Abstract:With the increasing number of waste tires, rubberized concrete, as a sustainable building material, has garnered widespread attention for its performance and environmental benefits. This study utilized KH-570 modified rubber particles to replace ordinary sand in the preparation of concrete, assessing the workability, shrinkage performance, and axial compression characteristics of rubberized concrete, and establishing a stress-strain constitutive model. The research indicates that the introduction of rubber particles enhances the irregularity and roughness of particles within the concrete matrix, leading to increased inter-particle friction and a reduction in workability. Pre-treatment with KH-570 effectively improves workability, particularly when the rubber content is 15%. Rubberized concrete exhibits higher ductility and slower crack propagation rates, with a decrease in elastic modulus and peak stress as rubber content increases, indicating an enhancement in the deformability and toughness of the concrete. The KH-570 pre-treatment partially counteracts this trend and significantly improves the energy absorption capacity of the concrete. The addition of unmodified rubber particles leads to an increased shrinkage rate in concrete, while the surface pre-treatment with KH-570 enhances the adhesion of rubber to the cementitious matrix, mitigating concrete shrinkage. The proposed axial stress-strain constitutive model for rubberized concrete accurately predicts the mechanical characteristics during the transition from elastic to plastic behavior. Rubberized concrete significantly reduces carbon dioxide emissions per unit volume, especially in untreated rubberized concrete, and offers better cost-effectiveness. In the construction of airport patrol roads, rubberized concrete demonstrates excellent durability and lower maintenance costs. In summary, rubberized concrete not only improves the ductility and toughness of concrete but also offers significant environmental and economic benefits, making it a promising sustainable building material.

Reuse of unburned carbon as filler substitutes in some rubber goods

Performance of Full-Component Coal Gasification Fine Slag: High-Value Utilization as Reinforcing Material in Styrene-Butadiene Rubber (ESBR) for Replacing Carbon Black

Recycling of Flexible Polyurethane Foams by Regrinding Scraps into Powder to Replace Polyol for Re-Foaming

Waste rubber-modified sulfur-fly ash-sand composites as low CO 2 -emission cements

Synthesis of cemented paste backfill by reutilizing multiple industrial waste residues and ultrafine tailings: Strength, microstructure, and GA-GPR prediction modeling

Turning lignin into treasure: An innovative filler comparable to commercial carbon black for the green development of the rubber industry

High-Value and Environmentally Friendly Recycling Method for Coal-Based Solid Waste Based on Polyurethane Composite Materials

Upcycling of textile and footwear wastes for synergistical reinforcement of cement mortar

Mesoporous Spherical Silica Filler Prepared from Coal Gasification Fine Slag for Styrene Butadiene Rubber Reinforcement and Promoting Vulcanization

Effect of Public Fillers on Cement-Stabilized Recycled Mixes of Road Performance: Mechanical Properties, Microstructure, and Durability

Mechanochemical Recycling of Flexible Polyurethane Foam Scraps for Quantitative Replacement of Polyol Using Wedge-Block-Reinforced Extruder

Effects of Carbon Black Surface Modification on the Morphology and Properties in Blends with Natural Rubber Studied with High‐Resolution X‐Ray Computed Tomography

High‐value application of glass beads/porous carbon obtained from coal gasification fine slag as alternative for carbon black in natural rubber composite

Circulation Fluidized Bed Combustion Fly Ash as Partial Replacement of Fine Aggregates in Roller Compacted Concrete

Natural rubber composites reinforced with sodium sulfate waste from pigment industry: A circular economy approach for solid waste management

A novel approach of reapplication of carbon black recovered from waste tyre pyrolysis to rubber composites

Treatment of Coal Fly Ash And Its Environmentally Friendly Use In Rubber And Plastic Industry

Advanced Coal Fly Ash Modification by Using Corrosive Microorganisms As Alternative Filler-Reinforcing Fluororubbers

Utilization of discarded bauxite tailings into eco-friendly foamed mixture lightweight soil

High temperature and fire properties of sustainable syntactic foam reinforced by end‐of‐life tyre‐derived rubber particles

Performance analysis and engineering application of waste rubber crumbs in concrete