Abstract:Abstract The elasto-plastic material behavior, material strength and failure modes of metals fabricated by additive manufacturing technologies are significantly determined by the underlying process-specific microstructure evolution. In this work a novel physics-based and data-supported phenomenological microstructure model for Ti-6Al-4V is proposed that is suitable for the part-scale simulation of laser powder bed fusion processes. The model predicts spatially homogenized phase fractions of the most relevant microstructural species, namely the stable $$\beta $$ β -phase, the stable $$\alpha _{\text {s}}$$ α s -phase as well as the metastable Martensite $$\alpha _{\text {m}}$$ α m -phase, in a physically consistent manner. In particular, the modeled microstructure evolution, in form of diffusion-based and non-diffusional transformations, is a pure consequence of energy and mobility competitions among the different species, without the need for heuristic transformation criteria as often applied in existing models. The mathematically consistent formulation of the evolution equations in rate form renders the model suitable for the practically relevant scenario of temperature- or time-dependent diffusion coefficients, arbitrary temperature profiles, and multiple coexisting phases. Due to its physically motivated foundation, the proposed model requires only a minimal number of free parameters, which are determined in an inverse identification process considering a broad experimental data basis in form of time-temperature transformation diagrams. Subsequently, the predictive ability of the model is demonstrated by means of continuous cooling transformation diagrams, showing that experimentally observed characteristics such as critical cooling rates emerge naturally from the proposed microstructure model, instead of being enforced as heuristic transformation criteria. Eventually, the proposed model is exploited to predict the microstructure evolution for a realistic selective laser melting application scenario and for the cooling/quenching process of a Ti-6Al-4V cube of practically relevant size. Numerical results confirm experimental observations that Martensite is the dominating microstructure species in regimes of high cooling rates, e.g., due to highly localized heat sources or in near-surface domains, while a proper manipulation of the temperature field, e.g., by preheating the base-plate in selective laser melting, can suppress the formation of this metastable phase.

Morphology evolution of molten pool of β-Ti/Ti6Al4V based on the modified double ellipsoidal heat source model of SLM

Evolution of molten pool during selective laser melting of Ti–6Al–4V

Thermo-Fluid-Dynamic Modeling of the Melt Pool During Selective Laser Melting for AZ91D Magnesium Alloy

Finite Element Analysis of Thermal Behavior and Experimental Investigation of Ti6Al4V in Selective Laser Melting

Numerical simulation of melt pool size and flow evolution for laser powder bed fusion of powder grade Ti6Al4V

Finite Element Analysis and Computational Fluid Dynamics Verification of Molten Pool Characteristics During Selective Laser Melting of Ti-6Al-4V Plates

Numerical Simulation in the Melt Pool Evolution of Laser Powder Bed Fusion Process for Ti6Al4V

Melt pool evolution and microstructure simulation of SLM 316L based on SPH-PFM coupling model

An Analytical Model for Rapid Predicting Molten Pool Geometry of Selective Laser Melting (SLM)

Molten Pool Macroscopic Thermodynamic Analysis During Selective Laser Melting of Alsi10mg: Simulations and Experiments

Modeling and numerical studies of selective laser melting: Multiphase flow, solidification and heat transfer

Modeling on Molten Pool Transport in Laser Deposition Processes by Lattice Boltzmann Method

Development of a Comprehensive Model for Predicting Melt Pool Characteristics with Dissimilar Materials in Selective Laser Melting Processes

A Numerical Study on the Mesoscopic Characteristics of Ti-6Al-4V by Selective Laser Melting

Mesoscopic Study of Thermal Behavior, Fluid Dynamics and Surface Morphology During Selective Laser Melting of Ti-based Composites

Multi-physics simulation of non-equilibrium solidification in Ti-Nb alloy during selective laser melting

Mesoscopic evolution of molten pool during selective laser melting of superalloy Inconel 738 at elevating preheating temperature

A novel physics-based and data-supported microstructure model for part-scale simulation of laser powder bed fusion of Ti-6Al-4V

Residual stress development in selective laser-melted Ti6Al4V: a parametric thermal modelling approach

Transport Phenomena and Evolution Mechanism of the Melt Pool During a Laser-Based Metal Melting Process

Predicting the Porosity Defects in Selective Laser Melting (SLM) by Molten Pool Geometry