Design optimization of solar collectors with hybrid nanofluids: An integrated ansys and machine learning study
Omer A. Alawi,Haslinda Mohamed Kamar,Ali H. Abdelrazek,A.R. Mallah,Hussein A. Mohammed,Raad Z. Homod,Zaher Mundher Yaseen
DOI: https://doi.org/10.1016/j.solmat.2024.112822
IF: 6.9
2024-03-31
Solar Energy Materials and Solar Cells
Abstract:The current study discussed the integration between two computational approaches to evaluate the hydrothermal properties, such as pressure drop (ΔP), energy efficiency (η eng ), and absorbed energy (Q abs ) of solar collectors using hybrid nanofluids. The physical problem was solved through a 3D model using Ansys 2021R1. After that, the three outputs were predicted through MATLAB R2022b using Optimize a Boosted Regression Ensemble by implementing Least-Squares Boosting (LSBoost) with Bayesian optimization (BO). Various working fluids were tested: distilled water (DW), Graphene oxide (GO-DW) nanofluids, and hybrid graphene oxide/silicon dioxide (GO/SiO 2 -DW) nanofluids in the mixing ratio (50:50), in the concentration range 0.01-1 vol%. The simulations covered a range of Reynolds numbers (300 ≤ Re ≤ 1500) and inlet temperatures (30 °C, 40 °C, 50 °C, and 60 °C). The results indicated that, the maximum variation compared to the first and second validations for mass flow rates and different nanofluid concentrations was between 3.96-4.71% and 4.32–6.45%. At an inlet temperature of 30 °C, GO-DW-1% exhibited the highest ΔP, η eng , and Q abs , while GO-SiO 2 -DW-1% closely followed with slightly lower energy values. The maximum errors between computational fluid dynamics and machine learning predictions for (ΔP), (η eng ), and (Q abs ) ranged from 2.40% to 6.32%, depending on the type of nanofluids (single or hybrid) and the volume concentration. To conclude, the current approach showed a promising result in the photothermal devices.
materials science, multidisciplinary,physics, applied,energy & fuels