Abstract:The recent interest in microscopic autonomous systems, including microrobots, colloidal state machines, and smart dust, has created a need for microscale energy storage and harvesting. However, macroscopic materials for energy storage have noted incompatibilities with microfabrication techniques, creating substantial challenges to realizing microscale energy systems. Here, we photolithographically patterned a microscale zinc/platinum/SU-8 system to generate the highest energy density microbattery at the picoliter (10-12 liter) scale. The device scavenges ambient or solution-dissolved oxygen for a zinc oxidation reaction, achieving an energy density ranging from 760 to 1070 watt-hours per liter at scales below 100 micrometers lateral and 2 micrometers thickness in size. The parallel nature of photolithography processes allows 10,000 devices per wafer to be released into solution as colloids with energy stored on board. Within a volume of only 2 picoliters each, these primary microbatteries can deliver open circuit voltages of 1.05 ± 0.12 volts, with total energies ranging from 5.5 ± 0.3 to 7.7 ± 1.0 microjoules and a maximum power near 2.7 nanowatts. We demonstrated that such systems can reliably power a micrometer-sized memristor circuit, providing access to nonvolatile memory. We also cycled power to drive the reversible bending of microscale bimorph actuators at 0.05 hertz for mechanical functions of colloidal robots. Additional capabilities, such as powering two distinct nanosensor types and a clock circuit, were also demonstrated. The high energy density, low volume, and simple configuration promise the mass fabrication and adoption of such picoliter zinc-air batteries for micrometer-scale, colloidal robotics with autonomous functions.

All-Printed 3D Solid-State Rechargeable Zinc-Air Microbatteries

3D printing of solid-state zinc-ion microbatteries with ultrahigh capacity and high reversibility for wearable integration design

3D Printing of Customized Li-S Microbatteries

3D Printing Interdigital Lithium-Sulfur Micro-Batteries with High Areal Energy Density

3D Printing Flexible Sodium‐Ion Microbatteries with Ultrahigh Areal Capacity and Robust Rate Capability (Adv. Mater. 39/2022)

Design and Fabrication of A Micro Zinc/Air Battery

3D printing flexible zinc-ion microbatteries with ultrahigh areal capacity and energy density for wearable electronics

Three-dimensional printed carbon-based microbatteries: progress on technologies, materials and applications

Scalable Fabrication of Printed Zn//MnO 2 Planar Micro-Batteries with High Volumetric Energy Density and Exceptional Safety

Scalable fabrication of printed Zn//MnO2 planar micro-batteries with high volumetric energy density and exceptional safety

Multi-Channel Engineering of 3D Printed Zincophilic Anodes for Ultrahigh-Capacity and Dendrite-Free Quasi-Solid-State Zinc-Ion Microbatteries

Fabrications of High‐Performance Planar Zinc‐Ion Microbatteries by Engraved Soft Templates

All‐Solid‐State Battery Fabricated by 3D Aerosol Jet Printing

3D-printed flexible anode for high-performance zinc ion battery

On-Chip 3D Zn/NiOOH Helical Electrodes for High-Energy-Density Microbattery

Design and Manufacture of 3D-Printed Batteries

The status and challenging perspectives of 3D-printed micro-batteries

An Ultrahigh Energy Density Quasi‐Solid‐State Zinc Ion Microbattery with Excellent Flexibility and Thermostability

Alkaline Polymer Membrane‐Based Ultrathin, Flexible, and High‐Performance Solid‐State Zn‐Air Battery

Printed Solid-State Batteries

High energy density picoliter-scale zinc-air microbatteries for colloidal robotics