Abstract:Drawing-tower fiber Bragg grating (FBG) array can be used in health monitoring of bridges, pipelines and some large-scale projects to realize temperature, stress and vibration quasi-distributed sensing. The grating array sensing system can detect the changes of the tested physical parameters by measuring the central wavelength of the grating. However, for the sensing system based on identical grating array consisting of uniform FBGs, it cannot measure accurately the shift of the reflective wavelength of a grating in the array due to the sidelobe superposition of the gratings. Compared with uniform Bragg grating, apodized FBG has smaller reflection peak sidelobes. It means that the reflection power of the apodized FBG can be concentrated to the central wavelength region, and the reflection peak signal will be not interfered with those of other gratings. In this paper, an apodized FBG array was in-line fabricated in a single mode fiber by on a drawing tower and used for dense quasi-distributed temperature sensing. The obtained apodized FBGs have a full width at half maximum (FWHM) of 0.09 nm and their sidelobes were decreased by -21.9 dB. A 1000-meter-long array consisting of 10000 apodized gratings was successfully fabricated and used for quasi-distributed temperature sensing. These gratings have good consistency, low transmission loss and good mechanical properties. Experimental results show that the array can accurately measure quasi-distributed temperature fields and the temperature sensitivity is 10.15 pm/degrees C. It is expected that the apodized grating array can find more applications in many fields.

Simultaneous distributed acoustic and temperature sensing system based on ultra-weak chirped fiber Bragg grating array

Coherent OTDR Based Ultra-High Sensitive Acoustic Sensor Assisted with Distributed Microstructured Optical Fiber(DMOF) and Hollow Cylinder Transducer

Distributed Forward Brillouin Scattering Sensor Based on Chirped Fiber Bragg Grating Array

Heterogeneous-frequency-dual-pulse Chain and Weak FBG Array for Quasi-Distributed Acoustic Sensing with Improved Response Bandwidth.

Coherent-detection-based Distributed Acoustic Impedance Sensing Enabled by a Chirped Fiber Bragg Grating Array

Quasi-Distributed Temperature Sensing Using Apodized Fiber Bragg Grating Array

Quasidistributed fiber Bragg grating sensor network based on self-heterodyne detection technique

An Enhanced Distributed Acoustic Sensor Based on UWFBG and Self-Heterodyne Detection

Non-Step-Scanning Rayleigh–Brillouin Distributed Fiber-Optic Sensing System Utilizing Double Sideband Modulation

Simultaneous displacement, temperature and strain sensing system based on fiber macro-bend loss and edge filter

A Comprehensive Study of Optical Fiber Acoustic Sensing

Phase Sensitive Distributed Vibration Sensing Based on Ultraweak Fiber Bragg Grating Array Using Double-Pulse

Broadband Fiber-Optic Acoustic Sensors

High-Sensitivity Strain and Temperature Simultaneous Measurement Sensor Based on Multimode Fiber Chirped Long-Period Grating

A Cheap and Practical FBG Temperature Sensor Utilizing a Long-Period Grating in a Photonic Crystal Fiber

An OTDR and Gratings Assisted Multifunctional Fiber Sensing System

Femtosecond Laser Written Ultra-Weak Fabry-Perot Array for Distributed Absolute Temperature Profile Sensing with High Spatial Resolution.

In-fiber chirped Fabry–Perot cavity for temperature sensing

Fiber optic acoustic sensor based on Fiber Bragg grating Fabry-Perot(FBG-FP)cavity

Enhanced quasi-distributed accelerometer array based on φ-OTDR and ultra-weak fiber Bragg grating

Fiber Bragg grating sensing system for temperature measurements based on optically injected DFB-LD with an OEO loop