Abstract:The large and growing volume of tire waste and sewage sludge requires disposal, for which thermochemical processes such as gasification can be used. Co-gasification of these two waste products allows the tire char to be used as a charge stabilizer and the sewage sludge to improve reactivity and efficiency. The purpose of this study was to evaluate the effect of the composition of a waste tire char and sewage sludge fuel blend on the gasification process, using steam as the gasification agent. Tests were carried out for tire char, municipal sewage sludge, and blends of the two in ratios of 90:10 and 67:33. An analysis of the materials used was carried out (ultimate and proximate analysis as well as ash composition), and isothermal measurements of steam gasification were taken using the thermal volumetric method for temperatures of 800, 850, and 900 °C at an elevated pressure of 1 MPa. On the basis of the results, the formation curves of the main gasification products (H2, CO, CO2, and CH4) were created, the curves for the degree of carbon conversion were plotted, the reactivity indexes were determined for different degrees of conversion (0.25, 0.5, and 0.75), and the quantity and composition of the resulting gas were analyzed. Using the grain model, the kinetic parameters (activation energy and pre-exponential factor) of the gasification reaction were calculated. The addition of municipal sewage sludge had a positive effect on the reactivity of tire char and increased the efficiency of gasification, because it contained components that act as catalysts in the gasification process. There was a favorable effect from the addition and higher amount of sewage sludge on lowering both the activation energy (49.5 kJ/mol and 89.2 kJ/mol for 90:10 and 67:33 blends, respectively) and the pre-exponential factor. A significant improvement in reactivity, with a high degree of conversion and the best gas composition, was obtained for a 90:10 blend at 900 °C.

Utilization of waste tire powder for gaseous fuel generation via CO2 gasification using waste heat in converter vaporization cooling flue

High-quality syngas production: The green and efficient utilization of waste tire and waste heat from the steelmaking converter process

Thermal analysis technology to utilize waste biomass and waste heat to produce high-quality combustible gas through simulations and experiments

Study on Steam Co-Gasification of Waste Tire Char and Sewage Sludge

Co-pyrolysis of Corn Stover and Waste Tire: Pyrolysis Behavior and Kinetic Study Based on Fraser-Suzuki Deconvolution Procedure

Gasification Characteristics of Waste Tires in Laboratory-Scale Fluidized-Bed Gasifier

Co-combustion of Coal and Carbonaceous Wastes: Thermogravimetric Analysis

Co-gasification of Acid Hydrolysis Residues and Sewage Sludge in a Downdraft Fixed Gasifier with CaO As an In-Bed Additive

Gasification kinetics of waste tire char with CO2

Effect of spent fluid catalytic cracking (FCC) catalyst on syngas production from pyrolysis and CO2-assisted gasification of waste tires

Gasification of waste tires in a circulating fixed-bed reactor within the scope of waste to energy

Production of high-quality combustible gas: The green and efficient utilization of inferior dust removal ash and high-temperature flue gas in converters

Flue gas torrefaction of municipal solid waste: Fuel properties, combustion characterizations, and nitrogen /sulfur emissions

Thermodynamic analysis of a carbon capture hydrogen production process for end-of-life tires using plasma gasification

Thermogravimetric analysis of the co-combustion of the blends with high ash coal and waste tyres

A Component Synergy of Flue Gas Torrefaction of Municipal Solid Waste

Low-temperature Gasification of Waste Tire in a Fluidized Bed

Two-Stage High Temperature Sludge Gasification Using The Waste Heat From Hot Blast Furnace Slags

CO2-assisted catalytic municipal sludge for carbonaceous biofuel via sub- and supercritical water gasification

Simulation of waste tire gasification in bubbling fluidized bed by Aspen: Contribution ratio analysis

Evaluation on Hydrothermal Gasification of Waste Tires Based on Chemical Equilibrium Analysis