Abstract:Hydrogen as an important clean energy source with a high energy density has attracted extensive attention in fuel cell vehicles and industrial production. However, considering its flammable and explosive property, gas sensors are desperately desired to efficiently monitor H2 concentration in practical applications. Herein, a facile polymerization-induced aggregation strategy was proposed to synthesize uniform Si-doped mesoporous WO3 (Si-mWO3) microspheres with tunable sizes. The polymerization of the melamine-formaldehyde resin prepolymer (MF prepolymer) in the presence of silicotungstic acid hydrate (abbreviated as H4SiW) leads to uniform MF/H4SiW hybrid microspheres, which can be converted into Si-mWO3 microspheres through a simple thermal decomposition treatment process. In addition, benefiting from the pore confinement effect, monodispersed Pd-decorated Si-mWO3 microspheres (Pd/Si-mWO3) were subsequently synthesized and applied as sensitive materials for the sensing and detection of hydrogen. Owing to the oxygen spillover effect of Pd nanoparticles, Pd/Si-mWO3 enables adsorption of more oxygen anions than pure mWO3. These Pd nanoparticles dispersed on the surface of Si-mWO3 accelerated the dissociation of hydrogen and promoted charge transfer between Pd nanoparticles and WO3 crystal particles, which enhanced the sensing sensitivity toward H2. As a result, the gas sensor based on Pd/Si-mWO3 microspheres exhibited excellent selectivity and sensitivity (Rair/Rgas = 33.5) to 50 ppm H2 at a relatively low operating temperature (210 °C), which was 30 times higher than that of the pure Si-mWO3 sensor. To develop intelligent sensors, a portable sensor module based on Pd/Si-mWO3 in combination with wireless Bluetooth connection was designed, which achieved real-time monitoring of H2 concentration, opening up the possibility for use as intelligent H2 sensors.

Synthesis and gasochromic hydrogen sensing properties of sodium tungsten bronze films by atmospheric flame vapor deposition

Substantially Accelerated Response and Recovery in Pd‐Decorated WO3 Nanorods Gasochromic Hydrogen Sensor

Fabrication and optical hydrogen gas sensing property of hierarchical WO3 Porous/Nanowires film

Gasochromic WO 3 /MoO 3 sensors prepared by co-sputtering for hydrogen leak detection with long-lasting visible signal

Effect of Structural Changes of Pd/WO 3 Thin Films on Response Direction and Rate in Hydrogen Detection

Colloidal Synthesis of Tungsten Oxide Quantum Dots for Sensitive and Selective H2S Gas Detection

H2 Sensing Properties of Pd Modified WO3-Fe2O3 Nanostructured Composite Films Prepared by Amorphous W-Fe Dealloying.

Block copolymer-templated gasochromic WO 3 thin films with uniform mesopores for fast optical hydrogen sensing

Enhancement of H2 Gas Sensing Using Pd Decoration on ZnO Nanoparticles

Enhanced response of WO 3 thin film through Ag loading towards room temperature hydrogen gas sensor

Pd Nanoparticle Film on a Polymer Substrate for Transparent and Flexible Hydrogen Sensors.

Sensitization of Pd Loading for Remarkably Enhanced Hydrogen Sensing Performance of 3DOM WO3

In-situ synthesis of needle-like PdO-decorated NiO thin films on Al2O3 substrates for high-performance H2 sensors

Pd films on soft substrates: a visual, high-contrast and low-cost optical hydrogen sensor

Fabrication of a Gas Sensor from Thin Films of Tungsten Oxide Nanoparticles and Their Use in Oil Refineries

Enhanced Pd/a‐WO3/VO2 Hydrogen Gas Sensor Based on VO2 Phase Transition Layer

Polymerization-Induced Aggregation Approach Toward Uniform Pd Nanoparticle-Decorated Mesoporous SiO2/WO3 Microspheres for Hydrogen Sensing.

Surface-broken palladium and palladium oxide core/shell nanowires for stable hydrogen sensing at room temperature

Synthesis of monoclinic WO3 nanosphere hydrogen gasochromic film via a sol–gel approach using PS-b-PAA diblock copolymer as template

Hydrogen Sensitivity Performance of Pd Doped SnO2 Nanostructured Film Fabricated by Spray Pyrolysis

Hydrogen Gas Sensing Properties of Mixed Copper-Titanium Oxide Thin Films