Numerical simulation of weld fracture using cohesive interface for novel inter-module connections
Jiahao Peng,Chao Hou,Luming Shen
DOI: https://doi.org/10.1016/j.jcsr.2020.106302
IF: 4.349
2020-11-01
Journal of Constructional Steel Research
Abstract:<p>Modular construction is an emerging building technique with inherent advantages such as faster construction speed, lower cost and environmental impact. However, it is of great challenge to design higher-rise modular buildings. The key element is to design a feasible inter-module connection that withstands excessive wind, seismic, and gravitational load. In this study, a novel tenon-connected inter-module connection is investigated through advanced numerical approach. Although the connection design minimises on-site activities as a simple bolting procedure, there are still manufactured weld joints that exist in the connection. As revealed by previous experimental studies, fracture of the weld joints is one of governing factors for the connection behaviour. In this paper, the weld fracture is simulated by using an innovative numerical approach that incorporates a cohesive interface model. The advantages of this cohesive interface model are threefold: firstly, it requires only two parameters, namely, the cohesive strength (<em>T</em><sub>0</sub>) and the critical separation (<em>δ</em><sub>c</sub>); secondly, it could be applied for both ductile and brittle fracture; thirdly, it is much less computationally demanding as compared with other sophisticated models. A calibration method for ratios <em>T</em><sub>0</sub>/<em>f</em><sub>y</sub> and <em>δ</em><sub>c</sub>/<em>ε</em><sub>y</sub> is proposed and validated using a standard compact tension test before modelling the inter-module connection. In the full range study of the novel connection, failure mechanisms are successfully simulated, including gap opening, column extrusion, and weld fracture. After validation of the connection model against existing test data, a parametric study is conducted to facilitate the optimal design of the inter-module connections.</p>
construction & building technology,engineering, civil