Abstract:A new strategy to reduce the operating temperature of the solid oxide fuel cell (SOFC) is needed to foster the progress of developing high-performance and stable SOFC as a solution to the thermal stress and degradation of the cell components induced by high-temperature SOFC. The use of lithium (Li) as a cathode can increase the cell's efficiency, as it allows for faster ion transport and a higher reaction rate. This study presents an attractive approach to using a Li-based cathode by combining Li with cobalt (Co) to form LiCo0.6Sr0.4O2 (LCSO). In this work, a precursor consisting of Li, Co, and strontium (Sr) was prepared via the glycine-nitrate combustion method. The precursor was calcined at two different calcination temperatures (800 and 900 °C) prior to ink formulation and symmetrical cell fabrication in order to study the effect of calcination temperature on the structural and electrochemical behaviour of a Li-based cathode. The precursor LCSO powder was characterised using X-ray crystallography (XRD) to determine the crystal structure and composition of the developed LCSO. The electrochemical performance of the fabricated symmetrical cell was tested using electrochemical impedance spectroscopy (EIS) to obtain the cell's resistance information, which is related to the cell's ionic and electronic conductivity. SDC electrolyte with LCSO calcined at 800 °C has a higher crystallinity percentage and a more porous structure compared to LCSO calcined at 900 °C. The porous structure enhanced the electrochemical performance of the cell, where the symmetrical cell has the highest conductivity (0.038 Scm−1) with the lowest activation energy (0.43 eV). The symmetrical cell was also able to achieve 2.89 Ω cm2 of area-specific resistance (ASR) at 800 °C of operating temperature. In conclusion, the SDC electrolyte with LCSO calcined at 800 °C is the promising cathode material for SOFC applications. The result of this study can benefit the SOFC field of research, especially in the development of intermediate temperature-SOFC.

Effects of roller speed on the structural and electrochemical properties of LiCo0.6Sr0.4O2 cathode for solid oxide fuel cell application

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

A Review on the Process-Structure-Performance of Lanthanum Strontium Cobalt Ferrite Oxide for Solid Oxide Fuel Cells Cathodes

Effect of Calcination Temperature on the Structural and Electrochemical Behaviour of Li-Based Cathode for Intermediate-Temperature SOFC Application

Preparation, Structure and Performance of La0.6Sr0.4Co0.2Fe0.8O3 Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Modeling of Solid Oxide Fuel Cell (SOFC) Electrodes from Fabrication to Operation: Correlations Between Microstructures and Electrochemical Performances

Enhanced oxygen reduction reaction of LaSrCoO4–Ce0.9Mn0.1O2 composite cathode for solid oxide fuel cells

The physical properties and effects of sintering conditions on rSOFC fuel electrodes evaluated by molecular dynamics simulation

Conducting Property and Performance Evaluation of LNF As Cathode Current Contact Layer in Solid Oxide Fuel Cell

Understanding the Effect of Dispersant Rheology and Binder Decomposition on 3D Printing of a Solid Oxide Fuel Cell

Influence of CO2 on the Cathode Performance and Stability of La1-XSrxCo0.2Fe0.8O3-Î´ in Solid Oxide Fuel Cells

High-Performanced Cathode with A Two-Layered R-P Structure for Intermediate Temperature Solid Oxide Fuel Cells

Enhanced Performance of La<sub>0.8</sub>Sr<sub>0.2</sub>FeO<sub>3-</sub>-Gd<sub>0.2</sub>Ce<sub >0.8</sub>O<sub>2-</sub> Cathode for Solid Oxide Fuel Cells by Surface Modification with BaCO<sub>3</sub> Nanoparticles

Effect of Deposition Temperature on the Microstructure and Performance of Vacuum Cold Sprayed Nano-structured LSCF Cathodes for Solid Oxide Fuel Cells

Mechanical Properties of La0.6Sr0.4Co0.2Fe0.8O3-d Fuel Cell Electrodes

Electrochemical Characteristics of Solid Oxide Fuel Cell Cathodes Prepared by Infiltrating (la,sr)mno3 Nanoparticles into Yttria-Stabilized Bismuth Oxide Backbones

Characterization of Symmetrical SrFe0.75Mo0.25O3−δ Electrodes in Direct Carbon Solid Oxide Fuel Cells

Enhanced electrochemical redox kinetics of La0.6Sr0.4Co0.2Fe0.8O3 in reversible solid oxide cells

Highly Active and Robust La0.8sr0.2co0.2fe0.8o3-Δ Fiber Based Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Effect of processing route on the properties of LSCF-based composite cathode for IT-SOFC

Preparation and Electrochemical Performance of (La,sr)(co,fe)o3-Δ Cathode for Solid Oxide Fuel Cells