Abstract:Possessing the advantages of both polymeric membranes and the specific inorganic nanoparticles or nanotubes, mixed matrix membranes (MMMs) have captured the imagination of researchers for a possible technological breakthrough for efficient gas separation. However, it is still very challenging to achieve defect-free interface between fillers and polymer matrix. In this study, the naturally abundant and low cost halloysite nanotubes (HNTs) were applied as fillers for MMMs synthesis. To improve the filler dispersion and filler-matrix interface affinity, the raw HNTs were modified by either alkali etching or (3-Aminopropyl) triethoxysilane grafting. After surface etching, the defect holes were formed on the surfaces of etched-HNTs, resulting in the rougher HNT walls and significant increment of surface area and CO2 adsorption capacity. The filler/polymer interfacial voids and filler dispersion were quantitatively assessed by tomographic focused ion beam scanning electron microscopy. HNTs surface etching significantly improved the HNTs/polymer interfacial affinity (void% = 0.06% for Raw-HNTs MMM, 0.02% for Etched HNTs MMMs) and filler dispersion, while grafted-HNTs mainly contribute to the filler dispersion. Compared to the pure polymer membrane and MMMs with untreated HNTs, MMMs containing 10 wt.% etched HNTs filler exhibited both increased CO2 permeability (807.7 Barrer) and higher CO2 selectivity (CO2/CH4 selectivity of 27.8) on the well-known limit of Robeson upper bound. In contrast, grafting HNTs only increased the membrane permeability without enhancing CO2 selectivity. The results suggest that surface etching can be an effective route in filler modification to improve interfacial morphology and membrane separation performance. (C) 2016 Elsevier B.V. All rights reserved.

Carbon Nanotube-Based Mixed-Matrix Membranes with Supramolecularly Engineered Interface for Enhanced Gas Separation Performance

Study On Co2 Facilitated Separation Of Mixed Matrix Membranes Containing Surface Modified Mwcnts

MOF Nanosheet-Based Mixed Matrix Membranes with Metal-Organic Coordination Interfacial Interaction for Gas Separation.

Mixed Matrix Membranes Based on Nanoparticle, Nanorod, and Nanosheet MFI-Type Zeolites for Gas Separation

Surface-Etched Halloysite Nanotubes in Mixed Matrix Membranes for Efficient Gas Separation

Synthesis and Properties of Sulfonated Biphenyl Poly(Ether Sulfone) and Its Mixed-Matrix Membranes Containing Carbon Nanotubes for Gas Separation

Effective enhancement of gas separation performance in mixed matrix membranes using core/shell structured multi-walled carbon nanotube/graphene oxide nanoribbons

Carbon Nanotubes and Graphene Oxide-Based Solvent-Free Hybrid Nanofluids Functionalized Mixed-Matrix Membranes for Efficient CO2/N2 Separation

A Novel Composite Material UiO-66@HNT/Pebax Mixed Matrix Membranes for Enhanced CO2/N2 Separation

Mixed Matrix Membranes Based on MFI Zeolite Nanosheets with Tunable Thickness for CO2/CH4 and H2/CH4 Separation

ZIF-8 Hollow Nanotubes Based Mixed Matrix Membranes with High-Speed Gas Transmission Channel to Promote CO2/N2 Separation

CARBON DIOXIDE/METHANE SEPARATION PERFORMANCE BY MIXED MATRIX MEMBRANE FROM POLYSULFONE/ HALLOYSITE NANOTUBES

Preparation and Enhanced Gas Separation Performance of Carbon/Carbon Nanotubes (c/cnts) Hybrid Membranes

Polymer-incorporated Modified Halloysite Nanotubes for Efficient CO 2 / N 2 Separation

Amino-functionalized NUS-8 Nanosheets As Fillers in PIM-1 Mixed Matrix Membranes for CO2 Separations

Carbon nanotube composite membranes of brominated poly(2,6-diphenyl-1,4-phenylene oxide) for gas separation

PIM-based mixed-matrix membranes containing MOF-801/ionic liquid nanocomposites for enhanced CO2 separation performance

Unprecedented gas separation performance of ITTB/CNT nanocomposite membranes at low temperature by strong interfacial interaction enhanced rigidity

Mixed Matrix Membranes Incorporating Amino-Functionalized ZIF-8-NH2 in a Carboxylic Polyimide for Molecularly Selective Gas Separation

Mixed matrix membranes composed of WS2 nanosheets and fluorinated poly(2,6-dimethyl-1,4-phenylene oxide) via Suzuki reaction for improved CO2 separation

Mixed matrix membranes for CO2 separations by incorporating microporous polymer framework fillers with amine-rich nanochannels