasible solution to the contradiction between lateral resolution and vertical resolution, and further improve the resolution of the FLFM imaging system.
Light field angular super-resolution based on intrinsic and geometric information.

Lingyu Wang,Lifei Ren,Xiaoyao Wei,Jiangxin Yang,Yanlong Cao,Yanpeng Cao

DOI: https://doi.org/10.1016/j.knosys.2023.110553

2023-01-01

Abstract:Light field imaging can encode abundant scene information, including the intensity and direction of light rays, into 4D light field images. However, the limited number of sensors in commercial light field cameras leads to a trade-off between spatial and angular resolutions. In this paper, an angular super-resolution framework is proposed to synthesize new views and overcome hardware restrictions. First, light field intrinsic feature convolution is proposed to extract intrinsic information, i.e., scene content, complete view correlations, and epipolar structures. Consequently, spatial, angular, and cross-domain information can be preserved in the extracted features. Second, the spatial-angular and depth streams are proposed based on the light field intrinsic feature convolution to synthesize high angular resolution light fields. The spatial-angular stream utilizes the light field intrinsic information to improve the angular resolution, whereas the depth stream disentangles the geometric information from the extracted light field intrinsic features, which is used to warp the given sub-aperture images to the new view positions. Both streams can synthesize high-quality intermediate results, where the intrinsic and geometric information are utilized separately. Finally, a confidence-based stream fusion module is proposed to fuse the outputs from the two streams, achieving the joint employment of light field intrinsic and geometric information and solving the problem of insufficient information exploration in the current methods. We conduct a series of experiments to validate the effectiveness of each component in the framework and demonstrate that our method can achieve state-of-the-art performance in various scenes.(c) 2023 Elsevier B.V. All rights reserved.
Design of a light field microscope with uniform spatial resolution across an extended 3D volume

Qi Zheng,Xin Jin,Yanqin Chen

DOI: https://doi.org/10.1117/12.2601433

2021-01-01

Abstract:Light field microscopy (LFM) can capture the 4D light field for high-speed volumetric imaging with single-shot image by introducing a microlens array in traditional microscopy and combing with Richardson-Lucy deconvolution algorithm, which leads to wide usage in neuroimaging and dynamics observing, etc. However, the spatial resolution of the reconstructed results shows non-uniformity along the axial optical axis due to its varying spatial-angular sampling ratio along axial axis, which limits its application in observing thick samples. In this paper, we propose a new method including light field microscope scanning strategy and a multi-image deconvolution algorithm to address this problem. First, by designing several groups of different distances between the native object plane and microlens array, we can ensure appropriate spatial-angular sampling ratio among a wide range of depth. Secondly, according to the characteristics of camera noise in the process of fluorescence microscopy imaging, we get the loss function by calculating the K-L divergence of the Poisson noise likelihood, then provide an iterative reconstruction deconvolution algorithm. Applying the multi-image deconvolution algorithm to the captured light field images, we can finally get an extended 3D volume with uniform spatial resolution. We validate our approach by using both simulation and real experiments, which contain resolution measurements of a USAF 1951 resolution target and fluorescent beads. Under the same configuration, the proposed method can reduce the variance of the resolution across 200 mu m by 20%, compared with existing method, which demonstrates a more uniform resolution distribution.
Quantum light-field microscopy for volumetric imaging with extreme depth of field

Yingwen Zhang,Duncan England,Antony Orth,Ebrahim Karimi,Benjamin Sussman

DOI: https://doi.org/10.1103/physrevapplied.21.024029

IF: 4.6

2024-02-15

Physical Review Applied

Abstract:Light-field microscopy (LFM) is a three-dimensional microscopy technique whereby volumetric information of a sample is gained by simultaneously capturing both the position and momentum information of light illuminating the sample. Conventional LFM designs generally require a trade-off between position and momentum resolution, requiring one to sacrifice resolving power for increased depth of field (DOF). In this work, we demonstrate a LFM design that does not require this trade-off by utilizing the inherent correlations between spatial-temporal entangled photon pairs. Here, one photon from the pair is used to illuminate a sample from which the position information of the photon is captured directly by a camera. By virtue of the momentum anticorrelation between the two photons, the momentum information of the illumination photon can be inferred by measuring the momentum of its entangled partner. By using a wave-optics approach for the light-field reconstruction, we demonstrate that a resolving power of up to 5μm can be maintained with a DOF of approximately 500μm , approximately 10 times that of a conventional LFM or >100 times that of a bright-field microscope. In the extreme, at a resolving power of 100μm , it is possible to achieve near infinite DOF. https://doi.org/10.1103/PhysRevApplied.21.024029 © 2024 American Physical Society

