Study on unconfined compressive strength and deformation characteristics of chlorine saline soil

Hongru Li,Min Yang

DOI: https://doi.org/10.1038/s41598-023-50441-5

IF: 4.6

2024-01-19

Scientific Reports

Abstract:The distribution of saline soil is wide and the area is large in China. The saline soil in different regions shows their own characteristics. The saline soil of single salt is configured by adding different contents of NaCl to the loess in Xi'an. The effects of chlorine content and water content on soil strength and volume change in a large water content range was studied, and the change mechanism was analyzed by scanning electron microscopy. The results show that the strength of chloride saline soil increases with the decrease of water content. The moisture content of 12% is the critical point of strength change of chloride saline soil. When the moisture content is greater than 12%, the strength of soil decreases with the increase of salt content. When the water content is less than 12%, the strength of saline soil is 3% NaCl content > 1% NaCl content > 5% NaCl content > 0% NaCl content. The volume change of the sample consists of three parts: elastic deformation during sample pressing, volume shrinkage during water loss and salt expansion. In the absence of NaCl and 1% NaCl content, the sample was in the state of shrinkage during the loading process, in which with the decrease of moisture content shrinkage rate slowed down. The volume change rate of 3% and 5% NaCl showed an inflection point from negative to positive when the water content was 15%. When the water content is less than 12%, the saline soil with 3% NaCl content has the characteristics of high strength and unobvious salt expansion. The method of adding 3% NaCl to loess in Xi 'an area can be used to simulate the cement between soil particles, which provides a reference for artificially preparing structural soil. According to the microstructure analysis, the higher the salt content of saline soil, the smaller the soil pores, and the contact form of soil particles gradually develops from the point contact between soil particles to the salt-wrapped structure.

multidisciplinary sciences

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to explore the unconfined compressive strength and deformation characteristics of saline - chloride soil under different water and salt contents. Specifically, the researchers prepared single - salt saline soil by adding different contents of NaCl to the loess in Xi'an area, studied the influence of salt content and water content on soil strength and volume change, and analyzed the change mechanism through scanning electron microscopy. The main purpose of the study is to better understand the mechanical behavior of saline soil under different conditions and provide a reference for artificially preparing structural soil.

### Main research contents:
1. **Influence of salt and water on soil strength**: The study found that regardless of dry density and salt content, soil strength increases as water content decreases. A water content of 12% is a key point for the strength change of saline - chloride soil. When the water content exceeds 12%, the soil strength decreases as the salt content increases; when the water content is below 12%, the strength of the saline soil with 3% NaCl content is the highest, followed by 1% NaCl, and the strength of 5% NaCl is the lowest.

2. **Characteristics of soil volume change**: Soil volume change consists of three parts: elastic deformation during the compression process, volume shrinkage during the water loss process, and salt expansion. In the absence of NaCl or with 1% NaCl content, the samples are in a shrinking state, and the shrinkage rate gradually slows down as the water content decreases. For samples with 3% and 5% NaCl content, when the water content is 15%, the volume change rate changes from negative to positive.

3. **Micro - structural analysis**: Observation through scanning electron microscopy (SEM) shows that the higher the salt content, the smaller the pores of the sample, and the contact form of soil particles gradually develops from point contact to a salt - particle - wrapped structure. This explains why high salt content can change the pore structure of the soil and affect its strength and deformation characteristics.

### Conclusions:
1. Regardless of dry density and salt content, soil strength increases as water content decreases. A water content of 12% is a key point for the strength change of saline - chloride soil.
2. When the water content is below 12%, the strength of the saline soil with 3% NaCl content is the highest, followed by 1% NaCl, and the strength of 5% NaCl is the lowest.
3. Soil volume change consists of elastic deformation, volume shrinkage, and salt expansion.
4. The saline soil with 3% NaCl content will not expand when the water content is below 12%, and chloride salt increases the connection between soil particles and enhances the soil strength.
5. The change of salt content has a significant impact on the microstructure of the soil. High salt content will reduce the pore size and change the contact form of soil particles.

These research results provide an important scientific basis for understanding and predicting the behavior of saline soil under different environmental conditions and are of great significance for engineering applications.