Abstract:Publication date: 4 March 2021 Source: Materials Science Forum Vol. 1023 Author(s): Berenice Zúñiga-Torres, Ramiro Correa-Jaramillo, Francisco Hernández-Olivares, Francisco Fernandez-Martinez, Alonso Zúñiga-Suárez, Israel Briceño-Tacuri, Lenin Loaiza-Jiménez The construction industry has focused on trying to minimize and control the environmental impacts caused within the process of production and manufacture of fired bricks, for this reason the present research proposes five different alternative mixtures for the elaboration of ecological bricks, four of these based on soil-cement and one obtained through a geopolymerization process, using raw materials from the amazon region and the southern highlands of Ecuador, such as soil from the Centza mine (MC), sand from the Quiringue mine (MQ), organic correctors of husk rice (RH ), peanut shell (PS), natural gypsum (G) from the Malacatos sector and fired brick residues from the same sector. The raw materials were characterized (analysis: physicochemical and mineralogical); the soil-cement-based combinations used different percentages of substitution of organic correctors and gypsum, the optimum percentage of water and cement was determined through the compaction test and resistance to simple compression respectively, the samples were cured and tested at ages of 7, 14 and 28 days. In the geopolymerization process, an alkaline solution NaOH was used in different concentrations of molarity and solution contents, the specimens were cured at temperatures of 90 °C, 120 °C, 150 °C, 180 °C and 200 °C. The different combinations were subjected to indirect traction with the purpose to determine the optimal mixture and subsequent estimation of the compressive strength of bricks applying the Griffith criterion, the results were validated by the finite element method, obtaining strengths of 4 MPa in the combination soil-cement sand (SC_Ar1), in soil-cement rice husk (SC_RH2) and soil-cement peanut shell (SC_PS2) mixtures its resistance is 3 MPa, while in the soil-cement gypsum (SC_G4) mixture the resistance is 6.90 MPa and finally the resistance in geopolymeric mixture (GBW) is 13.75 MPa; In this way, the optimal combinations comply and increase the resistance to simple compression of bricks by 35% the SC_Ar1 mixture, 130% in the SC_G mixture with respect to the spanish standard and 129% the GBW mixture with respect to the ecuadorian standard.

Experimental Characterization of Flexural Strength and Water Absorption Properties of Mud-Bricks Manufactured Under Prehispanic Technique and the Addition of Asphalt Additives

Mortar with Natural Light-Weight Expanded Vermiculite Aggregate: Physical and Mechanical Properties

Experimental Study on Mechanical Properties of Basalt Fiber-Clay Lime Mortar and Application in Brick Masonry

Biological Solutions for the Remediation of Cracks in Ancient Earthen Structures: Experimental Studies

Innovative Materials for Sustainable Construction

Rammed earth sustainability and durability in seismic areas as a building material

Effect of Porosity/Binder Index on Strength, Stiffness and Microstructure of Cemented Clay: The Impact of Sustainable Development Geomaterials

Investigation of the pore structure performance of cementitious dune sand mortar manufacturing with crushed ceramic waste

Investigation of the properties and behaviour of ancient and newly constructed mudbricks from the ancient walls of Eleusis

Mechanical behavior, petrography and microstructural analysis of mining waste recycled bricks

Effect of Cow Dung Additions on Tropical and Mediterranean Earth Mortars-Mechanical Performance and Water Resistance

Effect of the Addition of Agribusiness and Industrial Wastes as a Partial Substitution of Portland Cement for the Carbonation of Mortars

Characterization of cement mortars with regional organic and inorganic additives

Influence of Materials of Moulds and Geometry of Specimens on Mechanical Properties of Grouts Based on Ultrafine Hydraulic Binder

Evolution of Durability and Mechanical Behaviour of Mud Mortar Stabilized with Oil Shale Ash, Lime, and Cement

Analysis of Novel Porosity–Water-to-Binder Index for Prediction of Strength, Stiffness and Durability for Cemented Soils

An Experimental Investigation of Mechanical Properties in Clay Brick Masonry by Partial Replacement of Fine Aggregate with Clay Brick Waste

Evaluation of Compressive and Bending Strength of a Geopolymer Based on Lateritic Clays as an Alternative Hydraulic Binder

Mechanical Behavior of Masonry Mortars Reinforced with Disposable Face Mask Strips

Preliminary Report on Engineering Properties and Environmental Resistance of Ancient Mud Bricks from Tell El-Retaba Archaeological Site in the Nile Delta

Rheological, mechanical and durability properties of mortar containing brick waste as a partial replacement of sand