Abstract:The electrolysis of CO2 into value-added products holds great potential for closing the carbon cycle. A membrane electrode assembly (MEA) that uses solid polymer electrolytes is a critical technology for enhancing the energy efficiency for the CO2 reduction reaction (CO2RR) because a thin electrolyte layer can effectively reduce the ohmic resistance. The stable operation of the CO2RR in MEA-based cells with an anion-exchange membrane (AEM), however, is hindered by the accumulation of bicarbonate salts, which are derived from alkali-metal cations in anolytes, on the cathode side. Therefore, for stable operation of CO2 electrolysis using an MEA-based cell, the amount of alkali-metal cations needs to be reduced. However, the minimal amount of alkali-metal cations required to operate the reaction system has not been elucidated. Quantitative analysis of the amount of alkali-metal cations transported from the anode to the cathode is essential to obtain the insight into the necessary amount for the operation. In this study, we conducted a quantitative evaluation of the correlation between the production of high-value C2+ compounds, such as ethylene and ethanol, and the transported alkali-metal cations. As a result, although the presence of transported alkali-metal cations on the cathode surface significantly contributes to the generation of C2+ compounds, the rate of K+ ion transport did not match the selectivity of C2+. This result suggests a continuous supply of high amount of K+ to the cathode surface is not required for C2+ formation. On the basis of these findings, we achieved a faradaic efficiency (FE) and a partial current density for C2+ of 77% and 230 mA cm−2, respectively, even after switching the anode solution from 0.1 M KHCO3 to a dilute K+ solution (<7 mM) in an MEA-based cell using AEM and Cu nanoparticles as the cathode catalyst. These values of FE and partial current density were almost identical to those when 0.1 M KHCO3 was continuously supplied as the anode solution. Based on this insight, we successfully improved the durability of the system against salt precipitation. The FE for ethylene remained constant for as long as 60 h at 150 mA cm−2 when continuously flowing 0.1 M KHCO3 as anolyte. However, the FE suddenly decreased after 60 h due to the cessation of CO2 gas flow, caused by salt precipitation in the cathode flow channel. On the contrary, by intermittently supplying 0.1 M KHCO3, we confirmed that the amount of visible K+ salt in the cathode flow field remained negligible even after more than 90 hours of stable operation.

A Solid-State Electrolyte Facilitates Acidic CO 2 Electrolysis without Alkali Metal Cations by Regulating Proton Transport

A Solid-State Electrolyte Facilitates Acidic CO2 Electrolysis without Alkali Metal Cations by Regulating Proton Transport

Confinement of an Alkaline Environment for Electrocatalytic CO2 Reduction in Acidic Electrolytes.

A microchanneled solid electrolyte for carbon-efficient CO2 electrolysis

The Electrode/Electrolyte Interface Study during the Electrochemical CO2 Reduction in Acidic Electrolytes

Efficient and stable acidic CO2 electrolysis to formic acid by a reservoir structure design

Quantitative Understanding of Cation Effects on the Electrochemical Reduction of CO2 and H+ in Acidic Solution

Stabilizing *CO2 Intermediates at the Acidic Interface using Molecularly Dispersed Cobalt Phthalocyanine as Catalysts for CO2 Reduction

Quantitative Understanding of Cation Effects on the Electrochemical Reduction of CO 2 and H + in Acidic Solution

Acidic conditions for efficient carbon dioxide electroreduction in flow and MEA cells

Durable CO2 conversion in the proton-exchange membrane system

Strategies for efficient CO2 electroreduction in acidic conditions

Quantitative Analysis and Manipulation of Alkali Metal Cations at the Cathode Surface in Membrane Electrode Assembly Electrolyzers for CO2 Reduction Reactions

Immobilized Tetraalkylammonium Cations Enable Metal‐free CO2 Electroreduction in Acid and Pure Water

Electrocatalytic CO2 reduction in acidic medium

Electrochemical CO2 Reduction to High-Concentration Pure Formic Acid Solutions in an All-Solid-state Reactor

Suppression of Salt Precipitation in Membrane Electrode Assembly Electrolyzers for CO2 reduction reactions by Intermittent Supply of Alkali Metal Cations

Surface-immobilized cross-linked cationic polyelectrolyte enables CO2 reduction with metal cation-free acidic electrolyte

Application of solid electrolytes in electrochemical reduction of CO2 or O2

Anolyte Enhances Catalyst Utilization and Ion Transport Inside a CO2 Electrolyzer Cathode

Modulating electric field distribution by alkali cations for CO2 electroreduction in strongly acidic medium