Abstract:Conducting high-temperature tests on ceramics-containing lithium, which are employed as tritium breeding materials, plays a crucial role in comprehending their ability to withstand degradation and maintain their strength properties throughout operation. From the standpoint of fusion research, it is imperative to grasp these phenomena in order to guarantee the safety and effectiveness of reactors. Additionally, these factors could impact the choice of particular materials and designs for blanket materials. The primary objective of this research is to evaluate alterations in the strength characteristics of ceramics-containing lithium when subjected to high-temperature thermal stability tests, while also preserving the hardness stability and resistance to cracking in ceramics subjected to cyclic tests. Lithium-containing ceramics based on lithium titanate (Li2TiO3), lithium orthosilicate (Li4SiO4), and lithium methacyrconate (Li2ZrO3), having a high structural ordering degree and good strength properties, were chosen as objects for assessing resistance to high-temperature degradation. During the studies, it was discovered that the presence of interphase boundaries in the composition of ceramics linked to the development of impurity phases results in crack resistance growth during long-term high-temperature tests simulating the stress effect on the material. At the same time, an assessment of high-temperature aging as a result of modeling destruction processes showed that ceramics based on lithium metazirconate are the most resistant to degradation of strength properties. By simulating high-temperature aging processes, it became feasible to establish connections between structural alterations resulting from the thermal expansion of the crystal lattice and oxygen migration phenomena occurring at elevated temperatures. These factors collectively contribute to a detrimental reduction in the strength properties of ceramics-containing lithium.

Long-time corrosion behavior of ceramic candidates for tritium permeation barriers exposed to flowing lead lithium

Preparation technologies and performance studies of tritium permeation barriers for future nuclear fusion reactors

Corrosion Experiments of the Candidate Materials for Liquid Lithium Lead Blanket of Fusion Reactor

Chemical compatibility between the α-Al2O3 tritium permeation barrier and Li4SiO4 tritium breeder

A Study on the Radiation Resistance Performance of an Al2O3 Composite Tritium Permeation Barrier and Zirconium-Based Tritium-Absorbing Materials

Tritium Permeation Barrier-Aluminized Coating Prepared by Al-Plating and Subsequent Oxidation Process

A new preparing method and performances of FeAl/Al2O3 tritium permeation barrier

Design, Optimization And Performance Testing Of Self-Healing Tritium Permeation Barriers

Preparation and Properties of Al2O3/SiO2 Composite Tritium Permeation Barrier and Its Effects on the Inner Walls of Pipelines

The Influence of High-Temperature Tests on the Resistance to Degradation and Reduction in Strength Properties of Lithium-Containing Ceramics Used as Blanket Materials for Tritium Breeding

Preparation of CMAS, LZS glass-ceramics and study of the glass ceramics anti-corrosion properties in liquid leadbismuth eutectic at 500°C

Sol–gel prepared Al2O3 coatings for the application as tritium permeation barrier

Optimization of alumina tritium permeation barrier with consideration of the thickness and the surface coverage

Study of Corrosion Resistance and Degradation Mechanisms in LiTiO2-Li2TiO3 Ceramic

Fabricating Tritium Permeation Barrier for PFC with a New Non-Coating Strategy

Deuterium permeability and diffusivity in FeCrAl alloys for LWR cladding application

Tritium-permeation-barrier Properties of Erbium Oxide (TPB) Coating on CLAM Steel

An Al 2 O 3 /Ni–Al tritium permeation barrier coating for the potential application in thorium-based molten salt reactor

Preparation and Characterization of SiO<sub>2</sub>/-Al<sub>2</sub>O<sub>3</sub> Tritium Permeation Barriers at Low Temperature

Mixed hydrogen isotopes plasma-driven permeation through CLF-1 RAFM steel for ITER HCCB TBM

Preliminary Experiments on the Corrosion of CLAM Steel in Flowing Eutectic LiPb