Abstract:A homogeneous distribution of inorganic fillers and their integration with polymer matrix is the primary challenge for advancement of mixed matrix membranes (MMMs) in pervaporation. Due to well-defined structure and multi-functional groups attached to the apex silicon atoms, polyhedral oligomeric silsesquioxane (POSS) provides a high possibility of good compatibility with diverse polymer matrix at the molecular level. In this work, soluble and reactive octa[(trimethoxysilyl)ethyl]-POSS(OPS) was synthesized, which was used as macro-crosslinker and reinforced porous fillers of polydimethylsiloxane (PDMS) synchronously to prepare a series of OPS/PDMS MMMs. The OPS/PDMS MMMs were characterized by FT-IR, XRD, SEM, TGA, DSC, PALS, vapor adsorption measurement and tensile test. It was found that OPS dispersed homogeneously in PDMS matrix and achieved good integration with PDMS based on SEM and DSC characterization. PALS results indicated that compared with pure PDMS membrane, OPS/PDMS MMMs with proper OPS loading showed much larger radii of free volume cavities (r(3), r(4)) and fractional free volumes (f(v3), f(v4) and f(v)). The numerous hydrophobic POSS cages and enlarged PDMS' free volume would effectively improve the diffusion selectivity towards ethanol. Vapor adsorption results showed that the chemical incorporation of moderate amount OPS into PDMS not only improved ethanol vapor adsorption amount, but also depressed water adsorption amount in PDMS, which would obviously improve PDMS' sorption selectivity to ethanol. As applied to the bio-ethanol recovery from aqueous solutions, the prepared OPS/PDMS MMMs exhibited a simultaneous increase in permeation flux and separation factor, breaking the permeation flux-separation factor trade-off limitation. As OPS loading was 7.5 weA, the separation factor of OPS/PDMS MMMs reached the maximum value of 16.4 (109% higher than that of pure PDMS membrane), with permeation flux of 253.1 g/m(2) h (32% higher than that of pure PDMS membrane). Experimental results showed that an increase in operation temperature resulted in an increase in permeation flux, but decrease in permeability, separation factor and selectivity. The pervaporation performance of OPS/PDMS MMMs kept stable during two days operation time. This work may provide useful insights of high-performance MMMs with a POSS embedded selective layer for biofuel separation.

3D structure enhancers based on functionalized MIL-53(Al) for improved dimethyl carbonate/methanol pervaporative separation

Modified MCM‐41 Silica Spheres Filled Polydimethylsiloxane Membrane for Dimethylcarbonate/methanol Separation Via Pervaporation

Improved Ethanol Recovery Through Mixed-Matrix Membrane with Hydrophobic Maf-6 As Filler

Preparation of continuous NH2–MIL-53 membrane on ammoniated polyvinylidene fluoride hollow fiber for efficient H2 purification

Preparation of Stable Multilayer PDMS Composite Pervaporation Membrane Incorporated with In-Situ Transformed Metal Organic Frameworks for Enhanced Butanol Recovery

Hydrophobic Nano-Silica/polydimethylsiloxane Membrane for Dimethylcarbonate–methanol Separation Via Pervaporation

Separation of azeotropic dimethylcarbonate/methanol mixtures by pervaporation: Sorption and diffusion behaviors in the pure and nano silica filled pdms membranes

Functionalized MOF-Derived Nanoporous Carbon as Compatible Nanofiller to Fabricate Defect-Free PDMS-Based Mixed Matrix Pervaporation Membranes

Significantly Improved Pervaporation Performance by Relatively Continuous and Defect-Free Distribution of IL-modified ZIF-8 in PDMS Membrane

Coordinate covalent grafted ILs-modified MIL-101/PEBA membrane for pervaporation: Adsorption simulation and separation characteristics

High-performance CO2-selective Hybrid Membranes by Exploiting MOF-breathing Effects.

Pervaporation Performances of Polydimethylsiloxane Membranes for Separating Dimethyl Carbonate/methanol Mixtures

Pervaporation of dimethyl carbonate/methanol mixtures through polydimethylsiloxane membranes

(3-Aminopropyl) Triethoxysilane-Modified ZIF-90 Nanoparticle/Polydimethylsiloxane Mixed Matrix Membranes for Ethanol Recovery via Pervaporation

Surface Modification of Silicalite-1 with Alkoxysilanes to Improve the Performance of PDMS/silicalite-1 Pervaporation Membranes: Preparation, Characterization and Modeling

Enhanced Pervaporation Performance of PDMS Membranes Based on Nano-Sized Octa[(trimethoxysilyl)ethyl]-POSS As Macro-Crosslinker

A mechanically enhanced metal-organic framework/PDMS membrane for CO2/N2 separation

POSS/PDMS MMMs with Reversal Trade-off Effect: Characterization and Enhanced Permeation Flux

Removing of dimethyl carbonate from dimethyl carbonate/methanol azeotrope by pervaporation

Efficient separation of methanol/dimethyl carbonate mixtures by UiO-66 MOF incorporated chitosan mixed-matrix membrane

Pervaporation chitosan membranes modified with carbon nanoparticles for enhanced isopropanol dehydration