Abstract:The mechanical response and failure mechanism of commercially pure titanium subjected to combined tension-torsion loading are studied experimentally at strain rates ranging from 10−3 s−1 to 103 s−1. A novel tension-torsion split Hopkinson bar (TTHB) equipped with a high speed camera was utilised during high-rate experiments, while quasi-static tests were conducted using a universal screw-driven machine. The multiaxial dynamic experiments demonstrate the ability of the developed TTHB apparatus to achieve synchronisation of longitudinal and torsional waves upon loading the specimen, to satisfy the dynamic equilibrium of the specimen and to attain constant strain rate loading. The failure envelope of commercially pure titanium was analysed over a wide range of stress states including pure torsion, shear-dominated combined tension-shear, tension-dominated combined tension-shear, and plain tension. The analyses of the loading paths show that these were nearly proportional in terms of strain. The multiaxial failure stress locus was constructed in the normal versus shear stress space from experiments conducted at low and high rates of strain.The Drucker-Prager criterion was employed to approximate the failure envelope and to assess its rate sensitivity. The failure stress locus of commercially pure titanium and its rate dependence are reported for the first time. The TTHB apparatus developed allows the definition of the failure stress locus of aerospace materials directly from experiments and, therefore, the evaluation of the existing failure/yielding criteria.

Enhancing Specimen Grip in Torsional Split Hopkinson Bar to Characterize Engineering Materials Under Pure Torsional Load

A Review of the Torsional Split Hopkinson Bar

Development of Tensile Split Hopkinson Pressure Bar Technique for Studying the Dynamic Behaviour of Metals

A new split Hopkinson tensile bar design

Study of Ligament Length Effect on Mode Mix of a Modified In-Plane Shear Test Specimen

Design of an Innovative System for Wave Generation in Direct Tension–Compression Split Hopkinson Bar

A novel Hopkinson tension bar system for testing polymers under intermediate strain rate and large deformation

Material characterization at high strain rate by Hopkinson bar tests and finite element optimization

Piezo-driven clamp release for synchronisation and timing of combined direct-shear stress waves

Achieving synchronous compression-shear loading on SHPB by utilizing mechanical metamaterial

A Novel Integrated Tension-Compression Design for A Mini Split Hopkinson Bar Apparatus

Experimental analysis of the multiaxial failure stress locus of commercially pure titanium at low and high rates of strain

Experimental Technique of High Strain-Rate Tension Based on Hopkinson Bar

Development of a large-scale torsional split Hopkinson tube for dynamic shear test of mortar material

Device and method for investigation of mechanical properties of the materials under high-strain rate tensile load

Material behaviour characterisation using SHPB techniques, tests and simulations

The use of the Hopkinson bar to validate constitutive relations at high rates of strain

Dynamic shear response of a polymer bonded explosive using a modified Hopkinson bar apparatus

Challenges related to testing of composite materials at high strain rates using the split Hopkinson bar technique

An alternative method for the measurement of mechanical properties at intermediate strain rates: a numerical study