physics, applied
Light Field Fourier Ptychographic Microscopy

Ming Li,Yicheng Li,Ling Zhong,Ruixin Wen,Cuifang Kuang,Haifeng Li

DOI: https://doi.org/10.1117/12.2522600

2019-01-01

Abstract:In this paper, a novel microscopic imaging technology, termed light field Fourier ptychographic microscopy (LFFPM), is presented which enables the reconstruction of wide-field, high-resolution images with the depth information by utilizing a light-emitting-diode (LED) illumination matrix.Conventional light field microscope lacks the ability of high lateral resolution because it sacrifices its lateral resolution to its angular resolution. Compared to conventional light field microscope, LFFPM enhances the lateral resolution with no need for the object to be in focus. Using LFFPM, the result shows that the lateral resolution is more than 2 times better than light field microscopy in simulation and 1.5 times in the experiment. Furthermore, the simulation result also shows that the ability of LFFPM to recovery the information of the phase and amplitude.Thus, this technology has a wide prospect of various biomedical applications such as neuroanatomy and haematology.
Phase Guided Light Field for Spatial-Depth High Resolution 3D Imaging

Geyou Zhang,Ce Zhu,Kai Liu,Yipeng Liu

2024-04-10

Abstract:On 3D imaging, light field cameras typically are of single shot, and however, they heavily suffer from low spatial resolution and depth accuracy. In this paper, by employing an optical projector to project a group of single high-frequency phase-shifted sinusoid patterns, we propose a phase guided light field algorithm to significantly improve both the spatial and depth resolutions for off-the-shelf light field cameras. First, for correcting the axial aberrations caused by the main lens of our light field camera, we propose a deformed cone model to calibrate our structured light field system. Second, over wrapped phases computed from patterned images, we propose a stereo matching algorithm, i.e. phase guided sum of absolute difference, to robustly obtain the correspondence for each pair of neighbored two lenslets. Finally, by introducing a virtual camera according to the basic geometrical optics of light field imaging, we propose a reorganization strategy to reconstruct 3D point clouds with spatial-depth high resolution. Experimental results show that, compared with the state-of-the-art active light field methods, the proposed reconstructs 3D point clouds with a spatial resolution of 1280$\times$720 with factors 10$\times$ increased, while maintaining the same high depth resolution and needing merely a single group of high-frequency patterns.

Image and Video Processing,Computer Vision and Pattern Recognition
Optical single-pixel volumetric imaging by three-dimensional light-field illumination

Yifan Liu,Panpan Yu,Yijing Wu,Jinghan Zhuang,Ziqiang Wang,Yinmei Li,Puxiang Lai,Jinyang Liang,Lei Gong

DOI: https://doi.org/10.1073/pnas.2304755120

Abstract:Three-dimensional single-pixel imaging (3D SPI) has become an attractive imaging modality for both biomedical research and optical sensing. 3D-SPI techniques generally depend on time-of-flight or stereovision principle to extract depth information from backscattered light. However, existing implementations for these two optical schemes are limited to surface mapping of 3D objects at depth resolutions, at best, at the millimeter level. Here, we report 3D light-field illumination single-pixel microscopy (3D-LFI-SPM) that enables volumetric imaging of microscopic objects with a near-diffraction-limit 3D optical resolution. Aimed at 3D space reconstruction, 3D-LFI-SPM optically samples the 3D Fourier spectrum by combining 3D structured light-field illumination with single-element intensity detection. We build a 3D-LFI-SPM prototype that provides an imaging volume of ∼390 × 390 × 3,800 μm3 and achieves 2.7-μm lateral resolution and better than 37-μm axial resolution. Its capability of 3D visualization of label-free optical absorption contrast is demonstrated by imaging single algal cells in vivo. Our approach opens broad perspectives for 3D SPI with potential applications in various fields, such as biomedical functional imaging.
High-Quality Light Field Microscope Imaging Based on Microlens Arrays

