Abstract:Besides reducing pollution and removing urea from wastewater, electro-oxidation of urea has also offered new prospects for filling the overall water gap for economically producing hydrogen. In this regard, a simple and low-cost electrochemical deposition technique was used to prepare a highly efficient bifunctional electrocatalyst for the HER and the UOR (in place of the OER) on nickel foam (NiFeSP/NF). A three-dimensional and nanoporous NiFeSP/NF electrocatalyst demonstrated relatively high stability and electrocatalytic activity. Notably, the bimetallic and dual-anionic NiFeSP/NF electrode demonstrated good performance for the HER (42, 111 and 138 mV at current densities of −10, −100, and −200 mA cm −2 , respectively), the OER (1.451, 1.502, 1.528, and 1.576 V vs. RHE at 10, 100, 200 and 400 mA cm −2 , respectively), and the UOR (1.304, 1.346, 1.389 and 1.473 V vs. RHE at current densities of 10, 100, 200 and 400 mA cm −2 , respectively). Moreover, the use of a NiFeSP/NF||NiFeSP/NF pair as an anode and a cathode in an overall water-splitting system assisted by urea achieved 1.348 and 1.582 V vs. RHE at 10 and 100 mA cm −2 in 1.0 M KOH with 0.33 M urea solution, which are 163 and 234 mV lower than those achieved in 1.0 M KOH alkaline solution, respectively. Additionally, the NiFeSP/NF||NiFeSP/NF pair demonstrates long-term stability (30 h) in a chronopotentiometry test at 100 mA cm −2 in 1.0 M KOH with 0.33 M urea solution. This bimetallic and dual-anionic NiFeSP electrode exhibits substantial catalytic activity due to the appropriate synergy between Fe and Ni, the modification of the electronic structure enabled by the dual anions, and the enhanced electrocatalytically active surface caused by high porosity. The low cost and single-step manufacturing method of the NiFeSP electrode, high electrocatalytic activity, and stability make it potentially ideal for commercial use in hydrogen generation and treatment of wastewater containing urea.

Electrodeposited Ni-Fe alloy a cost-effective material for harnessing hydrogen via oxygen evolution and urea oxidation reaction

Nickel Oxide/nickel Nanohybrids for Oxygen and Hydrogen Evolution in Alkaline Media

Enhancing hydrogen generation through urea electro-oxidation on a bimetallic and dual-anionic NiFeSP/NF nanostructured electrode

Electrochemically Induced Cu-NiOOH/Cu2O/Cu Mesh Heteroarchitecture with Cu-Ni Dual Active Sites As Efficient Bifunctional Electrocatalyst for Urea-Assisted Energy-Saving Hydrogen Production in Alkaline Electrolyte

Porous Flower-Like Nickel Nitride As Highly Efficient Bifunctional Electrocatalysts for Less Energy-Intensive Hydrogen Evolution and Urea Oxidation

Co-doped Ni-Mo oxides: highly efficient and robust electrocatalysts for urea electrooxidation assisted hydrogen production

Nickel Hydroxysulfide Electrocatalyst Promotes Urea Oxidation for Energy‐Saving Hydrogen Production

Co-doped MnS/NiS/Ni3S2 in situ grown on hydrophilic nickel foam for energy-efficient urea-assisted alkaline hydrogen production

Synergistic engineering of heteroatom doping and heterointerface construction in V-doped Ni(OH) 2 /FeOOH to boost both oxygen evolution and urea oxidation reactions

NiFe Alloy Integrated with Amorphous/Crystalline NiFe Oxide as an Electrocatalyst for Alkaline Hydrogen and Oxygen Evolution Reactions

Modulating the electronic structure of Ni(OH)2 by coupling with low-content Pt for boosting urea oxidation reaction enables significantly promoted energy-saving hydrogen production

Cauliflower-like NiFe alloys anchored on a flake iron nickel carbonate hydroxide heterostructure towards superior overall water and urea electrolysis

Boosting hydrogen production via water and urea oxidation using a facile fabricated alkali-etched ZIF-67@Ni(OH) 2 electrocatalyst

Enhanced hydrogen production via urea electrolysis over Ni-NiO electrodeposited on Ti mesh

Efficient Synthesis Strategy and Synergistic Effect of Ni-Fe-Ru Electrode for Boosting Alkaline Water Electrolysis

Electrochemical semi-sacrificial growth of self-supporting MOF-based electrode for urea electrooxidation-coupled water electrolysis

Self-Supported Nickel Phosphide Electrode for Efficient Alkaline Water-to-Hydrogen Conversion Via Urea Electrolysis

One-step electrodeposited NiFeMo hybrid film for efficient hydrogen production via urea electrolysis and water splitting

PEO-PPO-PEO induced holey NiFe-LDH nanosheets on Ni foam for efficient overall water-splitting and urea electrolysis

Pulse-reverse electrodeposition of Ni–Mo–S nanosheets for energy saving electrochemical hydrogen production assisted by urea oxidation

Synergistic engineering of heterostructure and oxygen vacancy in cobalt hydroxide/aluminum oxyhydroxide as bifunctional electrocatalysts for urea-assisted hydrogen production