Green Solvent-Based Perovskite Precursor Development for Ink-Jet Printed Flexible Solar Cells

Barbara Wilk,Senol Öz,Eros Radicchi,Feray Ünlü,Taimoor Ahmad,Artur P. Herman,Francesca Nunzi,Sanjay Mathur,Robert Kudrawiec,Konrad Wojciechowski,Senol Öz,Feray Ünlü

DOI: https://doi.org/10.1021/acssuschemeng.0c09208

2021-03-03

Abstract:Within a decade, perovskite solar cells (PSCs) leaped to the forefront of photovoltaic research, rapidly moving toward the industrial phase. Despite the impressive progress in technology development and new efficiency records, there still remains a large scope for further advancement. Utilization of scalable deposition methods and good control of the perovskite crystallization process, especially with industrially compatible fabrication protocols, require more understanding to ascertain reproducible, large-format manufacturing. Here, we report ink formulation development for ink-jet printing of perovskite thin films in ambient conditions. We used the precursor solution on a nonhazardous solvent system, fulfilling industrial requirements. By carefully adjusting the coordination environment of the Pb²⁺ through additive engineering, we were able to tune the nucleation process and achieve uniform, pinhole-free perovskite thin films. Furthermore, we combined multiple characterization techniques with computational methods to analyze Pb-complex structures and evaluate their influence on perovskite formation. Lastly, we applied ink-jet printed photoactive layers into large-area (1 cm²) photovoltaic devices and processed on flexible substrates (PET foil). Inverted (p–i–n architecture) PSCs, based on multication composition, Cs_0.1[(HC(NH₂)₂)_0.83(CH₃NH₃)_0.17]_0.9Pb(I_0.83Br_0.17)₃, delivered 11.4% of power conversion efficiency.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c09208?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c09208</a>.additional solution (inkjet drop analysis, contact angle measurements, and DLS measurements); thin film and device characterization data (UV–vis, NMR, AFM, SEM, and <i>JV</i> curves); and DFT modeling details (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c09208/suppl_file/sc0c09208_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to use a non - toxic solvent system to achieve uniform, pinhole - free perovskite films and improve their photoelectric conversion efficiency when preparing perovskite thin - film solar cells by ink - jet printing technology under environmental conditions. Specifically, the researchers developed an ink formulation based on a non - hazardous solvent system for ink - jet printing perovskite films. By adjusting the coordination environment of Pb\(^{2+}\) and using the additive engineering method, they optimized the nucleation process and achieved uniform, pinhole - free perovskite films. In addition, the researchers combined multiple characterization techniques and calculation methods to analyze the Pb - complex structure and its influence on perovskite formation. Finally, they fabricated large - area (1 cm\(^2\)) photovoltaic devices on flexible substrates and obtained a power conversion efficiency of 11.4%.

### Key issues:
1. **Use of non - toxic solvents**: Traditional perovskite precursor solutions are usually based on highly toxic solvents, which limit their industrial applications. This paper proposes an ink formulation based on non - hazardous solvents to meet industrial requirements.
2. **Preparation of uniform films**: Under environmental conditions, it is a challenge to prepare uniform, pinhole - free perovskite films by ink - jet printing technology. The researchers successfully prepared high - quality perovskite films by using the additive engineering method to adjust the coordination environment of Pb\(^{2+}\) and optimizing the nucleation process.
3. **Improvement of photoelectric conversion efficiency**: By optimizing the ink formulation and film preparation process, the large - area photovoltaic devices prepared by the researchers on flexible substrates reached a power conversion efficiency of 11.4%.

### Main methods:
- **Solvent selection**: γ - Butyrolactone (GBL), 2 - Methylpyrazine (2MP) and Dimethyl sulfoxide (DMSO) were selected as a solvent mixture to meet the requirements of ink - jet printing.
- **Additive engineering**: Thiosemicarbazide (TSC) and Formic acid (FAc) were introduced as additives to control the crystallization process of perovskite by adjusting the coordination environment of Pb\(^{2+}\).
- **Characterization techniques**: Combining multiple characterization techniques such as Dynamic light scattering (DLS), Scanning electron microscope (SEM), X - ray diffraction (XRD), Steady - state photoluminescence (ss - PL), Nuclear magnetic resonance (NMR) and theoretical calculation methods to analyze the influence of additives on perovskite formation.

Through these methods, the researchers not only solved the technical problems of preparing high - quality perovskite films under environmental conditions, but also provided an important basis for future large - scale production and practical applications.