Tongkai Gu,Sitong Yan,Lanlan Wang,Yasheng Chang,Hongzhong Liu

DOI: https://doi.org/10.1109/jmems.2023.3349299

IF: 2.829

2024-01-01

Journal of Microelectromechanical Systems

Abstract:High-quality optical observation through traditional microscopes faces significant challenges due to their low spatial sampling and the limited ability to respond only to the light intensity characteristics of optoelectronic devices. This limitation results in an inability to measure other critical optical information during imaging, such as phase, angle, polarization, and coherence. In response to these challenges, light field microscope (LFM) as a powerful imaging technique is capable of measuring samples with unprecedented depth and detail. LFM overcomes the limitations of conventional microscope methods by capturing both spatial and angular information of light rays. To further demonstrate these capabilities, the LFM based on microlens arrays is constructed here. These arrays are fabricated using advanced techniques such as laser lithography, microimprinting, and self-assembly technology. Using light field imaging, image segmentation methods, and deep learning fusion, the imaging quality is nearly doubled, significantly enhancing the quality of observations. LFM based on microlens arrays offers great promise for improving the quality of imaging observations in the field of microsope. [2023-0167]

engineering, electrical & electronic,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Guided, Fusion-Based, Large Depth-of-field 3D Imaging Using a Focal Stack

Yuhao Xiao,Guijin Wang,Xiaowei Hu,Chenbo Shi,Long Meng,Huazhong Yang

DOI: https://doi.org/10.3390/s19224845

2019-01-01

Abstract:Three dimensional (3D) imaging technology has been widely used for many applications, such as human-computer interactions, making industrial measurements, and dealing with cultural relics. However, existing active methods often require both large apertures of projector and camera to maximize light throughput, resulting in a shallow working volume in which projector and camera are simultaneously in focus. In this paper, we propose a novel method to extend the working range of the structured light 3D imaging system based on the focal stack. Specifically in the case of large depth variation scenes, we first adopted the gray code method for local, 3D shape measurement with multiple focal distance settings. Then we extracted the texture map of each focus position into a focal stack to generate a global coarse depth map. Under the guidance of the global coarse depth map, the high-quality 3D shape measurement of the overall scene was obtained by local, 3D shape-measurement fusion. To validate the method, we developed a prototype system that can perform high-quality measurements in the depth range of 400 mm with a measurement error of 0.08%.
Iteratively Reconstructing 4D Light Fields from Focal Stacks.

Xuanwu Yin,Guijin Wang,Wentao Li,Qingmin Liao

DOI: https://doi.org/10.1364/ao.55.008457

IF: 1.9

2016-01-01

Applied Optics

Abstract:Acquiring and representing the 4D space of rays in the world (the light field) is important for many computer vision and graphics applications. In this paper, we propose an iterative method to acquire the 4D light field from a focal stack. First, a discrete refocusing equation is derived from integral imaging principles. With this equation, a linear projection system is formulated to model the focal stack imaging process. Then we reconstruct the 4D light field from the focal stack through solving the inverse problem with a filtering-based iterative method. The experimental results show that our approach is effective and outperforms state-of-the-art methods in reconstruction accuracy, reduced sampling, and occluded boundaries.
High-resolution volumetric imaging using hybrid image of Fourier light-field microscopy and wide-field microscopy

Wenhao Liu,Shu Jia

DOI: https://doi.org/10.1117/12.2610474

2022-03-02

Abstract:We have developed wFLFM to further enhance the resolution by taking the advantage of both wide-field image and FLFM. We proposed the principle of wFLFM and verified the approach both numerically using simulated rings, and experimentally using phantom samples on the wFLFM system we constructed as a prototype. The principle of wFLFM requires only additional wild-field image at the aperture plane, making it readily compatible with various extended depth of focus wide-field modules, and the validating results showed a 2-3× enhancement in lateral resolution without cost in axial information, thereby advancing wFLFM as a promising high-resolution 3D imaging method.
Single-shot, full characterization of the spatial wavefunction of light fields via Stokes tomography

