Abstract:The present study is focused on the development of a material model where the orthotropic-visco-elastic and orthotropic-visco-plastic mechanical behavior of a polymeric material is considered. The increasing need to reduce the climate-damaging exhaust gases in the automotive industry leads to an increasing usage of electric powered drive systems using Lithium-ion (Li-ion) batteries. For the safety and crashworthiness investigations, a deeper understanding of the mechanical behavior under high and dynamic loads is needed. In order to prevent internal short circuits and thermal runaways within a Li-ion battery, the separator plays a crucial role. Based on results of material tests, a novel material model for finite element analysis (FEA) is developed using the explicit solver Altair Radioss. Based on this model, the visco-elastic-orthotropic, as well as the visco-plastic-orthotropic, behavior until failure can be modeled. Finally, a FE simulation model of the separator material is performed, using the results of different tensile tests conducted at three different velocities, 0.1 mm·s−1, 1.0 mm·s−1 and 10.0 mm·s−1 and different orientations of the specimen. The purpose is to predict the anisotropic, rate-dependent stiffness behavior of separator materials in order to improve FE simulations of the mechanical behavior of batteries and therefore reduce the development time of electrically powered vehicles and consumer goods. The present novel material model in combination with a well-suited failure criterion, which considers the different states of stress and anisotropic-visco-dependent failure limits, can be applied for crashworthiness FE analysis. The model succeeded in predicting anisotropic, visco-elastic orthotropic and visco-plastic orthotropic stiffness behavior up to failure.

Evaluation of methods for the determination of tortuosity of Li-ion battery separators

Localized Tortuosity Determination of Li-Ion Battery Electrode Using SECM and SICM

Determination and Engineering of Li‐Ion Tortuosity in Electrode Toward High Performance of Li‐Ion Batteries

Two Methods For Simulating The Relationship Between The Tortuosity And Porosity

Determination and Engineering of Li‐Ion Tortuosity in Electrode Toward High Performance of Li‐Ion Batteries (Adv. Energy Mater. 31/2024)

Topological and Network Analysis of Lithium Ion Battery Components: The Importance of Pore Space Connectivity for Cell Operation

The electrode tortuosity factor: why the conventional tortuosity factor is not well suited for quantifying transport in porous Li-ion battery electrodes and what to use instead

Understanding the microstructure behaviour of the Li-ion battery separator under compression using 3D image-based modelling

The Mechanism of Inhomogeneous Mass Transfer Process of Separators in Lithium-Ion Batteries

Unraveling Anisotropic Mechanical Behaviors of Lithium-Ion Battery Separators: Microstructure Insights

Deformation and failure characteristics of four types of lithium-ion battery separators

Mechanical behavior and failure mechanisms of Li-ion battery separators

Numerical Investigation on the Impact of Linear Variation of Positive Electrode Porosity upon the Performance of Lithium-Ion Batteries

Microstructure Evolution of Lithium‐Ion Battery Separator under Compressive Loading: In Situ Experiments and Image‐Based Finite Simulations

Pry into the Thermal and Mechanical Properties of Electrolyte-Soaked Separators

Orthotropic Viscoelastic Modeling of Polymeric Battery Separator

A Material Model for the Orthotropic and Viscous Behavior of Separators in Lithium-Ion Batteries under High Mechanical Loads

Overview on Theoretical Simulations of Lithium‐Ion Batteries and Their Application to Battery Separators

An Experimental and Computational Study on the Orthotropic Failure of Separators for Lithium-Ion Batteries

Comparative study of the electrochemical performances of different polyolefin separators in lithium/sulfur batteries

Electrical Tortuosity in Nanostructured Mesoporous Silica Powder and Nanocomposite Membranes