Abstract:The internal temperature of stored biomass needs to be measured to suppress the possible self-ignition at biomass-fired power stations. Acoustic sensing has been proven to be a promising approach to measuring the temperature of stored wood pellets online and non-intrusively. In such a temperature measurement system, a characteristic factor is defined to derive the sound speed from measured time of flight of sound waves. The characteristic factor is updated based on its experimental relationship with the biomass temperature during temperature measurement. When the type, particle size, particle density and bulk density of stored biomass change, whether the relationship between the characteristic factor and biomass temperature needs to be recalibrated needs investigation. Therefore, the relationship between the characteristic factor and biomass property is modelled using the empirical equation of Miki. Then the model is used to analyse the impact of the particle size, particle density and bulk density of stored biomass on the relationship. An acoustic sensing system is constructed to investigate the influence of bulk density for different types of biomass. The system is also applied to measure the temperature of four biomass fuels, including wood blocks, wood pellets, wood chips, and wheat straws. Results show that the relative error of temperature measurements for the four types of biomass is within 3.5%, 5.7%, 6.8% and 2.5%, respectively, over the temperature range from 22.1 degrees C to 74.2 degrees C. The relationship between the characteristic factor and biomass temperature should be re-established for different types of biomass and different particle size distributions.

Moisture estimation by measurement of attenuation of the acoustic resonance mode

An accurate and fast method for moisture content determination

Moisture measurement using porous aluminum oxide coated microcantilevers

A Nondestructive Indirect Approach to Long-Term Wood Moisture Monitoring Based on Electrical Methods

Theoretical and Experimental Study on Transient Measurement of Wood Thermal Properties

Detection of moisture content of particles during drying

A Method of the Measurement of Moisture in IC Packages Using Microwaves

An optimized UMR sensor for non-destructive measurements of moisture in wood

Online Measurement of Moisture Content of Biomass Based on LiDAR Images

Quantitative Evaluation of Moisture in Encapsulant Resin of IC Packages by Microwaves

Moisture Sensor Based on Microwave Resonant

Temperature Measurement of Stored Biomass of Different Types and Bulk Densities Using Acoustic Techniques

A dual-parameters microwave measurement approach for spruce moisture content

Improved methodology of measuring moisture content of wood by a vibrational technique

Calibration of microwave antenna for porous materials moisture evaluation using frequency domain analysis

Moisture content and strain relation in wood by Bragg grating sensor and unilateral NMR

The Principle and Application for Measuring Wood Moisture Content Using Microwave

Quantitative prediction of moisture content distribution in acetylated wood using near-infrared hyperspectral imaging

Online Water Content Determination in Wood Chips Using a Microwave Sensor

Simultaneously Measuring Thickness, Density, Velocity and Attenuation of Thin Layers Using V(z,t) Data from Time-Resolved Acoustic Microscopy.

Comparison of the Moist Material Relative Permittivity Readouts Using the Non-Invasive Reflectometric Sensors and Microwave Antenna