Abstract:The gradation and mechanical properties of aggregates impressively affect the load carrying capacity and rutting resistance of asphalt mixtures. They are able to provide some fundamental parameters that are linked to mixture performance. In order to accurately detect critical controlled sizes and obtain more fundamental parameters that can characterize load carrying capacity and rutting resistance of asphalt mixtures, this paper aims to develop a mechanics-based approach to evaluate aggregate gradation, which contains the theoretical packing analysis and discrete element simulation. An extended theoretical morphology framework is developed by checking the local and global interlock of graded aggregates in the theoretical packing analysis. The sieve size range of primary structure which has an interactive interlock can be determined in the local interlock check model. The relationship between the transferred force and the induced force is proposed in the densest and loosest packing arrangements, respectively. The morphological parameters of disruption factor and weighted average size for the global scale are also proposed in theoretical packing analysis. Then the discrete element method is used to validate the theoretical framework. The advanced gradation input algorithm procedure is established in the discrete element simulation to simulate the compression test of graded aggregates. The mechanical parameters of contact force, contact points and stress-strain curves are extracted from the simulation results. The results show that the discrete element method can validate the theoretical framework and output the performance related parameters. The contact force analysis shows that the aggregates retaining on sieve sizes of 2.36 and 4.75 mm provide more than 50% contribution to resist load, and the aggregates retaining on sieve sizes of 1.18, 0.6 and 0.3 mm provide more than 50% contribution to stabilize the structure. The coordination number analysis suggests that the gradation with more fine aggregates might lead to a greater number of voids but smaller air-void size when the asphalt content and porosity remain constant. The stress-strain curve analysis shows that the modulus and secondary strain are highly related to the rutting performance of an asphalt mixture. (C) 2019 Elsevier Ltd. All rights reserved.

Testing and Evaluation of Hard Sandstone Aggregate in Hot Mix Asphalt

Analysis on gradation of AC-16 asphalt mix with Superpave design method

A Study on Effect of Coarse and Fine Aggregate on Asphalt Mixture Homogeneity

Mechanical Evaluation of Aggregate Gradation to Characterize Load Carrying Capacity and Rutting Resistance of Asphalt Mixtures

Performance Evaluation of Hard-Grade Paving Asphalt Mixture

Feasibility Evaluation of Preparing Asphalt Mixture with Low-Grade Aggregate, Rubber Asphalt and Desulphurization Gypsum Residues

Crushing Characteristics of Coarse Aggregates for Asphalt Mixtures under Simulated Laboratory Compaction Loads and Repeated Traffic Loads

Analysis of Distribution Properties of Coarse Aggregates in HMA Based on Delaunay Triangulation

Evaluation of HMA with Coal Gangue Coarse Aggregate

Laboratory Research of Hard Asphalt Mixture in China

Evaluation of Polishing Behavior of Fine Aggregates Using an Accelerated Polishing Machine with Real Tires

The Effect of Morphological Characteristic of Coarse Aggregates Measured with Fractal Dimension on Asphalt Mixture’s High-Temperature Performance

Concerted Design of Hard Paving Grade Asphalt High Modulus Mixture Based on the Aggregate Image Measurement System

Influence of Aggregate Index on Water Stability of Granite Asphalt Mixture

Multiscale Test Research on Interfacial Adhesion Property of Cold Mix Asphalt

Investigating the interaction between asphalt binder and fresh and simulated RAP aggregate

Examination of Poly (Styrene-Butadiene-styrene)-modified Asphalt Performance in Bonding Modified Aggregates Using Parallel Plates Method.

Evaluation of Compaction Characteristics of Asphalt Mixture under Different Compaction Effects

Experimental Research on Gradation Range and Performance of SMAC13

A Test Method to Evaluate the Adhesive Property between Asphalt and Aggregate Based on Simulating Actual Working Conditions

Modelling and Evaluation of Aggregate Morphology on Asphalt Compression Behavior