Abstract:Magnetic adaptive testing (MAT), thanks to its relative simplicity from the point of view of both hardware and software, appears to be very promising for non-destructive analysis of various ferromagnetic constructional materials used in many industrial applications. In order to make the inspection of tested objects faster, even more straightforward and the processing of data easier, we concentrated our effort both to improve the experimental procedure, based on specific way of the measurement of magnetization curves at piece-wise linear (triangular) exciting field with a constant field rate of change (i.e., slope) as well as to create a universal software tool for MAT data analysis. On contrary to the original implementation of MAT, the hysteresis loops are measured with decreasing maximum field values, starting at sample saturation region; therefore, time consuming sample demagnetization can be skipped completely. In addition, an advanced tool for the processing of experimentally obtained magnetization curves is presented. Using this application allows to find proper non-traditional magnetic parameters (e.g., the differential permeability) being the most sensitive to various types of industrial load (e.g., thermal, mechanical and/or neutron irradiation) and, at the same time, sufficiently correlated with other, traditional magnetic as well as non-magnetic parameters used routinely for the assessment of possible structural changes associated with applied, often long-term, load even on a microscopic scale, prior to any damage manifests on a macroscopic, visible level. The software capabilities were demonstrated on the data representing the material, whose response to acting thermal load is being difficult to analyze, since the dependence of observed parameters (differential permeability) upon defined artificial ageing was rather complicated. Nevertheless, the sensitivity of differential permeability to such a load was found being more than 8 times larger than in case of traditional hysteretic parameter, namely the remanent flux density while the correlation between them was high.

Magnetic characterisation of steel strips using transient field measurements: global sensitivity analysis and regression from a machine-learning perspective

Predicting Mechanical Properties of Cold-Rolled Steel Strips Using Micro-Magnetic NDT Technologies

A New Approach to Measure Fundamental Microstructural Influences on the Magnetic Properties of Electrical Steel using a Miniaturized Single Sheet Tester

Characterization of Magnetic Field in Crack Propagation Stage and Application to Non-Destructive Evaluation

Application of Electromagnetism Method to Characterize the Degradation Behavior in Structural Mild Steel Within the Elastic Range

A regressor-based hysteresis formulation for the magnetic characterisation of low carbon steels

Linearizing Anhysteretic Magnetization Curves: A Novel Algorithm for Finding Simulation Parameters and Magnetic Moments

Inverse Scheme to Locally Determine Nonlinear Magnetic Material Properties: Numerical Case Study

Extracting local switching fields in permanent magnets using machine learning

Magnetic anisotropy quantification in steel fiber reinforced materials

Investigation of Stress Concentration and Microdefect Identification in Ferromagnetic Materials within a Geomagnetic Field

A numerical simulation method of residual magnetic field signals for evaluating deformation-induced stress concentration in ferromagnetic materials

A method to study the influence of background magnetic field on magnetic cores: Measurement, parameter identification and discussion

Nondestructive material characterization and component identification in sheet metal processing with electromagnetic methods

Modeling of Scalar Dependencies of Soft Magnetic Material Magnetization for Electrical Machine Finite-Element Simulation

A Modification of Magnetic Adaptive Testing: Progressive Method for Nondestructive Inspection of Microstructural Changes in Ferromagnetic Constructional Materials

Method of measuring the mechanical properties of ferromagnetic materials based on magnetostrictive EMAT characteristic parameters

Revisiting the universality law in magnetically detected residual stresses in steels

Detection and Characterisation of Conductive Objects Using Electromagnetic Induction and a Fluxgate Magnetometer

Machine learning based classification of vector field configurations

Multi-channel non-destructive testing of steel strip stress based on magneto-elastic effect