Abstract:The global trend toward decarbonization is inspiring researchers to search for low or even zero carbon fuels for internal combustion engines. Ammonia (NH3) is considered a potential alternative fuel to conventional gasoline and diesel without carbon emissions. Although it is not an ideal fuel for use in engines due to its poor combustion properties, the use of hydrogen (H-2), which has low ignition energy and can be decomposed from ammonia, as a combustion promoter can enhance its suitability for engine applications. A careful literature review indicates that the relatively few existing studies on NH3/H-2 engines and the uncertainty of the NH3/H-2 chemistry under typical high-temperature and high-pressure engine environments limit the determination of the ammonia-tohydrogen ratio. However, this question is important when converting an existing engine to ammonia operation because it is related to compression ratio determination, aftertreatment design, ECU mapping, and on-board hydrogen production rate requirements. In other words, this outstanding question would affect the simultaneous design of other accessory systems and the development of ammonia engines. To increase the knowledge of the hydrogen concentration in the fuel feed of ammonia fueled engines in the engine community, this study discusses this question from the perspective of laminar flame speed (LFS), because it is closely related to reactivity, diffusivity, and exothermicity, which is a macroscopic parameter of premixed combustion and directly affects the efficiency and emissions of spark ignition engines. Specifically, the required proportion of hydrogen blended with ammonia is determined by comparing the NH3/H-2 reaction time scale with the millisecond combustion time scale in typical engines. The results show that high temperature enhances the LFS of ammonia, hydrogen and their mixtures, while pressure has an inhibitory effect. In addition, increasing the compression ratio and avoiding fuel-lean operation are effective ways to improve the performance of ammonia combustion with less hydrogen. Considering the high required hydrogen consumption rate and the full load conditions that guarantee high combustion efficiency, off-road application may be a suitable scenario for ammonia-hydrogen engines. Before applying ammonia to automobiles, the technology for onboard hydrogen production should be effectively developed.

Theoretical investigation of hydrogen-rich fuel production through ammonia decomposition

Numerical Investigation of a Heavy Duty Compression Ignition Engine Converted to Ammonia Spark Ignition Operation

Thermal Ammonia Decomposition for Hydrogen‐Rich Fuel Production and the Role of Waste Heat Recovery

Hydrogen Enriched Ammonia Engines: Assessment of Hydrogen Concentration in the Fuel Feed from the Laminar Flame Speed Viewpoint

Hydrogen Production Via Ammonia from Methane Integrated with Enhanced Oil Recovery: A Techno-Economic Analysis

Hydrogen Production from Ammonia-Rich Combustion for Fuel Reforming under High Temperature and High Pressure Conditions

In-cylinder thermochemical fuel reforming for high efficiency in ammonia spark-ignited engines through hydrogen generation from fuel-rich operations

Ammonia decomposition in a porous catalytic reactor to enable hydrogen storage: Numerical simulation, machine learning, and response surface methodology

Numerical Simulation of Effective Heat Recapture Ammonia Pyrolysis System for Hydrogen Energy

Thermocatalytic Ammonia Decomposition – Status and Current Research Demands for a Carbon‐Free Hydrogen Fuel Technology

A Hydrogen Production System Based on Ammonia Combustion Heat: Graded Decomposition and Parameter Analysis

Experimental method of ammonia decomposition study based on thermal-hydraulic approach

Advancements in Thermocatalytic Ammonia Decomposition for Hydrogen Production

Techno-economic and environmental assessment of hydrogen production through ammonia decomposition

Hydrogen Generation via Ammonia Decomposition on Highly Efficient and Stable Ru-free Catalysts: Approaching Complete Conversion at 450 oC

Ammonia for hydrogen storage; A review of catalytic ammonia decomposition and hydrogen separation and purification

Ammonia Decomposition Coupled with Methane Combustion in Catalytic Microreactors for Hydrogen Production

Detailed kinetic analysis of synthetic fuels containing ammonia

Investigation of ammonia and hydrogen as CO2-free fuels for heavy duty engines using a high pressure dual fuel combustion process

Computational Investigation of the Influence of Combustion Chamber Characteristics on a Heavy-Duty Ammonia Diesel Dual Fuel Engine

Experimental Investigations and Numerical Simulation of Thermo-Catalytic Reforming Ammonia for Hydrogen Production