Abstract:In high‐temperature proton exchange membrane fuel cells (HT‐PEMFCs), the poisoning of Pt by phosphoric species severely affects the kinetics of the oxygen reduction reaction, which restricts their commercialized application. Herein, for the first time, the phosphate tolerance of PtFe ordered intermetallic alloys is enhanced by a doping‐modulated strain strategy via employing a low amount of Cu as a dopant to boost HT‐PEMFCs. This Cu doping facilitates the formation of compressive strain in PtFe crystals, consequently altering the electronic structure of electrocatalysts and then benefiting for weakening the adsorption energy between phosphoric acid and Pt surfaces. In addition, the high temperature phosphate adsorption tests also reveal that the dopant of Cu in Pt based electrocatalysts can improve the tolerance of phosphoric acid. The HT‐PEMFCs assembled by those cathodic electrocatalysts with the low‐Pt loading of 0.5 mgPt cm−2 achieve a preeminent peak power of 793.5 and 432.6 mW cm−2 under the condition of H2–O2 and H2–air atmosphere, respectively, or nearly 1.53 and 1.34 times higher as compared with commercial Pt/C electrocatalysts. Moreover, those electrocatalysts also exhibit robust stability under harsh condition in H2–O2 atmosphere with negligible activity loss for at least 100 h, exceeding most of other reported ORR electrocatalysts. This Cu doping in PtFe crystals facilitates the formation of compressive strain, consequently altering the electronic structure and then enhancing the phosphate tolerance. The maximum output power of Cu‐PtFe/NC in HT‐PEMFC reaches as high as 793.5 and 432.6 mW cm−2 under the condition of H2–O2 and H2–air atmosphere, respectively, exceeding that of most reported ORR electrocatalysts.

High-temperature annealing improves Pt utilization of proton exchange membrane fuel cell cathode catalysts

Annealing-temperature-dependent relation between alloying degree, particle size, and fuel cell performance of PtCo catalysts

Microwave application as an alternative method to increase the efficiency of PtC catalyst in PEMFCs

Fluorination-enabled Interface of PtNi Electrocatalysts for High-Performance High-Temperature Proton Exchange Membrane Fuel Cells

Durability Studies on Performance Degradation of Pt/C Catalysts of Proton Exchange Membrane Fuel Cell

Enhanced MEA Performance for PEMFCs under Low Relative Humidity and Low Oxygen Content Conditions Via Catalyst Functionalization

Effect of Annealing Heat Treatment on Stability of Pt-Ru-Ni/C Catalyst for Direct Methanol Fuel Cell

Revealing the Role of Surface Composition on the Particle Mobility and Coalescence of Carbon-Supported Pt Alloy Fuel Cell Catalysts by in Situ Heating (S)TEM

Silica-facilitated proton transfer for high-temperature proton-exchange membrane fuel cells

Catalytic Approaches Towards Highly Durable Proton Exchange Membrane Fuel Cells with Minimized Pt Use

The influences of catalyst combination on the high temperature proton exchange membrane fuel cell

Catalyst Development for High‐Temperature Polymer Electrolyte Membrane Fuel Cell (HT‐PEMFC) Applications

Effect of Heat Treatment on Structure of Carbon Shell-Encapsulated Pt Nanoparticles for Fuel Cells

Doping‐Modulated Strain Enhancing the Phosphate Tolerance on PtFe Alloys for High‐Temperature Proton Exchange Membrane Fuel Cells

Silica-facilitated Proton Transfer for High-Temperature Protonexchange Membrane Fuel Cells

Overcoming the Electrode Challenges of High-Temperature Proton Exchange Membrane Fuel Cells

Pt Nanoparticles on Atomic-Metal-Rich Carbon for Heavy-Duty Fuel Cell Catalysts: Durability Enhancement and Degradation Behavior in Membrane Electrode Assemblies

Heat-treated Multi-Walled Carbon Nanotubes As Durable Supports for PEM Fuel Cell Catalysts

Development of effective bimetallic catalyst for high‐temperature PEM fuel cell to improve CO tolerance

Improving Pt Utilization and Electrochemical Activity of Proton Exchange Membrane Fuel Cells Through Surface Modification of Carbon Nanotube Catalyst Support

Improved Performance of High‐Temperature Proton Exchange Membrane Fuel Cells by Purified CNT Nanoporous Sheets