New Scheme of MEMS-Based LiDAR by Synchronized Dual-Laser Beams for Detection Range Enhancement

Chien-Wei Huang,Chun-Nien Liu,Sheng-Chuan Mao,Wan-Shao Tsai,Zning-Way Pei,Charles W. Tu,Wood-Hi Cheng
DOI: https://doi.org/10.3390/s24061897
IF: 3.9
2024-03-16
Sensors
Abstract:A new scheme presents MEMS-based LiDAR with synchronized dual-laser beams for detection range enhancement and precise point-cloud data without using higher laser power. The novel MEMS-based LiDAR module uses the principal laser light to build point-cloud data. In addition, an auxiliary laser light amplifies the single-noise ratio to enhance the detection range. This LiDAR module exhibits the field of view (FOV), angular resolution, and maximum detection distance of 45° (H) × 25° (V), 0.11° (H) × 0.11° (V), and 124 m, respectively. The maximum detection distance is enhanced by 16% from 107 m to 124 m with a laser power of 1 W and an additional auxiliary laser power of 0.355 W. Furthermore, the simulation results show that the maximum detection distance can be up to 300 m with laser power of 8 W and only 6 W if the auxiliary laser light of 2.84 W is used, which is 35.5% of the laser power. This result indicates that the synchronized dual-laser beams can achieve long detection distance and reduce laser power 30%, hence saving on the overall laser system costs. Therefore, the proposed LiDAR module can be applied for a long detection range in autonomous vehicles without requiring higher laser power if it utilizes an auxiliary laser light.
engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
What problem does this paper attempt to address?
The paper attempts to address the problem of how to improve the detection range and point cloud data accuracy of MEMS (Micro-Electro-Mechanical Systems)-based LiDAR (Light Detection and Ranging) without increasing laser power. Specifically, the authors propose a new MEMS-based LiDAR scheme that enhances the detection range by synchronizing dual laser beams without using higher power lasers. This scheme utilizes the theory of optical stochastic resonance, allowing the auxiliary laser beam to amplify the signal of the main laser beam, thereby improving the system's signal-to-noise ratio and enhancing the detection distance. ### Main Problems and Solutions: 1. **Problem**: Traditional LiDAR systems typically require high-power lasers, high-sensitivity detectors, and complex receiving systems to improve detection range, leading to bulky systems and high costs. 2. **Solution**: The paper proposes a novel MEMS-based LiDAR system that enhances detection range by synchronizing dual laser beams. The main laser beam is used to construct point cloud data, while the auxiliary laser beam amplifies the signal and improves the signal-to-noise ratio. This method significantly increases the LiDAR detection range without increasing laser power. ### Experimental Results: - **Detection Range**: Experimental results show that with the auxiliary laser beam, the maximum detection distance increased from 107 meters to 124 meters, an improvement of approximately 16%. - **Simulation Results**: Further simulation results indicate that when the main laser power is 8 watts and the auxiliary laser power is 2.84 watts, the maximum detection distance can reach 300 meters. This demonstrates that the synchronized dual laser beam technology can achieve longer detection distances while reducing the overall laser system cost. ### Application Prospects: This new MEMS-based LiDAR system has broad application prospects, especially in fields such as autonomous vehicles, surveillance, and rapid 3D modeling. It can achieve long-distance detection and high-precision point cloud data generation without using higher power lasers.