Abstract:2D materials possess great potential to serve as gas-sensing materials due to their large, specific surface areas and strong surface activities. Among this family, transition metal chalcogenide materials exhibit different properties and are promising candidates for a wide range of applications, including sensors, photodetectors, energy conversion, and energy storage. Herein, a high-shear mixing method has been used to produce multilayered MoS2 nanosheet dispersions. MoS2 thin films were manufactured by vacuum-assisted filtration. The structural morphology of MoS2 was studied using ς-potential, UV-visible, scanning electron microscopy (SEM), atomic force microscopy (AFM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray diffraction (XRD), and Raman spectroscopy (RS). The spectroscopic and microscopic analyses confirm the formation of a high-crystalline MoS2 thin film with good inter-sheet connectivity and relative thickness uniformity. The thickness of the MoS2 layer is measured to be approximately 250 nm, with a nanosheet size of 120 nm ± 40 nm and a number of layers between 6 and 9 layers. Moreover, the electrical characteristics clearly showed that the MoS2 thin film exhibits good conductivity and a linear I-V curve response, indicating good ohmic contact between the MoS2 film and the electrodes. As an example of applicability, we fabricated chemiresistive sensor devices with a MoS2 film as a sensing layer. The performance of the MoS2-chemiresistive sensor for NO2 was assessed by being exposed to different concentrations of NO2 (1 ppm to 10 ppm). This sensor shows a sensibility to low concentrations of 1 ppm, with a response time of 114 s and a recovery time of 420 s. The effect of thin-film thickness and operating temperatures on sensor response was studied. The results show that thinner film exhibits a higher response to NO2; the response decreases as the working temperature increases.

Room Temperature Formation of Carbon Onions via Ultrasonic Agitation of MoS2 in Isopropanol

In Situ Formation and Structure Tailoring of Carbon Onions by High-Resolution Transmission Electron Microscopy

Methane Catalytic Cracking to Make Hydrogen and Graphitic Nano Carbons (nanotubes, Microfibers, Microballs, Onions) with Zero Emission

Properties of Carbon Onions Produced by an Arc Discharge in Water

Synthesis of Carbon 'onions' in Water

Structure Of Carbon Onions And Nanotubes Formed By Arc In Liquids

Ultrasound-assisted cracking process to prepare MoS2 nanorods.

Enhancing the specific capacity and rate performance of MoS<sub>2</sub> nanomaterials <i>via</i> introducing subgrains at a hydrothermal temperature 160 C

Facile Preparation of Few-layer MoS2-NS by Liquid-Phase Ultrasonic Exfoliation

Ultrahigh vacuum scanning probe microscopy studies of carbon onions

Formation of MoS2 Inorganic Fullerenes (ifs) by the Reaction of MoO3 Nanobelts and S

Low-temperature Solution Synthesis of Carbon Nanoparticles, Onions and Nanoropes by the Assembly of Aromatic Molecules

Direct Exfoliation Of Natural Sio2-Containing Molybdenite In Isopropanol: A Cost Efficient Solution For Large-Scale Production Of Mos2 Nanosheetes

Formation Mechanism for Oxidation Synthesis of Carbon Nanomaterials and Detonation Process for Core-Shell Structure

From MoO2@MoS2 Core-Shell Nanorods to MoS2 Nanobelts

Liquid Shear Exfoliation of MoS2: Preparation, Characterization, and NO2-Sensing Properties

Oxidation layering mechanism of graphene-like MoS2 prepared by the intercalation-detonation method

Molecular Simulation of MoS2 Exfoliation

High-yield exfoliation of MoS2 nanosheets by a novel spray technique and the importance of soaking and surfactants

Large Area Vapor Phase Growth and Characterization of MoS2 Atomic Layers on SiO2 Substrate

Efficient Exfoliation of Molybdenum Disulphide Nanosheets by a High-Pressure Homogeniser