Bing-Shi Yu,Hai-Jun Wu,Chun-Yu Li,Jia-Qi Jiang,Bo Zhao,Carmelo Rosales-Guzmán,Bao-Sen Shi,Zhi-Han Zhu

2023-10-31

Abstract:Since the diffraction behavior of a light field is fully determined by its spatial wavefunction, i.e., its spatial complex amplitude (SCA), full characterization of spatial wavefunction, plays a vital role in modern optics from both the fundamental and applied aspects. In this work, we present a novel complex-amplitude profiler based on spatial Stokes tomography with the capability to fully determine the SCA of a light field in a single shot with high precision and resolution. The SCA slice observed at any propagation plane provides complete information about the light field, thus allowing us to further retrieve the complete beam structure in 3 dimensions space, as well as the exact modal constitution in terms of spatial degrees of freedom. The principle demonstrated here provides an important advancement for the full characterization of light beams with a broad spectrum of potential applications in various areas of optics, especially for the growing field of structured light.

Optics
Wide-field high-resolution 3D microscopy with Fourier ptychographic diffraction tomography

Chao Zuo,Jiasong Sun,Jiaji Li,Anand Asundi,Qian Chen

DOI: https://doi.org/10.1016/j.optlaseng.2020.106003

2019-05-27

Abstract:We report a computational 3D microscopy technique, termed Fourier ptychographic diffraction tomography (FPDT), that iteratively stitches together numerous variably illuminated, low-resolution images acquired with a low-numerical aperture (NA) objective in 3D Fourier space to create a wide field-of-view (FOV), high-resolution, depth-resolved complex refractive index (RI) image across large volumes. Unlike conventional optical diffraction tomography (ODT) approaches that rely on controlled bright-field illumination, holographic phase measurement, and high-NA objective detection, FPDT employs tomographic RI reconstruction from low-NA intensity-only measurements. In addition, FPDT incorporates high-angle dark-field illuminations beyond the NA of the objective, significantly expanding the accessible object frequency. With FPDT, we present the highest-throughput ODT results with 390nm lateral resolution and 899nm axial resolution across a 10X FOV of 1.77mm2 and a depth of focus of ~20{\mu}m. Billion-voxel 3D tomographic imaging results of biological samples establish FPDT as a powerful non-invasive and label-free tool for high-throughput 3D microscopy applications.

Optics,Biological Physics

High-resolution 3D imaging in light-field microscopy through Stokes matrices and data fusion

Isotropic three-dimensional imaging with lattice light-sheet difference microscopy.

Fluorescence Interference Structured Illumination Microscopy for 3D Morphology Imaging with High Axial Resolution

In Vivo Light-Field Encoded Nano-Imaging in a Narrow Space

Three Dimensional Surface Reconstruction Based on Light Field Imaging

Total variation and spatial iteration-based 3D structured illumination microscopy

Three Dimensional Reconstruction Using a Lenslet Light Field Camera

High-resolution 3D light-field imaging

Resolution Enhancement for Light Field Microscopic 3D Imaging Based on Polarization and Data Fusion

Light field angular super-resolution based on intrinsic and geometric information.

Design of a light field microscope with uniform spatial resolution across an extended 3D volume

Quantum light-field microscopy for volumetric imaging with extreme depth of field

Light Field Fourier Ptychographic Microscopy

Phase Guided Light Field for Spatial-Depth High Resolution 3D Imaging

Optical single-pixel volumetric imaging by three-dimensional light-field illumination

High-Quality Light Field Microscope Imaging Based on Microlens Arrays

Guided, Fusion-Based, Large Depth-of-field 3D Imaging Using a Focal Stack

Iteratively Reconstructing 4D Light Fields from Focal Stacks.

High-resolution volumetric imaging using hybrid image of Fourier light-field microscopy and wide-field microscopy

Single-shot, full characterization of the spatial wavefunction of light fields via Stokes tomography

Wide-field high-resolution 3D microscopy with Fourier ptychographic diffraction tomography