Abstract:Over the past twenty years, metal-organic frameworks (MOFs) have emerged as extensively developed porous class of materials and are increasingly recognized as promising candidates for membrane-based CO2 separation. This potential primarily stems from the ability to deliberately customize their structure and functionalities to enhance interactions with guest molecules. In this study, we explore the use of MOF-525, a porphyrin-based MOF, as a nanofiller in a mixed matrix membrane (MMM) composed of 6FDA-DAM (6FDA: 2,2-bis(3,4-dicarboxyphenyl)hexafluoropropane dianhydride; DAM: 2,4,6-trimethyl-1,3-diaminobenzene) polymer for CO2/N2 and CO2/CH4 separations. This particular MOF is chosen because of the possibility to metalate its porphyrin ring to tailor the interaction between the CO2 molecule and the MOF framework. As a result, the CO2/N2 and CO2/CH4 separation performance of the MMM loaded with metalated MOF-525 can be significantly improved without the necessity to use a very high nanoparticle loading. When compared to the bare polymeric membrane and 2 wt% non-metalated MOF-525 MMM, around 20% improvement in the membrane permeability and selectivity can be observed for the 2 wt% metalated MOF-525 MMM. Further analysis on the gas transport property of the MMM showed that the improvement mainly results from the enhanced CO2 solubility in the MMMs and improved interaction between the metalated MOF-525 and the CO2 molecule. However, it is also found that 2 and 5 wt% are the optimum loading value, above which the interfacial defects between the MOF nanoparticles and the polymers caused by the particle agglomeration starts to appear and thus deteriorating the membrane performance. This is also confirmed through the molecular simulations where some overestimations from the Maxwell model on the membrane permeability is observed particularly at high particle loading, indicating the agglomeration and the build-up of non-selective voids. Despite this, we have successfully shown in this study the high efficacy and efficiency of using metalated porphyrin MOFs for CO2 separation in a MMM since only relatively low particle loading (around 2 wt%) is required to improve the membrane performance.

Tailoring the separation performance of a carbon nanotube-based mixed matrix membrane decorated with metal-organic framework

Applications of Carbon Nanotubes(cnts) in Separation Membrane Materials

Carbon nanotube arrays hybrid membrane with excellent separation performance and conductivity

Carbon Nanotube-Based Mixed-Matrix Membranes with Supramolecularly Engineered Interface for Enhanced Gas Separation Performance

Interfacial growth of metal-organic framework on carboxyl-functionalized carbon nanotubes for efficient dye adsorption and separation

A backbone support structure and capillary effect-induced high-flux MOF-based mixed-matrix membrane for selective dye/salt separation

Investigation of MOF-525 and post-metalated MOF-525 as nanofillers in mixed matrix membranes for CO2 separation

Highly Flexible and Self‐Standing Covalent Organic Framework–Metal–Organic Framework (COF–MOF) Composite Crystalline Porous Material (CPM) Membrane for Molecular Separation

High Performance Gas Separation Mixed Matrix Membrane Fabricated by Incorporation of Functionalized Submicrometer-Sized Metal-Organic Framework

Study On Co2 Facilitated Separation Of Mixed Matrix Membranes Containing Surface Modified Mwcnts

High performance mixed-dimensional assembled MXene composite membranes for molecular sieving

Enhancing Nanofiltration Selectivity of Metal-Organic Framework Membranes via a Confined Interfacial Polymerization Strategy

Antifouling and Chemical-Resistant Nanofiltration Membrane Modulated by a Functionalized MWCNT Interlayer for Efficient Dye/Salt Separation at High Salinity

Nanocomposite polymer blend membrane molecularly re-engineered with 2D metal-organic framework nanosheets for efficient membrane CO2 capture

Surface-Etched Halloysite Nanotubes in Mixed Matrix Membranes for Efficient Gas Separation

Ultra-high flux loose nanofiltration membrane based on metal organic framework (CAU-10-H)/P84 co-polyimide for dye/salt fractionation from industrial waste water

Mixed Matrix Membranes Composed Of Two-Imensional Metal-Organic Framework Nanosheets For Pre-Combustion Co2 Capture: A Relationship Study Of Filler Morphology Versus Membrane Performance

ZIF-8 Hollow Nanotubes Based Mixed Matrix Membranes with High-Speed Gas Transmission Channel to Promote CO2/N2 Separation

Carbon Nanofiber Membranes Loaded with MXene@g-C3N4: Preparation and Photocatalytic Property

Synthesis of mixed matrix membrane utilizing robust defective MOF for size-selective adsorption of dyes

Highly permeable carbon nanotubes/polyamide layered membranes for molecular sieving