Enhanced ammonia-cracking process via induction heating for green hydrogen: A comprehensive energy, exergy, economic, and environmental (4E) analysis

Seunggwan Yun,Junhyeok Im,Junhwan Kim,Hyungtae Cho,Jaewon Lee
DOI: https://doi.org/10.1016/j.cej.2024.151875
IF: 15.1
2024-05-11
Chemical Engineering Journal
Abstract:Ammonia (NH 3 ) is gaining attention as a hydrogen carrier due to its high H 2 storage capacity and ease of liquefaction at ambient temperatures. The conventional method of ammonia decomposition is thermal cracking through fossil fuel combustion, resulting in significant carbon dioxide (CO 2 ) emissions. Therefore, developing an eco-friendly and highly efficient ammonia decomposition process is important. This study proposed four high-efficiency processes without carbon emissions by improving the induction-heating-based ammonia decomposition process designed in a previous study. The four proposed processes were designed to utilize the H 2 discarded as off-gas of the PSA unit in the existing induction-heating-based ammonia decomposition process. The proposed processes incorporate various unit components, including a proton exchange membrane fuel cell (PEMFC), solid oxide fuel cell (SOFC), burner, and palladium (Pd) membrane. These units were integrated with the PSA outlet to achieve enhanced thermodynamic efficiency compared with the conventional process without carbon emissions. Energy, exergy, economic, and environmental analyses were conducted to assess the feasibility of each case. Thermodynamic analysis revealed that integrating the Pd membrane yields the highest thermal (78.29 %) and exergy (64.02 %) efficiencies. Integrating a PEMFC exhibits the lowest levelized cost of H 2 (6.93 USD/kg H 2 ). Finally, When the four proposed processes are operated with renewable energy, clean hydrogen can be produced at 2.45 to 3.21 kgCO 2 /kgH 2 emission levels. The enhanced processes presented in this study can serve as a blueprint for achieving carbon-free green H 2 production at on-site H 2 refueling stations.
engineering, chemical, environmental
What problem does this paper attempt to address?