Inoculating with the microbial agents to start up the aerobic composting of mushroom residue and wood chips at low temperature

Xiaojun Jia,Xiaomeng Qin,Xueping Tian,Yuan Zhao,Tao Yang,Jun Huang
DOI: https://doi.org/10.1016/j.jece.2021.105294
IF: 7.7
2021-08-01
Journal of Environmental Chemical Engineering
Abstract:<p>Aerobic composting of cellulosic biomass is difficult to start at low temperatures. Especially, the effect of microbial inoculants on the initiation of aerobic composting of cellulosic material at low temperature and the succession of microbial community is still poorly defined. In this study, the aerobic composting of mushroom residue and wood chips successfully started at 3-11ºC by inoculating the microbial agents (including bacteria and fungi) for cellulose degradation and low temperature adaptation. It was found that the inoculum was beneficial for the heating of the compost pile, starting of the aerobic composting process and the degradation of cellulose. The thermophilic stage of inoculation group lasted for 13 days and 8 days longer than that of control group. The degradation efficiencies of hemicellulose and cellulose in inoculation group and control group were 37.50% and 27.30%, while the degradation efficiencies of cellulose were 21.29% and 16.18%, respectively. Furthermore, the results of high-throughput sequencing revealed that inoculation of microbial agents was beneficial to the optimization of community structure and the conversion of cellulose substrate. In addition, the inoculated strains of <em>Aspergillus</em>, <em>Penicillium</em>, <em>Bacillus</em> and <em>Streptomyces</em> might play active roles in the composting process, especially in the set-up and thermophilic stage of the composting.</p>
engineering, chemical, environmental
What problem does this paper attempt to address?
The paper primarily explores the initiation of the aerobic composting process of a mixture of mushroom residues and sawdust under low-temperature conditions by inoculating microorganisms (including bacteria and fungi) and investigates the impact of these microbial inoculants on the succession of microbial communities during the composting process. Specifically, the study addresses the following key issues: 1. **Initiating aerobic composting under low-temperature conditions**: The study found that by inoculating microorganisms capable of degrading cellulose and adapting to low temperatures, the aerobic composting process of the mushroom residue and sawdust mixture can be successfully initiated in a low-temperature environment of 3 to 11°C. 2. **Increasing compost temperature and extending the thermophilic phase**: The temperature of the compost pile in the inoculated group rose faster, and the thermophilic phase was 13 days longer than that of the control group, which is beneficial for accelerating the biotransformation and pathogen inactivation during the composting process. 3. **Improving cellulose degradation efficiency**: The hemicellulose and cellulose degradation efficiencies in the inoculated group were increased by 37.50% and 21.29%, respectively, compared to the control group, indicating that inoculating microorganisms can significantly enhance the degradation efficiency of compost materials. 4. **Optimizing microbial community structure**: High-throughput sequencing technology revealed that inoculating microorganisms helps optimize the microbial community structure during the composting process and promotes the transformation of cellulose substrates. 5. **Role of key microorganisms**: The study also found that the inoculated genera *Aspergillus*, *Penicillium*, *Bacillus*, and *Streptomyces* may play important roles in the composting process, especially during the initiation and thermophilic phases. In summary, this paper experimentally demonstrates that inoculating specific microorganisms can effectively initiate and accelerate the aerobic composting process of cellulose-rich biomass waste under low-temperature conditions and provides a detailed analysis of the changes in microbial communities during this process. This has significant implications for improving the efficiency of biomass waste treatment under low-temperature conditions.