Abstract:Developing a high-strength, flame-resistant structural material derived from wood is desirable for advanced applications in the transportation, construction, automotive, and aerospace sectors. Here, a low-cost and high-efficiency top-down method was designed for processing natural wood veneers into lightweight yet strong bulk structural wood-based composites. The composites were produced using delignified wood veneers as a continuous reinforcing material and epoxy resin as the adhesive, followed by hot pressing. Densification of the veneers and good adhesion among the veneers played a pivotal role in the mechanical performance of the composites. A record-high flexural strength of 436.1 MPa and a toughness of 12.3 MJ·m–3 were achieved. Furthermore, the low density of the wood composite led to a specific flexural strength of 323.0 MPa·cm3·g–1, which is significantly greater than those reported for other wood-based composites and some metal materials (e.g., steels and alloys). We also explored the feasibility of using the composite in unmanned drones. In addition, the delignified wood veneers were infiltrated with 1.5% ammonium polyphosphate (APP), which improved the fire-retardant and self-extinguishing properties of the composites. This work demonstrates that high-strength wood products exhibit significant potential in many applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.0c09390.Molding process of DWLC-41.4% with different shapes (Figure S1); delignified wood panels with different lignin removal contents (Figure S2); thickness swelling (24 h) (Figure S3); SEM images of DWLC-0%, DWLC-23.2%, and DWLC-55.1% (Figure S4); micro-CT images (Figure S5); tensile and flexural strength of DWLC-41.4% with and without epoxy resin (Figure S6); photographs of wood veneer pull-out tests: before (left) and after (right) (Figure S7); bonding strength of wood veneer and epoxy resin (Figure S8); microstructure of fracture surfaces of pure epoxy resin (Figure S9); compressive strength of natural birch wood and DWLC-41.4% (Figure S10); mechanical properties and microstructures of DWLCs with and without flame retardant (Figure S11); TG curves of DWLC, 1.5% APP/DWLC, and 2.5% APP/DWLC (Figure S12); mass loss of DWLC, 1.5% APP/DWLC, and 2.5% APP/DWLC after the cone test (Figure S13); TSR curves of DWLC, 1.5% APP/DWLC, and 2.5% APP/DWLC (Figure S14); XPS spectra of P of 1.5% APP/DWLC and 2.5% APP/DWLC (Figure S15); comparison of TTI between DWLC-41.4% and other wood-based composites (Table S1); and XPS analysis of the external char of DWLC-41.4% with and without flame retardant (Table S2) (PDF)Takeoff process of an unmanned drone (Movie S1) (MP4)This article has not yet been cited by other publications.

Lightweight, strong, moldable wood via cell wall engineering as a sustainable structural material

High-Strength and Shape-Memory Epoxy Cellular Material with Wood-Like Architecture

An Energy‐Efficient, Wood‐Derived Structural Material Enabled by Pore Structure Engineering Towards Building Efficiency

Lightweight, High-Strength Wood Prepared by Deep Eutectic Solvent Treatment as a Green Structural Material

Processing bulk natural wood into a high-performance structural material

Multiscale Engineered Waste Wood Particles toward a Sustainable, Scalable, and High‐Performance Structural Material

Laminating Delignified Wood Veneers toward High-Strength, Flame-Retardant Composites for Structural Applications

Scalable and Sustainable Approach Toward Highly Compressible, Anisotropic, Lamellar Carbon Sponge

Shape and Stiffness Switchable Hydroplastic Wood with Programmability and Reproducibility

Hydrogen and covalent bonding synergistically reinforced wood-based composites inspired by nacre

Lightweight reinforced wood beams through compression of its surface layers combined with the removal of lignin and hemicellulose

Strong and Superhydrophobic Wood with Aligned Cellulose Nanofibers As a Waterproof Structural Material

Structure–property–function relationships of natural and engineered wood

Super-strong and flexible wood through cell wall swelling-assisted spontaneously fibers aggregation

Fabrication of High-Performance Densified Wood via High-Pressure Steam Treatment and Hot-Pressing

Development of super dimensional stable poplar structure with fire and mildew resistance by delignification/densification of wood with highly aligned cellulose molecules

An All-Natural Fire-Resistant Bioinspired Cellulose-Based Structural Material by External Force-Induced Assembly

Anisotropic Nature of Lightweight Wooden Metamaterials with Mechanical/Thermomechanical Multistability

Reengineering Wood into a High-Strength, and Light-Weight Bio-Composite Material for Structural Applications

Hydrogen-Bonding-Aided Fabrication of Wood Derived Cellulose Scaffold/Aramid Nanofiber into High-Performance Bulk Material

Anisotropic, lightweight, strong, and super thermally insulating nanowood with naturally aligned nanocellulose