Synergistic effects of CO2 and MgCl2 on heavy metals removal and phosphorus recovery in biochar obtained from pyrolysis of swine sludge

Qi Zhang,De Chen,Wendan Xiao,Shouping Zhao,Xuezhu Ye,Hui Li
DOI: https://doi.org/10.1016/j.jaap.2021.105245
IF: 6
2021-09-01
Journal of Analytical and Applied Pyrolysis
Abstract:<p>Although swine sludge (SS) contains a high level of phosphorus (P) and has the potential to be used as an ideal source to produce P-rich biochar, it has a high heavy metal content, especially Cu and Zn, which limits its use. Herein, the influences of temperature, MgCl<sub>2</sub> addition, and carrier gas on the removal of Cu and Zn and P recovery during SS pyrolysis were studied. The results indicated that the removal efficiencies of Cu and Zn exhibited different tendencies in the presence of CO<sub>2</sub> and N<sub>2</sub>. The removal of Zn in N<sub>2</sub> was higher than that in CO<sub>2</sub> and increased at elevated temperatures; moreover, it was sensitive to chloride addition at 800 and 900 °C during pyrolysis under CO<sub>2</sub>. The atmosphere had a significant effect on Cu removal. The maximum removal efficiency was only 27.91% when SS was treated under N<sub>2</sub>, which remarkably increased after chloride addition under CO<sub>2</sub> at 900 °C, reaching 85.96%. Additionally, the mineral phase compositions and transformations treated under different process conditions were investigated. Ca<sub>5</sub>(PO<sub>4</sub>)<sub>3</sub>Cl and Mg<sub>3</sub>(PO<sub>4</sub>)<sub>2</sub> were the main P-bearing phases in the sludge treated with chloride addition, irrespective of the atmosphere, except for the product obtained at 900 °C under CO<sub>2</sub>, in which Mg<sub>3</sub>(PO<sub>4</sub>)<sub>2</sub> was replaced by Ca(PO<sub>3</sub>)<sub>2</sub>. The gradual transformation from magnesium phosphate to calcium phosphate during pyrolysis affected P recovery and bioavailability. Pyrolysis under CO<sub>2</sub> resulted in a higher P recovery rate and lower bioavailability in the products.</p>
engineering, chemical,chemistry, analytical,energy & fuels
What problem does this paper attempt to address?